Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.  The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF) If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)   Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Double DIN panel for Land Rover Defender Instead of installing many individual devices in the vehicle's cockpit, it often makes sense to install a single, central device - this saves space, labour, wiring and reduces the risk of theft. Modern multimedia devices now combine a variety of functions such as navigation, hands-free system, rear view camera and vehicle diagnostics and can also play a variety of media - in addition to the classic analogue AM/FM radio reception, digital radio DAB is becoming more and more widespread, DVDs can be played in addition to CDs, MP3 files from USB sticks or hard drives can be played and iPhones or iPods can be controlled. WLan access points and the integration of Internet services such as Facebook can also be realised. In the Defender TD4 (from 2007), there is no space for this ex works. The double DIN installation kit offered here creates this space by relocating the switches to the sloping area between the centre console and the steering wheel, facing the driver. Furthermore, it provides space for the installation of any 52mm round instrument - e.g. an exhaust gas temperature or outside temperature display. This installation space can also be closed off by means of a dummy plug supplied. The panel is available in matt or glossy finish. We will be happy to advise you on the installation of your desired unit. We recommend multimedia devices from brand manufacturers such as Kenwood, Alpine or Pioneer. You can also have the double DIN panel installed in our workshop, including the switch and the multimedia device you brought with you (installation only possible up to 7" display).

Retrofit kit electric windows for Land Rover Defender  Electric windows were first introduced in the Defender when the Td5 was overhauled in 2002. All doors and door trims were adapted at that point, so that from MY2002 onwards, even models with manual crank handles in the rear seat doors can be retrofitted with electric openers. The complete electric window opener kit makes swapping or retrofitting dead easy. The assembly kit contains the lifting mechanism, electric wiring, fastening materials, covers and the switches for both rear seat doors.

Door Handle Exchange set Defender until MY2002 In 2002, the Defender’s doors were re-designed to accommodate the first-ever introduction of electric power windows to the line-up. In the overhaul, the door-handles were updated, too. This complete door handle repair kit makes the replacement of broken or worn-out looking door handles in pre-2002 Defenders dead easy. The kit consists of two handles, all required fastening materials and seals, as well as three lock barrels including two keys each. The handles fit front and rear doors.

Great conversion kit for the 2nd row of seats With the introduction of Td4 Puma models from MY2007 onwards, Defenders featured not only a new engine and drive train but also significant changes to the interior. Due to new safety regulations, second row seats and their mounting points required a new layout. Consequently, more recent Td4 back seats will not fit when restoring or converting older pre-2007 models.  Our conversion kit enables you to install post-2007 second row seats in pre-2007 110 Defender Station Wagons. The back seat mounting kit contains a mid-crossmember, two second row seat supports, chassis bracket fixing kits and two adapted front panels for the rear wheel arches. All parts are galvanized.

Rubber floor mat rear, for Defender 110Rubber mat for the 2nd row of the Land Rover Defender 110 Station Wagon 5-door, fits models from 1987 to 2016. Protect the interior of your Land Rover Defender 110 Strong, durable and tailored for a perfect fit, these rubber floor mats will protect your Defender from dirty, muddy boots and shoes. Product Information: Material: RubberColour: BlackPlacement: 2nd rowWeight: 5.47 kgWidth: 480 mmHeight: 25 mmLength: 870 mmScope of delivery: 1 pair

Double DIN Console for TD5, 2002-2007 The MUD Td5 Double DIN Console replaces the factory 2002-2007 Td5 Defender radio bezel with this exclusive, one-piece design that allows you to easily upgrade the original single DIN radio setup to a double DIN head unit. The original Land Rover radio bezel installed in the 2002-2007 Td5 Defender is a fragile unit that can break thanks to a flimsy and poorly designed two-piece assembly that can barely support the weight of the single-DIN head unit. Typically, the separate center panel that contains the head unit/radio breaks off the main console. The MUD Td5 Double DIN Console is a simple DIY upgrade that uses the factory fasteners and requires no cutting, drilling or modification to your dash. Simply remove your old console, replace it with the MUD Double DIN Console, and enjoy the benefits and features of the larger screens found on modern double DIN head units, such as Apple CarPlay & Android Auto screen mirroring. The MUD Td5 double DIN console was designed using CAD 3D scanning technology and uses an injection molding manufacturing process for a factory fit appearance and a perfect fit every time. Available in Matte Black