Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16" ET -5

 LOF Clutches ROADspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original) DescriptionPerfect for vehicles with a Stage1 map/ Towing 1x LOF HD Drive plate, fitted with Woven organic friction 1x LOF HD ROADspec clutch cover, +20% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Suzuki Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15   With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*. a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT) 1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping ) only 1 part certificate will be delivered, NO tyres, NO rims etc. ! the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery. the use of snow chains is not permitted ! there is NO brand binding for the tyres ! NO additional mudguard extensions are required ! it is NOT possible to send the certificate by e-mail or fax !    

Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.

Wheel spacer for SUZUKI Jimny II Suitable for Jimny II type GJ from model 2018 and type HJ Only the following wheel/tyre combination is listed in the parts certificate: Wheel spacer from TREKFINDER 44 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacer from TREKFINDER 50 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacers from TREKFINDER 56 mm for 2 axles195/80 + 205/75 and 215/75R15 The Trekfinder 56 mm wheel spacer for 2 axles is available with and without mudguard widening. Colour: Trekfinder: silver aluminium

Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.

TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.