Fastening set for AluBoxes on CargoBear 1.0 and 2.0 Probably the easiest and safest way to mount an AluBox on CargoBear 1 or 2: Our customised fastening solution consists of 4 brackets that screw the box base firmly to the roof rack from the inside. This not only serves to secure the box for transport, but also prevents it from being quickly stolen on the road when it is locked. Mounting the brackets is child's play. Apart from the tools, everything you need is included. You can download detailed instructions from our web shop, where you will of course also find a large selection of matching aluminium boxes.  

Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.

Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm

How do you improve the CargoBear? By clicking our rubber covers into fully or partially unused lashing openings in the rack. With our 30 mm wide and 10 cm long strips, you can quickly and securely seal the gaps. The rubber covers give you a whole range of noticeable advantages. Firstly, they improve load safety on the already very slip resistant CargoBear even further. When you position the cargo on top of the rubber strips, the ribbed surface structure prevents the lashed down cargo from sliding. A second effect is created by the rubbers’ added height of 3.5 mm, which lifts the cargo off the actual rack, preventing scratching or damages to both. And last but not least, the covers also prevent vegetation from getting trapped or stuck in the sideways rails when off-roading. The covers sport rounded edges for a better fit. The rubber cover strips for the CargoBear can be ordered in sets of 6 or 24 respectively. One crossbar requires a set of 6 for Defender, Jimny or G-Class. A set of 24 covers one cargo panel with the above-mentioned 4x4s, i.e. the minimum configuration of 2 cross bars and one panel requires 2 sets of 6 and one set of 24. If you have any questions, don’t hesitate to get in touch.

Aluminum cases Pro There are many aluminum cases, but just one “Alubox”. The Wiberg family’s business on Zealand in Denmark has been supplying the Danish military, various rescue services, international expeditions and the off-road community since 1999 with tough, handmade transport cases made from aluminum alloy AW-5754. As you would expect from real Vikings, Danish Aluboxes are seawater resistant. In addition, they can be padlocked, are dust-proof and highly resistant to corrosion and chemicals. The Wibergs’ experience and their commitment to continuously improve the Aluboxes show in the details: extra-robust and impact-proof stacking corners provide tight connections when you put several boxes on top of each other. Spring handles retract, so they’re never sticking out as dangerous obstacles‚ causing damages or injuries. Aluboxes are now made with solid rivets for even greater robustness and durability, even in extreme conditions. The new transport box for the 30-second touring tents by OZtents was developed by Soren Wiberg, who is a big fan of Land Rovers and camping. That’s why he saw right away that the somewhat flimsy OZtent carry bag needs to be improved upon. With packing dimensions of roughly 2 m, OZtents are usually too long to be stowed inside smaller 4x4s. The new Alubox measures 2130 x 510 x 220 mm, making it the ideal storage space for OZtent models RV1, RV2, RV3, RV4 und RV5. The transport case is designed for roof racks, like our very own CargoBear. And if you can fit a tent in your Alubox, you can also fit many other long and unwieldy pieces of equipment: shovels, sand ladders, snow chains and everything else that’s needed on expeditions and camping trips. One more thing: The Wiberg Vikings’ Alubox slogan is “Battered, beaten and still going strong.“  And that’s how we see it, too, when it comes to aluminum cases. Dents, scratches and bruises are at the end of the day part of the deal. They speak of your adventures and that’s why we keep unnecessary and environmentally harmful packaging to a minimum when we are shipping them. Material:Aluminium AW-5754, waterproof / dustproof according to IP54 standard Dimensions:2130 x 510 x 220 mm Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina.  Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!

Defender 110 side storage box When you go on big adventures, every bit of storage space is useful, which means that not a single centimeter should be wasted.Our storage box makes ideal use of dead space. Made entirely of stainless steel and powder-coated in black, the storage box is waterproof, lockable and the ideal container for salvage materials, rubber boots or tools. The box fits perfectly for the sides of the Land Rover Defender 110 (2-door), but also for e.g. a motorhome, long-distance vehicle or other expedition vehicles.The open flap is held at a 90-degree angle by two thin steel cables and thus serves as a storage surface for water canisters, for example, or even as a small breakfast table. Supplied complete with 2 keys and all fixing materials.Internal dimensions of the side storage box: 465 mm x 285 mm x 335 mmPlease note:This side storage box can only be installed in front of the rear wheel arch in hardtop versions.  Merkblatt Edelstahl und Rost

