Winch Accessories

Winch hook XL white / XXL white Often little attention is paid to an important detail on the winch: the hook. It is of crucial importance for the transmission of power between the winch and the anchorage point and must also be able to be operated safely in stressful situations. We offer two models from the industrial sector that shine with convincing detailed solutions: large radius of the hook so that even double straps can be securely hooked in twice large opening of the hook, it can be placed around most towbars stable cast iron snap (not made of thin sheet metal) that closes securely can be dismantled, thus simple assembly / disassembly of the rope without splicing, e.g. easy cleaning of the plastic rope possible large radius of the rope holder, so ropes with a large diameter and / or rope thimble can be used  Actual weight (XL): 0.750 kg Actual weight (XXL): 1.445 kg While the smaller model XL is designed for winches up to 10,000 lbs traction, the XXL models can be equipped with winches up to 18,000 lbs traction. The minimum breaking load is 18.000 kg or 32.600 kg. The hooks are made of alloyed, tempered steel, grade 8 and are painted. They are suitable for steel and plastic ropes with or without a thimble, the ropes can be installed without splicing. Please select the model. Please note: The delivered color may differ from the pictures.

Winch rope 10 mm x 30 m Steel or synthetics? With winch ropes that is often something of a religious question. However, the trend is now quite clearly to high-performance synthetic fibers, the steel in the ratio strength to weight are often superior and otherwise bring in handling many benefits.  The advantages of our 30 m synthetic rope compared to steel are manifold, but above all there are two main arguments: safety and weight. When steel cables break, heavy, sharp-edged metal lashes through the air uncontrollably, causing damage and the worst possible injuries. Should our new 2.3 kg light rope really reach the 9.5 t breaking load once, the ends will simply fall to the ground. Even when handling the steel cable, cuts caused by loose or broken wires are not uncommon, but excluded in synthetics. In addition, the much lighter Dyneem rope not only relieves the operator, the car also benefits in terms of statics and driving characteristics. Synthetic ropes are low maintenance, washable, easy to roll up and down due to low friction, and are less sensitive to UV, chemical and oil products, abrasion and fatigue due to kinking than many other synthetic fibers. They absorb hardly any water and are extremely flexible with a low length elasticity of around 5%. The high-quality workmanship of our synthetic rope is shown in detail:To accommodate the pull hook in the eye splice, the 12mm thimble is made of stainless steel, as well as the 7 mm eyelet for attachment to the winch. Additional protection against frictional heat and abrasion is provided by polyester protective sleeves on both ends of the rope. So that nothing rubs off or splices at the splices, they are hot-shrink-sealed. The Nakatanenga winch rope is available in gray or orange. The price of 149 € is already an announcement in this quality. It is even cheaper in a bundle with rope and hook for 189 €. Technical specifications:Dimensions: 10 mm x 30 mWeight: 2.3 kgBreaking load: 9.5 tNumber of fibers: 12 inside, 24 outsideLength flexibility: 5.2% Hole spacing winch window: 10 inch / 254 mm

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear.The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system.It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch, Color: black: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch, Color: black: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

PUNDMANN electric winches bundle with plastic rope In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. Control options: IP68, waterproof up to 1m deepRemote control: radio and cable control in one: Light signal in case of overload, weak battery Technical data of the cable winch 75909: Maximum tractive force: 4537 Kg Mains voltage: 12V Pulling speed (empty): 7.3 m/min Pulling speed (loaded): 1.5 m/min Dead weight: 25,9 kg Drum (ØxLength): 70x224 mm Total size (LxH): 540 x 229 mm Rope diameter: 10 mm Rope length: 30 m Technical data of the cable winch 75784: Maximum tractive force: 5443 Kg Mains voltage: 12V Pulling speed (empty): 6.7 m/min Pulling speed (loaded): 1.5 m/min Dead weight: 26,5 kg Drum (ØxLength): 70x224 mm Total size (LxH): 540 x 229 mm Rope diameter: 10 mm Rope length: 30 m Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less. The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Bundle consisting of: 1 x cable winch PUNDMANN 75909 or 75784- please select the appropriate variant1x radio and cable control (combination)1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optional: without headlight, with 70mm Nolden spotlight black, with 70mm Nolden spotlight chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.

