Ähnliche Artikel

Slot nut for airline rails steel galvanized M6, fitting 2xM6

Sliding block for airline rails, galvanized steel M6, fitting 2xM6

Sliding block for airline rails, galvanized steel M6, fitting 2xM6 Ideally suited for attachment to lashing rails. Galvanized, 2x M6 thread

Product number: NA-NUT2M6

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€3.00*

Single Stud Automotive, does not rattle

Single Stud Fitting For airline cargo lashing rails, load capacity 300 kg, ring diameter 40 mm, manufactured according to ISO 9788, anodised aluminium, UV and salt water resistant. This single stud also fits our Cargobear. Please note: Depending on availability, the Single Stud is delivered in blue or grey.

Product number: NAZSAUTOST-1M

Weight: 0,7 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €3.50*

Select version

Lashing rail accessories, screw fitting M8x45 with star handle

Lashing rail accessories, screw fitting M8x45 with nut and washer.

Product number: NAZSFITTING-STERN

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€9.00*

Cargo Rail Nut 2.0

Cargo rail nut 2.0 available in size M8 and V4A precision casting and thus best suited for exterior use. The nut is held securel in place with the stainless clip and can stay in place all the time. This makes it interesting for interior use, too, e.g. when fixtures have to be removed temporarily from the vehicle and will be fitted to the same place again. There are no protruding bolts, the nut can stay at its place, fitting is facilitated as the clip can cope with lateral force before fully tightening down, too. Once torqued down, the ribbed outer of the nut tightly grabs into the cargo rail, preventing any twisting or movement under load. The cargo rail nut 2.0 allows flush fitting of optional equipment and fixtures as the nut sits level with the rail and does not protrude above it. Additionally the clip acts as a washer, thus increasing the contact area, expecially in the rounded version of the airline cargo rails, while also protecting painting/anodisation. Four markers facilitate to mark the drill centre. Advantages: rustfree - nut made of high-quality V4A precision casting, clip of stainless EN 1.4310 steel simple handling - fit nut, secure with clip, bolt on equipment innovative - can be fitted to ANY part of the cargo rail and doesn't have to be pushed in from the side nut sits level and does not protrude - equipment can be bolted on flush secure - sits securely in the rail and stays where it was fitted - does not get out of place, even with nothing bolted to it. Markers in the clip to facilitate drilling, clip acts as a washer.

Product number: ZSM2

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€12.00*

Lashing rail fitting, double stud

Lashing rail fitting, double stud Double stud fitting for airline cargo lashing rails, load capacity 1,100 kg, ring diameter 40 mm, manufactured according to ISO 9788, galvanised steel, UV and salt water resistant.Please note: The studs are delivered either in yellow passivated or silver passivated, depending on availability.

Product number: NAZSDST-1M

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €4.50*

Select version

High-tensile Aluminium Airline Cargo Rail, 1,975m, 1.4kg

High-tensile aluminium airline cargo rail with anodized outer, UV and saltwater resistant, length: 1.975 m, weight: 1.4 kg, price per metre: EUR 17,-; dimensions: 50x1,975x12 mm. Not approved for passenger transport or aviation. These airline cargo rails made to our specifications cater for the market niche between cheap low-cost offers of dubious quality and high-priced rails for passenger transportation or aviation use. Our cargo rails are best suited to secure loads and fixtures in expedition vehicles, on roof racks or load bays.

Product number: NAZS2MM

Weight: 3,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €34.00*

Select version

Airline mounting rail, screw fitting with M8 nut

Name: Airline mounting rail, screw fitting with M8 nut
Brand: Nakatanenga
SKU: NAZSFITTING-M8X45
Price: 8.0 EUR
Availability: InStock