Ähnliche Artikel
Dotz Dakar 7x16 "ET0 and 6x15" suitable for Defender, Mercedes G and Jimny II GJ HJ
From
€110.00*
Dotz Dakar Steel Rim
The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released for a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims.
We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim in two sizes: as 7x16” or 6x15” with an offset of 0 mil. The larger 16” wheel rims are available in silver, the smaller 15” ones are available in both silver and Dakar Dark, which is to say glossy black – a premium look for any 4x4.
The Dakar’s style not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim.
Including certification documents.
Size:7 x 16" / ET 0.0 Silver6 x 15" / ET 0.0 Silver or glossy black
Product number:
ORPNSM
Complete wheel set Jimny II GJ HJ Dotz Dakar with BF Goodrich All Terrain
From
€1,640.00*
Wheel set Dotz Dakar Steel Rim and BFGoodrich All Terrain Tire A bigger footprint with Dotz Dakar Steel Rims and BFGoodrich All Terrain tires not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim. The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released as a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims. We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim with sizes 7x16” with an offset of 0 mil. A great rim needs an equally great tire and with the BFGoodrich All Terrain there’s no doubt that it’ll be up to the challenge. As a proven all-season multi-purpose tire, the latest T/A KO2 generation boasts even more improvements and better test results over its predecessor: the tire’s sidewalls are 20% more robust, durability doubles on gravel and adds another 15% on asphalt. Traction is also improved with an increase of 10% and 19% for slush/mud and snow, respectively. As far as the look is concerned the tire can be mounted with the white print to the in- or the outside. Certification documents are included. The wheel sets are available with or without spare wheel. The tire is suitable and permitted for winter use. Size:Rim 7 x 16" / ET 0.0 Silver wie tire size 225/75R16*Rim 7 x 15" / ET 0.0 Silver with tire size 215/65R16 * Required Modifications for 16” Wheel Set This wheel set size requires a suspension raising kit. The speedometer requires a ratio adapter. The wheel arch covers need to be adapted. Please let us know when ordering whether the white lettering is to be mounted inside or outside.
Product number:
BFGATKO2-21565ORPNS4M
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5
From
€359.00*
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5
After the great response to the J-01 wheel, we wanted to do something different with the second original design.
We present you the HIGH PEAK J-02. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport.
Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU).
TÜV type approved and strength tested.
Also compatible with JB43 (1998-2018) models.
Made in Italy.
Guaranteed European quality
Bolt-on mounting with standard or raised chassis.
No additional modifications required (depending on tyre size).
Diameter : 15Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : matt black, anthracite, matt bronze or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ
If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644
Product number:
HIGHPEAK-02-SUJI2-AM
Das könnte Sie auch interessieren
Front wind deflectors (1 set) for driver and passenger side Suzuki Jimny 2, ab Bj 2018, smoke grey
€85.00*
Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Jimny 2 does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows.
There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Jimny windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders.
Wind deflectors by ClimAir for Jimny 2, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air.
ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.The wind deflectors are available in pairs for the front doors.
Product number:
NACLI003P0062-G
CargoBear awning holder for Jimny 2 GJ / HJ roof rack CargoBear
€54.00*
One of the best moments when car camping or attending a 4x4 meeting is when you unfold your side awning from the roof rack. It means you’ve arrived and all the enjoyment is ahead of you. Sheltered by the tarp, you can rest easy in your camping chair, put your feet up and think about the things to come over a coffee or a cold one.
Since there is now a CargoBear for the Jimny II, you can also mount a variety of car awnings on it. Our mounting brackets are made from black powder-coated stainless steel and are fixed to the lateral incline of at least two CargoBear cross bars. They fit amongst others the RoofLodge Awning, RhinoRack Foxwing and RhinoRack SunSeeker.
All fixing materials to the roof rack are included. Not included is the fastening material for the awnings themselves.
suitable for all CargoBear 1 + 2.