Winch Mounting plate for easy attachment of your winch The mounting plate allows the inconspicuous and easy installation of a common winch behind your original bumper. The winch is better protected against weather conditions.  Available for different vehicles and models - please select the appropriate variant. In the tab "manual / Data sheet" you will find all installation instructions. 

Electrical plug as quick connector Electrical plug in two sizes for 12/24V, 2-pole, as quick connector for winches, jumper cables, etc. The plug is used to lay the battery connections out of the battery box in order to be able to connect the above-mentioned power consumers quickly, conveniently and without the risk of a short circuit.Connection data:Plug small: max. 50 Amp. - max. 5 mm cable diameterLarge plug: max. 175 Amp. - max. 10 mm cable diameterDimensions:Large = length: 8 cm ; width: 5.5 cm ; height: 2.5 cmSmall = length: 5 cm ; width: 3.5 cm ; height: 1.5 cmScope of delivery:Plug (can be used universally as plug or socket).2 contactsProtective cap

Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery. Technical data: Transmission 3-stage planetary gear max. Tractive force 4300 kg max. Pulling speed 15 m/min* Motor power 3.8 hp Engine type Series Wound** Reduction ratio 110:1 Max. Power consumption 530 amps Voltage 12 V Rope (∅ x length) 10 mm x 30 m Drum (∅ x length) 63 x 223 mm Overall size (LxWxH) 574 x 160 x 225 mm Weight of cable winch 29.1 kg Weight of installation set 13.6 kg Total weight 42.7 kg Installation time 5 hours Features: Motor IP67 sealed by groove with sealing ring Freewheel lever Stainless steel cross braces Reinforced cable drum Powder-coated aluminium die-cast housing Motor/gearbox Internal drum brake with 3 brake shoes Removable control unit (so that the control unit can be installed as required) Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.

Cover for winches Winches are by their very nature tough pieces of equipment but as with most mechanical devices, it is easy to underestimate the negative effects caused by exposure to weather, chemicals and physical strains. Rainwater, ice, salt, mud and gravel can affect more than just the looks of your winch. In the worst case, constant exposure to environmental stresses can reduce the performance by a few, possibly decisive percent. Synthetic winch ropes for instance are especially vulnerable to UV radiation. An increasing number of technical experts are therefore calling for mandatory covers for car winches. Our protective winch cover will help you shield your expensive kit from unnecessary damage and will keep it shipshape for your next mission. The softshell cover is light and elastic, fitting most winches by various brands. As with most of our textile products, the cover is quality Made in Germany.  Dimensions: 48 cm x 7/20 cm x 20 cm (LxWxH), suitable for many winch types and brands, measured unstretched Material: softshell

In the module chain from the winch to the hook, winch windows play an important but often underestimated part. Once you have opted for ultra-light but high-strength synthetic mountain equipment, the rope windows are indispensable for safe and comfortable use. But winch window is not the same as winch window: a quality product improves handling and extends the service life of the ropes even more. That's why we now set up our own Nakatanenga winch window made of hard anodized aluminum. Harteloxal is an electrolytically produced outer layer which, in addition to improved wear, corrosion and UV protection, also achieves excellent sliding properties. With these characteristics, the rope window conforms to military standard MIL-A-8625F TYPE III. In addition, our winch window is also significantly lower than many other products on the market. This guarantees a smaller bending angle when the rope is rolled up. This protects the synthetic fibers and ensures that dirt is wiped well before the rope winds on the roll. The Nakatanenga winch window can be ordered bundled with the 30m synthetic rope in gray or orange, with or without winch hooks. Material: aluminum, hard anodizedColor: dark grayHole spacing: 10 inches / 254 mm The Nakatanenga winch rope is available in gray or orange. In the bundle, the rope is also available with the matching winch hook and winch window made of hard anodised aluminum - the bundle can be found here.