Outdoor Shower Tube with Spiral Hose The dust is settling, the light is fading. The hot Diesel engine is happily ticking away as it’s cooling down and all the chores are done. The awning is up, seats and tables unfolded and even the roof tent is ready. That’s the moment when you realize how sweaty and sticky you are from a long day behind the wheel. A kingdom for a shower, in the middle of nowhere! No worries, we’ve been on the case and this is what we‘ve come up with: A mounted shower unit for overlanders, campers and adventurers. Nakatanenga shower tubes are attached to the side of a CargoBear or any other roof rack. You fill it with the amount of water you need, pressurize the tank with air to guarantee consistent water flow and off you go. During the day, the tube’s black PE material provides free solar off-grid heating for the water, no energy input required, no CO2 emissions. Isn’t that just great at the end of a tough day? The shower tubes come in three sizes – 1,240, 2,100 und 2,750 mm – respectively giving you volumes of 9.4, 17.5 and 23.7 l. We deliver the tubes with CargoBear mounting brackets, tap, handheld shower head and spiral hose pipe. You can attach your own accessories to the ½” connector, of course. The shower tubes is a really neat solution for all your muddy outdoor hobbies, too. How often have you wished you could just quickly hose down clothes, boots, sports equipment or pets before getting into the 4x4 or loading it up? We know. Since the tubes are not equipped with safety valves, we recommend using regular bicycle hand or foot pumps to pressurize them. Manually created pressure will be perfectly sufficient to create a constant flow of water. Brackets for other roof racks than the CargoBear have to be ordered separately. Available in:3 different lengthsWithout holder, with holder for roof rack CargoBear, with holder for other roof racksFor the variants with holders: short includes two holders, medium and long includes three holders Please note:The tube should not be filled to the brim.We recommend a maximum pressure of 2 bar / 29 psiThe tube cannot be attached to a slanted CargoBear extension Some individual parts supplied may differ from the pictures! 

Lock for Alu-Box Pro storage box Secure your Alu-Box with this lock for Alu-Box Pro storage boxes.     keyed alike     is inserted into the existing recess     tool-free assembly

       Model    Volume    Measurements inside    Measurements outside ABP-T010        10 litres               370x200x140 mm                  400x230x156 mm                        ABP-T019 19 litres 500x220x170 mm 530x250x186 mm ABP-S020 20 litres 360x260x180 mm 390x290x200 mm ABP-S023 23 litres 470x350x140 mm 500x380x160 mm ABP-A029 29 litres 360x260x310 mm 390x290x330 mm ABP-A042 42 litres 550x350x220 mm 580x380x240 mm ABP-S060 60 litres 550x350x310 mm 580x380x330 mm ABP-A073 73 litres 550x350x350 mm 580x380x400 mm ABP-S056 56 litres 1220x240x190 mm 1250x270x210 mm ABP-S067 67 litres 550x550x220 mm 580x580x240 mm ABP-S074 74 litres 750x550x180 mm 780x580x200 mm ABP-A081 81 litres 750x350x310 mm 780x380x330 mm ABP-S115 115 litres 550x550x380 mm 580x580x400 mm ABP-S120 120 litres 750x550x280 mm 780x580x300 mm ABP-A134 134 litres 850x450x350 mm 880x480x370 mm ABP-A157 157 litres 750x550x380 mm 780x580x400 mm ABP-S175 175 litres 550x550x580 mm 580x580x600 mm ABP-S163 163 litres 1150x350x380 mm 1180x380x400 mm ABP-S192 192 litres  2100x480x190 mm  2130x510x220 mm ABP-S198 198 litres 1130x720x225 mm 1180x770x260 mm ABP-A240 240 litres 750x550x580 mm 780x580x600 mm ABP-S350 350 litres 1150x750x400 mm 1180x780x420 mm ABP-A415 415 litres 1150x750x480 mm 1180x780x500 mm ABP-S550 550 litres 1150x750x630 mm 1180x780x650 mm ABP-S690 690 litres 1150x750x730 mm 1180x780x750 mm                                           Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina.  Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!