Product number:
CGB2-SUJI2-MH
Complete wheel set Jimny II GJ HJ Dotz Dakar with BF Goodrich All Terrain
From
€1,640.00*
Wheel set Dotz Dakar Steel Rim and BFGoodrich All Terrain Tire A bigger footprint with Dotz Dakar Steel Rims and BFGoodrich All Terrain tires not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim. The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released as a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims. We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim with sizes 7x16” with an offset of 0 mil. A great rim needs an equally great tire and with the BFGoodrich All Terrain there’s no doubt that it’ll be up to the challenge. As a proven all-season multi-purpose tire, the latest T/A KO2 generation boasts even more improvements and better test results over its predecessor: the tire’s sidewalls are 20% more robust, durability doubles on gravel and adds another 15% on asphalt. Traction is also improved with an increase of 10% and 19% for slush/mud and snow, respectively. As far as the look is concerned the tire can be mounted with the white print to the in- or the outside. Certification documents are included. The wheel sets are available with or without spare wheel. The tire is suitable and permitted for winter use. Size:Rim 7 x 16" / ET 0.0 Silver wie tire size 225/75R16*Rim 7 x 15" / ET 0.0 Silver with tire size 215/65R16 * Required Modifications for 16” Wheel Set This wheel set size requires a suspension raising kit. The speedometer requires a ratio adapter. The wheel arch covers need to be adapted. Please let us know when ordering whether the white lettering is to be mounted inside or outside.
Product number:
BFGATKO2-21565ORPNS4M
Speedometer calibration kit for Suzuki Jimny II GJ und HJ (default: 106%)
€599.00*
Speedometer calibration kit for Suzuki Jimny from 2018 (Type GJ und HJ)
This tachometer calibration kit can be used to correct the speed display and distance counter for vehicle conversions with a tire roll circumference that differs significantly from the series.Changes to the differential or larger tire roll circumference can thus be made acceptable.The ABS / ESP control unit sends a speed signal to the instrument cluster via CAN bus. The speedometer calibration kit is installed in front of the instrument cluster and corrects both the speed signal and the odometer in real time. The correction factor can be programmed via USB interface.
The original wheel speed signals are retained. The function of the ABS / ESP control unit can therefore not be impaired.
Technical specifications:EC type approval: E1 10R-036407Correction factor: 1-255%Default: 106%Power supply: 6-30V DCPower consumption sleep mode: 10 mACurrent consumption max .: 35 mATemperature range: -40 ° C / + 125 ° CDegree of protection: IP68
Also available for other vehicles on request.
Product number:
TACHKALKIT-SUJI2
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
€599.00*
Side skirts with aluminum steps
The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points.
Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg
The aluminum slider is completely sufficient for light terrain.
Scope of delivery:
Rock slider left & right
mounting material
2x step-installation instructions
TÜV certificate
... and with an indescribable look for free
Product number:
HSJ2RSA02
Rock slider for the Jimny GJ and HJ
€599.00*
The rock slider for the Jimny GJ and HJ
Tight-fitting rock slider made of aluminum with steel holding structure.
To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front.
Replaces the original plastic sill protection.
The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate.
The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected.
Our Rockslider is made of high-quality aluminum and black matt powder-coated.
We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection.
The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit.
Scope of delivery:Rockslider left & rightGeneral operating license
Facts: Weight complete set (driver & passenger side): 9.kg
Product number:
HSJ2RSA01
CargoBear 2.0 crossbar - for Suzuki Jimny 2, GJ
From
€299.00*
CargoBear Roof Rack Crossbar
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks.
The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper.
If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material.
Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space)
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Suitable for all Cargobear 2 roof racks
Product number:
CGB2-SUJI2-LB1M
CargoBear wind deflector for Jimny 2 CargoBear roof racks
€169.00*
Wind deflector suitable for CargoBear 2.0 Suzuki Jimny 2 (GJ)
Material: aluminum, black matt powder-coated
Incl. mounting material
Product number:
CGB2-SUJI2-WIND
Sunnyboy set for rear side windows and rear window for Suzuki Jimny 2, ab Bj 2018
€119.00*
One of the many strengths of the Jimny II is its great 360 panoramic view, rare for a 4x4. But the large windows – relative to car size – have one big disadvantage: the heat build-up on hot days is considerable and that’s especially problematic for a car that is a preferred mode of transport for pets and working dogs.
Whether with or without air conditioning, the ClimAir SONNIBOY sun and privacy screens make your vehicle on hot days much more comfortable when you’re driving, when the car is parked or when you have to leave children or pets behind while shopping for example. The three elements making up the SONNIBOY kit are tailor-made to fit rear and rear side windows of the Jimny II. Moreover, they simply click into a sturdy, hardly noticeable and easy to install fastening system.