Twin USB 4.2A installation socket, 2x USB, with 2x 2.1A charge current, protective cover. This socket can bei either fitted direcly (dash panel, cubby box, cupboard, etc.) or into a mounting frame (single, double, triple). Please ensure adequate fuse protection! Can also be used in the standard 29mm cigarette lighter recess as used on many vehicles. Comes with lock nut and cover.  

Factor 55 Winch Lock Assembly The 3 / 8-16 in. Winch lock screw is made of 1045 carbon steel. Thanks to the 60 degree head, the screw can't be removed with ordinary screwdrivers, pliers or commercially available safety inserts. Simply replace your winch mounting bolts with the Factor 55 Winch Locks and your winch is optimally protected against theft! As a replacement for any easily removable 3 / 8-16 " lock screw. The locking screw can be attached to any 1987 - 2014 Jeep YJ, TJ, JK or JL Wrangler with a mounted winch. ✓ Winch Lock✓ Heat Treated 1045 Carbon Steel✓ Zinc Chromate Corrosion Protection✓ Hidden Spring Lock Washer Pocket✓ 60 Degree Head Taper to Prevent Removal with Pliers✓ Simple Fail Proof Design✓ 3 Inches by 3 Inches by 1 Inch, 1 Pound✓ Universal Application for Any Jeep Wrangler

For customers who need a winch on their Land Rover Defender but do not want the classic, martial look of a "normal" winch bumper we've developed the Hidden Winch Mount Kit. It is suitable for all Land Rover Defender 90/110/130 and allows an well hidden mounting of many common winches while maintaining a very "civil" look. In addition to the discreet appearance, the Nakatanenga Hidden Winch Mount Kit has many other product advantages: Improved slope angle of the vehicle by raised corners of the bumper Improved protection of the vehicle front by stable construction Protection of the rope against UV rays (important for plastic ropes!), rain and dust Improved theft protection due to hidden mounting location Suitable for vehicles with or without air conditioning (depending on the vehicle cutouts may be required on the grille) The freewheel of most winches is still accessible (you don't need a winch with an externally controllable freewheel) Integrated underrun protection (optionally aluminium natural or black powder-coated) to protect the steering linkage No repositioning of the license plate We recommend the following winches for use with the Hidden Winch Mount Kit: Superwinch TigerShark 9.5SR Superwinch TigerShark 11.5SR Superwinch Rock 98 Superwinch Rock 12.8 Among other winches, the following winches can not be used: Superwinch Talon Warn 8274 The bumper must be registered in the vehicle documents. This can be done by a fee-based individual acceptance. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.

Nakatanenga cable set winch mounting in Defender In order to facilitate the installation of the winch in the Defender and to minimise sources of error, we have a complete cable set for this purpose mass-produced by a cable harness manufacturer. The cable lengths are adapted to the installation situation in the Land Rover Defender 90/110/130. Due to the cable cross-section of 50 mm², even high currents can be transmitted safely, so that enough current reaches the cable winch and is not converted into heat in the cable. Delivery includes tubular cable lug M10 and battery pole clamp minus M10, for mounting on the vehicle's wiring.

A universal winch plate that fits to most vehicles given that custom brackets are made to fit the winch plate to the vehicle.

Steel winch cable 25m Winch steel cable with 8 mm cross-section, 25 m, with safety hook and end piece.

Mounting plate 166.4mm x 114.3mm Universal mounting plate for winches, with standard hole pattern 6.55" x 4.5" (166.4 mm x 114.3 mm) and pulling force up to 5,000 lbs (fig. similar).

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

WATERTIGHT RELAY BOX for winches with series wound motors. (3x positive cable, 1x earth) Protection class IP56k = protection against strong jets of water under increased pressure (flooding) Loadable up to 600 amps continuous load and therefore sufficient for all winches up to approx. 5.5 to pulling force.Very compact design.

Radio remote control for 12 V cable winches, for internal mounting on the relay box, can be used for a wide range of cable winches.

Spare fuse 425 amp for winch

Winch hook with a max load of 2000kg for use with 7-8mm cable and a loop. The hook is made from high-quality steel and is made in the EU. Thanks to the generous design the hook is very easy to use.