Ähnliche Artikel

Power distributor with fuse holder and earth connection for 6 circuits

Power distributor with fuse holder and earth connection for 6 or 12 circuits

Power distributor with fuse holder and earth connection for 6 or 12 circuits Compact fuse, connection and distribution box for up to six or twelve separately fused circuits with a load capacity of up to 30 amps per consumer and voltages of up to 32 volts. This makes the holder suitable for a wide range of vehicles, from classic cars with 6 V electrical systems to trucks with 24 V electrical systems.The fuse box also serves as a distribution or collection system for the earth connection. Difficult-to-locate electrical and electronic problems due to a bad earth wire of the bodywork are thus significantly minimised - especially for Land Rover Defender models from model year 2007 onwards (Td4 engine) this is a good investment! A ground cable is then fed back to the battery from the ground collection point.The distributor is the cornerstone of a neatly constructed and fused electrical system in the vehicle and should be fitted right at the start of Defender ownership if possible. The distributor itself must also be fused - no more than 30 cm from the battery, with max. 125 A - for this we recommend the fuse holder up to 200 A as well as the matching 125 A MIDI strip fuses.Another feature is an LED indicator for each circuit, which indicates a defective fuse when it lights up. The scope of delivery also includes stickers for various consumers to make it easier to assign the respective connections. Scope of delivery:- Fuse holder for optionally up to 6 or 12 circuits.- Clear plastic cover with inset labelling fields- Delivery without fuses

Product number: SVFB-6M

Weight: 0,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €39.00*

Select version

BlueSea fuse holder with cover, for 8 flat fuses

BlueSea fuse holder with cover, for 8 flat fuses The fuse holder with cover accommodates 8 fuses in a compact space and serves as a power distributor for setting up up to 8 circuits. Commercially available ATC flat fuses can be used.It is suitable for 12 V and 2 4 V vehicle electric systems and may be loaded with up to 30 A per circuit and 100 A in total at the same time.Delivery without further accessories, if shown, these are for illustration purposes only.

Product number: NABS5046

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€74.00*

BlueSea Fuse Block and Power Distribution

Compact size BlueSea blade fuse block and power distribution for either six or up to twelve seperately fused circuits for up to 30 Amps per electronic installation and currencies up to 32 volts. Fitting a variety of cars with 6 V up to 24 V supply systems. These fuse boxes also provide a common negative bus to minimize bad earth problems. New version offers two separate circuits, thus allowing e.g. 6 installation with permanent life feed and 6 with ignition life feed. This fuse box can be the starting point for well laid-out and safe vehicle electrics and should be fitted from early on when starting fitting additional appliances and electical installations. The box itself should be fused - not more than 30 cm away from the battery with a maximum of 125 A - for which we recommend our fuse carrier (up to 200 A) from the same supplier with the suitable 125 A MIDI strip fuse. Comes with: fuse box for either 6 or 12 circuits clear plastic cover with recessed placeholder for lables two slots for spare blade fuses no fuses supplied Technical details: Modell SHMA-6 SHMA-12 SHMA-6+6 number of circuits max. 6 max. 12 max. 6+6 placeholder for spare fuses 2 2 2 dimensions 125x85x39 mm 165x85x39 mm 165x85x39 mm weight 250 Gramm 350 Gramm 350 Gramm max. per circuit max. 30 A max. 30 A max. 30 A max. overall max. 100 A max. 100 A max. 100 A max. voltage max. 32 V max. 32 V max. 32 V Please choose number of circuits.

Product number: NABS5025M

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €64.00*

Select version

BlueSea fuse holder for 6 independent circuits

High-quality fuse holder for 6 independent circuits, incl. transparent cover with labelling fields and holder for a spare fuse. The individual circuits can each carry a load of up to 30 A. The fuse holder is designed for up to 32 volts and can be used for 12-volt and 24-volt electrical systems.

Product number: NABS5035

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€64.00*

Das könnte Sie auch interessieren

Switch Labels for Nakatanenga and CarlingTech Switches

98 labels on one sheet, laminatedsymbols/lettering black, transparent background The individual labels have been designed to allow for easy change of the Carling switch labelling. THey are printed on high-quality transparent film and then laminated to guarantee longevity even under the most severy off-road conditions. Because of the black pictograph the illuminated space is larger than when having transparent icons. This means that both, the typical Defender-green switch illumination as well as the orange switched-on light are highly visible.If used with Carlingtech switches, the labels have to be trimmed.

Product number: SWNAKAKZ

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€12.00*

Carling Contura switch for cable winch, with mechanical protection

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

Product number: SWCAWNCHL

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€29.00*

Carling Contura Switch, OFF/ON/ON

Carling Contura switch, OFF/ON/ON The green illumination of the switches matches the typical defender cockpit lighting, the orange switch status indicator is particularly easy to recognise. This colour coding of the switch statuses is manufactured especially for us by MUD, UK, and is not available in this form from MUD.

Product number: SWCAMOFONON

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€22.00*

Carling Indicator light

Indicator light with 2 LEDs, controlled separately, available in a variety of colors, compatible with the Carling mounting frame and labeling, 6.3 mm connectors. Using the mounting frame the light switches also fit into the DIN slot underneath the glove box of the Td4, into the console between the vents or into the console on the roof. --select color--

Product number: CTWL-RRM

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €19.00*

Select version

Carling Contura Switch Mount for Carling and Nakatanenga Switches

These mounts are used to properly mount switches measuring 21x37 mm (e.g. switches by Nakatanenga, Carlingtech or ARB). They are stackable, that means you can group 1 to X switches - that's why there are mounts either for mid-section or end-section. End sections are the same for either side. We also offer ready-made mounts for 1 or 3 and 6 gang, as well as switch blanks to blank of unused mounting holes. Please choose.

Product number: CTMF-ENDM

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €4.00*

Select version

BlueSea fuse holder with cover, for 4 flat fuses

Name: BlueSea fuse holder with cover, for 4 flat fuses
Brand: BlueSea
SKU: NABS5045
Price: 46.0 EUR
Availability: InStock

€46.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ compact fuse holder with cover ✔️ for 4 fuses ✔️ power distributor for up to 4 circuits ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Piece

Product number: NABS5045

Weight: 0.1 kg

BlueSea fuse holder with cover, for 4 flat fuses

The fuse holder with cover accommodates 4 fuses in a compact space and serves as a power distributor for setting up up to 4 circuits. Commercially available ATC flat fuses can be used.

It is suitable for 12 V and 24 V vehicle electric systems and may be loaded with up to 30 A per circuit and 100 A in total at the same time.

Delivery without further accessories, if shown, these are for illustration purposes only.