And since most Jimny II’s are real work horses, the privacy screen feature is also of great value. Tools, hunting equipment or sports gear are discreetly kept from prying eyes whereas dogs and other pets feel a lot calmer and less exposed. The all-round visibility for driver and passengers from the inside isn’t diminished either due to the material’s special surface structure. And when compared to dark window films, the obvious advantage is the fact SONNIBOY nets can be removed whenever you need to.
SONNIBOY sun and privacy screens by ClimAir offer quality Made in Germany.
Product number:
NACLI10090BC-B
LOF CLutches POWERspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit
€289.00*
POWERspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit
The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original)
Description
Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading
1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient
1x LOF HD POWERspec clutch cover, +40% Clamp load over original
1x LOF HD release bearing
6x Clutch cover bolts, coated in loctite
1x Jimny Pilot/ spigot bearing
1x Clutch alignment tool from LOF
10ml Spline assembly grease
2 year LOF Warranty
Product number:
LOF-21551P
LOF Clutches ROADspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit
€210.00*
LOF Clutches ROADspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit
The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original)
DescriptionPerfect for vehicles with a Stage1 map/ Towing
1x LOF HD Drive plate, fitted with Woven organic friction
1x LOF HD ROADspec clutch cover, +20% Clamp load over original
1x LOF HD release bearing
6x Clutch cover bolts, coated in loctite
1x Suzuki Pilot/ spigot bearing
1x Clutch alignment tool from LOF
10ml Spline assembly grease
2 year LOF Warranty
Product number:
LOF-0853
Alpha 9.9 winch system for Suzuki Jimny FJ
€2,499.00*
The Power Winch System Beta for the Suzuki Jimny
The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes.
Technical data:
Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours
Features:
Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation set
Cable winch
Aluminium cable window
Fastening screws
Plastic rope with hook
Pulley with hook
Cable remote control
Radio remote control
Operating instructions
TÜV parts certificate
Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.
Product number:
HSW9900JIMX
CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ
€329.00*
Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ
Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks.
Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks.
The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.
Product number:
CGB2-SUJI2-LADDER
Parts certificate TREKFINDER for tyre conversion SUZUKI Jimmy II Type GJ/HJ
€119.00*
Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15
With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre
for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*.
a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT)
1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping )
only 1 part certificate will be delivered, NO tyres, NO rims etc. !
the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery.
the use of snow chains is not permitted !
there is NO brand binding for the tyres !
NO additional mudguard extensions are required !
it is NOT possible to send the certificate by e-mail or fax !
Product number:
1-SUJI2TURHJ
Installation kit Suzuki Jimny GJ / HJ with Nolden 90mm combination fog light with daytime running light
€323.00*
Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights
Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life.
With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light.
Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play.
If you only need the adapter cables, you can find them here.
The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights.
Scope of delivery:
1 x pair of Nolden 90 mm LED daytime running/fog lights chrome
Adapter:
2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.
Note:
The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard.
Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).
Product number:
EIBASET-SUJI2-NO90
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
€19.00*
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Product number:
CBLSUJI2
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), BJ 2018
€479.00*
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), MY 2018
A volume of up to 863 liters will fit into the back of your Jimny GJ. Sounds like a lot for the size S hardcore off-roader. But wait: how much of it can you actually use? Only rarely will you load big items in one piece – let’s say a fridge for example – into the cargo space of the little 4x4 and that’s the problem. The Jimny is mostly a specialized working vehicle for farmers, forest workers and hunters. That means, there’s always lots of tools, fuels, lubricants, equipment, feed bags and dirty clothes that you don’t want to pile up on the small surface area of the cargo hold. Add animals – dead and alive – to the mix and you get the picture.Once we’ve spotted this particular problem, we immediately set to work on it and are now offering a mini-version of our CargoBear system specifically for the back of the Jimny GJ/HJ. This rack effectively partitions the narrow but high cargo space and lets you load many more items much more effectively. Rough and dirty things below, tools, equipment, jerry cans, boxes etc. on top of the shelf.As with our CargoBear roof racks, the cargo shelf is made from robust, powder-coated aluminum plates. Raised edges, non-slip perforation and a great number of lashing points guarantee 100% secure transport.When you’re installing our Tiny Bear cargo rack you can use the pre-existing screw holes. There’s no need for drilling new ones. But you should keep the spare seats in the back down or remove them entirely. Who’s packing back-seat passengers into a Jimny anyway?All fastening material is included.Material:Aluminum, powder-coated blackWeight:6,6 kgMax. load:up to 50 kg
Product number:
ABLATRA-SUJI2
Front winch system Suzuki Jimny GJ/HJ
€1,699.00*
Front winch system Suzuki Jimny GJ/HJ
TÜV certificate for road approval in DE / AT
The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery.
