Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm

How do you improve the CargoBear? By clicking our rubber covers into fully or partially unused lashing openings in the rack. With our 30 mm wide and 10 cm long strips, you can quickly and securely seal the gaps. The rubber covers give you a whole range of noticeable advantages. Firstly, they improve load safety on the already very slip resistant CargoBear even further. When you position the cargo on top of the rubber strips, the ribbed surface structure prevents the lashed down cargo from sliding. A second effect is created by the rubbers’ added height of 3.5 mm, which lifts the cargo off the actual rack, preventing scratching or damages to both. And last but not least, the covers also prevent vegetation from getting trapped or stuck in the sideways rails when off-roading. The covers sport rounded edges for a better fit. The rubber cover strips for the CargoBear can be ordered in sets of 6 or 24 respectively. One crossbar requires a set of 6 for Defender, Jimny or G-Class. A set of 24 covers one cargo panel with the above-mentioned 4x4s, i.e. the minimum configuration of 2 cross bars and one panel requires 2 sets of 6 and one set of 24. If you have any questions, don’t hesitate to get in touch.

Sliding block for airline rails, galvanized steel M6, fitting 2xM6 Ideally suited for attachment to lashing rails. Galvanized, 2x M6 thread

Single Stud Fitting For airline cargo lashing rails, load capacity 300 kg, ring diameter 40 mm, manufactured according to ISO 9788, anodised aluminium, UV and salt water resistant. This single stud also fits our Cargobear. Please note: Depending on availability, the Single Stud is delivered in blue or grey.

Lashing rail accessories, screw fitting M8x45 with nut and washer.

Saving Bundle! Here you get the perfect set for your load securing! Simply add additional attachment points to your vehicle.The lashing points and single studs are flexible and therefore always in the right place!Fast and safe installation. One bundle consists of:6 pieces lashing points (diameter 45 mm, thickness 10.3 mm)6 pieces Single Stud (load 300 kg, ring diameter 40 mm, anodized aluminum, UV and salt water resistant) 5 sets (30 pieces lashing points + 30 pieces single studs) cost only 100€! Only while supplies last!* Compared to single purchase

Single stud fitting for airline cargo rails Working load: 300 kg Ring diametre: 40 mmMaterial: anodized aluminium Made according to ISO 9788, UV-light and saltwater resistant.

Lashing rail fitting, double stud Double stud fitting for airline cargo lashing rails, load capacity 1,100 kg, ring diameter 40 mm, manufactured according to ISO 9788, galvanised steel, UV and salt water resistant.Please note: The studs are delivered either in yellow passivated or silver passivated, depending on availability.

High-tensile aluminium airline cargo rail with anodized outer, UV and saltwater resistant, length: 1.975 m, weight: 1.4 kg, price per metre: EUR 17,-; dimensions: 50x1,975x12 mm. Not approved for passenger transport or aviation. These airline cargo rails made to our specifications cater for the market niche between cheap low-cost offers of dubious quality and high-priced rails for passenger transportation or aviation use. Our cargo rails are best suited to secure loads and fixtures in expedition vehicles, on roof racks or load bays.