Das könnte Sie auch interessieren

Only 6 available

Anti-slip pad for Adventure 4x4 Rockslider, 1 pair

Anti-slip pad for Adventure 4x4 Rockslider, 1 pair These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender, Mercedes G and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.

Weight: 0,2 kg
Parcel shipping

Delivery time 5-10 working days

€16.00*

Chequer plate wing top protection for all Land Rover Defender 90/110/130 from MY 2007

Chequer plate wing top protection for all Land Rover Defender 90/110/130 from model year 2007. Made of 3mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design.

Weight: 5,0 kg
Parcel shipping

Delivery time 5-10 working days

€329.00*

Low-lying running board round tube for four-door Defender 110 from 2003 onwards

Low-lying running board round tube for two-door Defender 90/110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.

Weight: 16,0 kg
Freight forwarding

Delivery time 5-10 working days

€629.00*

Low-lying running board round tube for four-door Defender 110 from 2003 onwards

Low running board round tube for four-door Defender 110 from 2003 onwards Low running board for four-door Defender 110 from 2003 onwards The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the body.The running board is black powder-coated and provides a safe step thanks to checker plate supports - even with dirty pipes.Supplied in pairs.You can find a suitable crossbar here.

Weight: 16,0 kg
Freight forwarding

Delivery time 5-10 working days

€869.00*

Ähnliche Artikel

Rocksliders for Suzuki Jimny FJ Side Step

Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The kicks were chamfered so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminumColor: black powder-coatedSize: 129x41x28 cmWeight: 7.60 kg

Weight: 8,0 kg
Parcel shipping

Delivery time 5-10 working days

€449.00*

Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk

Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg The aluminum slider is completely sufficient for light terrain. Scope of delivery: Rock slider left & right mounting material 2x step-installation instructions TÜV certificate ... and with an indescribable look for free

Weight: 8,5 kg
Parcel shipping

Delivery time 5-10 working days

€599.00*

Rock slider for the Jimny GJ and HJ

The rock slider for the Jimny GJ and HJ Tight-fitting rock slider made of aluminum with steel holding structure. To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front. Replaces the original plastic sill protection. The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate. The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected. Our Rockslider is made of high-quality aluminum and black matt powder-coated. We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection. The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit. Scope of delivery:Rockslider left & rightGeneral operating license Facts: Weight complete set (driver & passenger side): 9.kg

Weight: 10,5 kg
Parcel shipping

Delivery time 5-10 working days

€599.00*

Rock & Tree Slider Defender, hot-dip galvanized

Rock & Tree Slider Defender Available for Defender 90 and 110 - Please select the appropriate variant. The item is supplied hot-dip galvanized! Surface treatment with RAPTOR is possible. You can find matching products here.

Weight: 25,0 kg
Parcel shipping

Delivery time 5-10 working days

From €659.00*

Select version

Abenteuer4x4 - Rockslider - for Land Rover Defender

Name: Abenteuer4x4 - Rockslider - for Land Rover Defender
Brand: Nakatanenga
SKU: RSA4X4-110-PB
Price: 1249.0 EUR
Availability: OutOfStock

€1,249.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ made of stainless steel ✔️ incl. mounting material ✔️ available for Defender 90/110/130CC ✔️ best quality ✔️ fast shipping

Delivery time 5-10 working days

Vehicle model

Set

Product number: RSA4X4-110-PB

Product information "Abenteuer4x4 - Rockslider - for Land Rover Defender"

Abenteuer4x4 - Rockslider - for Land Rover Defender

The stainless steel Rockslider by Abenteuer 4x4 for the Land Rover Defender 90/110/130CC convince by a completely new design, low weight (approx. 12 kg/piece) and an easy mounting without drilling.

To increase rigidity, two webs are welded on the back and the slotted holes on the long side are turned inwards.

The Rocksliders not only serve to protect the bodywork, but also provide a secure foothold thanks to their non-slip surface made of drawn knobs, and their shape also protects against excessive dirt in the field. There are several openings on the underside for rinsing out dirt that has been picked up.

The Rocksliders - made in Germany - are powder-coated black. Delivery includes fixing material.

This item is bulky goods.

Material: stainless steel, black powder coated
Material thickness: 3mm

Delivery:

1 set Rockslider stainless steel (left & right)
Bracket and fixing material
Set of screws stainless steel

As a useful add-on, there are matching anti-slip pads for the Rockslider.

You can find a suitable crossbar here.