The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex.
Scope of delivery:
Cable winch 2 to
25 m plastic cable
cable harness
complete cable winch control radio remote control (supplied without battery)
cable remote control mounting plate complete with installation material
installation material
installation & operating instructions
TÜV parts certificate.
Product number:
HSW9940JIMIIX
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
€130.00*
Good air circulation like with slightly opened windows and still no higher risk of rainwater or theft penetrating than with closed windows? And protection from various insects?
That is possible: with our ventilation panels with mosquito net. For a subtle appearance, the aluminum sheets, which are supplied in pairs, are powder-coated in black.
No clattering universal parts that "hold" somehow, but custom-made ventilation plates for the Suzuki Jimny 2.
Ideal not only for campers and dog owners, but also to avoid the build-up of heat when parking in the blazing sun. In addition, the super simple assembly: crank down the window, insert the ventilation plate, crank the window up, done!
Please note:At high temperatures, a dog should not belong in a parked car, even with sufficient fresh air!The ventilation plates must not be used while driving!
Material: aluminumSuitable for: Suzuki Jimny 2 (GJ & HJ)
<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Product number:
LBLH-SUJI2
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
€1,990.00*
Variant:
with end support (front and rear)
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs.
The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces.
The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories.
The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety.
The modules are supplied with all the necessary fastening material.
Wind deflector and end carrier are included in the scope of delivery.
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.
Product number:
CGB2-SUJI2-MAUWIND
Modular vehicle panel for Suzuki Jimny 2 type GJ / HJ, for rear side windows, incl. mounting
€119.00*
All packed up for your trip? Of Course! But where is it?
For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time.
The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible.
Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides
Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Product number:
TACV-MFP-SUJI2
Chequer plate supports Suzuki Jimny, type GJ / HJ
€59.00*
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Product number:
1-SUJI2RBS
Lifting suspension TREKFINDER for SUZUKI Jimny II +40-50 mm, type GJ / HJ
From
€1,279.00*
Lifting suspension TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lifting is about 40-50 millimeters.
Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*..
SCOPE OF DELIVERY 1-SUJI2F1:
2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F2:
2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F3:
2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F4:
2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate
Translated with www.DeepL.com/Translator (free version)
Product number:
1-SUJI2F1M
Wheel spacers Suzuki Jimny II, type GJ and HJ
From
€269.00*
Wheel spacer for SUZUKI Jimny II
Suitable for Jimny II type GJ from model 2018 and type HJ
Only the following wheel/tyre combination is listed in the parts certificate:
Wheel spacer from TREKFINDER 44 mm for 2 axles:195/80R15 + 205/75 and 215/75R15
Wheel spacer from TREKFINDER 50 mm for 2 axles:195/80R15 + 205/75 and 215/75R15
Wheel spacers from TREKFINDER 56 mm for 2 axles195/80 + 205/75 and 215/75R15
The Trekfinder 56 mm wheel spacer for 2 axles is available with and without mudguard widening.
Colour: Trekfinder: silver aluminium
Product number:
1-SUJI2SPV56BM
Tailgate Organizer - rear door trim system
From
€100.00*
Tailgate Organizer - tailgate organiser system for various vehicles.
Where to put all those little things in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organiser makes use of the mostly unused space on the tailgate. In several pockets with MOLLE attachment system (abbreviation for MOdular Lightweight Load-carrying Equipment), all kinds of small items can be stowed and are at hand when they are needed.
The advantages of MOLLE Laser-Cut compared to MOLLE with stitching:
lighter in comparison, as much less sewing material is used
quicker to attach and detach e.g. first aid bag
flatter than sewn MOLLE
prevents unintentional snagging
optimum hold and no slipping
What is Molle? Information can be found in the downloads.
The sets are made up as follows:
Land Rover Defender: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate optional: 1x MOLLE first aid bag with Velcro base plate
Suzuki Jimny until year of construction 2018: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 1x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate optional: 1x MOLLE First Aid Bag with Velcro base plate
Suzuki Jimny 2: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 1x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate optional: 1x MOLLE first aid bag with Velcro base plate
Jeep Wrangler JK: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate optional: 1x MOLLE first aid bag with Velcro base plate
Mercedes G until year of construction 2018: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate optional: 1x MOLLE First Aid Bag with Velcro base plate
Universal 650x250 mm: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate 650x250 mm optional: 1x MOLLE first aid bag with Velcro base plate
Universal 740x350 mm: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE Tailgate Organiser base plate 740x350 mm optional: 1x MOLLE first aid bag with Velcro base plate
Material: 100% nylon
And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to rely exclusively on ecologically and health-safe alternatives such as nylon PU when coating textile products.Fastening: For mounting, the cover must be removed, for this our dismantling tool is perfectly suitable, then holes must be drilled, cover put back on and then only screwed on.To ensure the best possible availability of this product, the choice of bags supplied may vary in exceptional cases. If a single bag is not available, it will be replaced by a model of at least the same quality.
Tailgate Organizer custom made:
We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser cut MOLLE panels. Should you require a different design, please enquire via the contact form.
Product number:
NATGO-DEF-BLK-EHTM
Underride protection for SUZUKI Jimny type FJ BJ 1998 to 2018
€199.00*
Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium
Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.
Product number:
1-SUJIUFS
Nakatanenga trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
€17.00*
Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself.
The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose.
As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.
Product number:
KOW-SUJI2
Underride protection TREKFINDER for SUZUKI Jimny II type GJ FRONT AXLE made of 5 mm steel yellow galvanized
€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ front axle
suitable for all Jimny models of the type GJ built from the end of '2018
suitable for all engine and transmission types
suitable for all Vorderachsausführungen
made of 5 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS2K
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
€295.00*
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ transfer case
suitable for all Jimny models of the type GJ built from the end of '2018 and Type HJ
suitable for all engine and transmission types
made of 8 millimeters of aluminum
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS3K
Underride protection TREKFINDER for SUZUKI Jimny 2 Type GJ BJ 2018 and Type HJ
€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized
suitable for all Jimny models of the type GJ built from the end of '2018
suitable for all engine and transmission types
suitable for all rear axle versions
made of 5 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS5K
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
€169.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM
suitable for all Jimny models of the type GJ built from the end of 2018 and Type HJ
suitable for all engine and transmission types
from 3 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
Product number:
1-SUJI2UFS4K
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
€1,219.00*
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
suitable for all Jimny models of the type GJ built from the end of 2018, Typ HJ
suitable for all engine and transmission types
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty versions
Delivery:
underride protection linkage 5 mm anodised aluminum
underrun protection axle tube / differential front axle 5 mm galvanized steel
underride protection transfer case 8 mm aluminum
underride protection exhaust gas control system 3 mm galvanized steel
underrun protection axle tube / differential rear axle 5 mm galvanized steel
Product number:
1-SUJI2UFSKK
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
€79.00*
Door guard set TREKFINDER for SUZUKI Jimny 2 from 10`18, Typ GJ and HJ for the right and left side.
Product number:
1-SUJI2SLT
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
€35.00*
Door handle set TREKFINDER for SUZUKI Jimny II type GJ from 10`18 and type HJ for the right and left side - plastic black.
Product number:
1-SUJI2TST
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
€339.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
please ask us for the current delivery time
Product number:
HIGHPEAK-SUJI2-W
Weight:
10.5 kg
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.
The robust rim is perfect for modern off-road vehicles.
Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.
Also compatible with JB43 (1998-2018) models.
Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).
With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).
Diameter : 16
Width : 6
OFFSET : -5
Bore / PCD : 5x139.7
Finish : black matt, anthracite matt or vintage white
Weight : 9.2kg
Vehicle : Suzuki Jimny 2 GJ/HJ
If you need a complete wheel set, please contact us by e-mail or phone.
info@nakatanenga.de
Tel. : +49 9181 466 644
Documents