Das könnte Sie auch interessieren
CargoBear accessory holder for maximum traction
€89.00*
CargoBear accessory holder for maximum traction
Maximum Traction Boards are an extremely lightweight plastic alternative to conventional aluminum sandboards, a must-have for all serious off-roaders and expedition enthusiasts. If you have at least two CargoBear crossbars - or the entire roof rack - on the classic Defender (up to MY2016) or Mercedes G-Class, you can now install a robust and quickly accessible mount for the traction boards with little effort.
The mount consists of a bracket set with two of our tried-and-tested CargoBear awning brackets (stainless steel) and special aluminium mounting plates for the traction boards. The awning brackets are simply screwed to the crossbars’ angled sides.
All brackets are powder-coated in black. Screws and fastening material (stainless steel) - also for the traction board - are included.
Product number:
CGB2-AMK-ZUBHALT-MT
Vision-X Cannon Race CR-3S, 36 watt
From
€220.00*
Cannon Race CR-3S - 36 Watt - MULTI LED FOR MAXIMUM LIGHT OUTPUT
High-Output LEDs with 4,200 Raw Lumens Per Pair
Maximum Distance Spot Beam Reach 582m. (Pair)
Clear and Selective Yellow Lens Options
Compact Housing Design
The Cannon Race Series 3 LED driving lights (CR-3) delivers the highest performing 36-watt compact driving light to hit the market. The CR-3 features a unique beam system which allows you to swap between an ultimate distance spot lens or a wider street-legal hybrid lens to fit your application.The CR-3 driving lights are available in 2 beam patterns in clear or yellow lens option that can be outfitted with whatever lens best suits your occasion.The Spot Beam lens was designed to provide the max amount of distance out of a light this size. We accomplished just that with our spot beam lens reaching out to a massive 582m. (Pair).Looking for more width vs distance out of your lights? Our Hybrid lens will do the job and not only exceed your expectations off-road but on-road as well. SAE/DOT & ECE certified, our hybrid lens can be utilized as a street-legal high beam that will make your headlights feel like they are not even on.
Features:
LEDs: 3 x 12W
Housing Material: Aluminum
Light Colour Temp: 5600 Kelvin
Dimensions: 90/95/67mm
Weight: 0.62 kg
Voltage: 9-32V DC
Amperage: 1.5A@24V DC - 3@12V DC
Vibration Rating: 21.2 Grms
Lens Material: Polycarbonate
Certifications: CE, RoHS, ECE R112
Weatherproof Deutsch Connector
Product number:
NACR-3SM
Montagepauschale für Systemdachträger CargoBear
€99.00*
Montagepauschale für die Nakatanenga CargoBear in unserem Hause.
Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer.
Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben.
Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Product number:
MONCGB
CargoBear - crossbar - for Mercedes G
From
€404.00*
CargoBear - crossbar - for Mercedes G
Who does not need an entire roof rack on his Mercedes G because he e.g. If you only want to install a roof tent on two crossbars, the CargoBear cross bars are ideal for that! They are structurally identical to the crossbars of the CargoBear Mercedes G roof racks and therefore also offer their advantages:
made of a light and stable aluminum-magnesium alloy (AlMg3)
high quality powder-coated (RAL 9005 - jet black)
width: 1.505 mm (thereof 1.350 mm for the usable area)
length: 120 mm
completely made in Germany
Since our CargoBear roof racks are modular system racks, you can upgrade two or three brackets to the full roof rack by purchasing the missing parts!
Of course, numerous accessories can also be used for the CargoBear roof rack with the crossbars.
Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm
Measured from the gutter, the CargoBear is approx. 20cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Suitable for all CargoBear 1 + 2 roof racks!
Product number:
CARGOBEAR-G-LB1M
Ähnliche Artikel
CargoBear Wind Deflector for Defender-CargoBear - SLIDE
€130.00*
Wind deflector - suitable for CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element
Material:
Aluminium, black matt powder-coated RAL 9005
incl. fixing material
the wind deflector extends the CargoBear by 10 cm.
lightbars or headlights can be mounted on the wind deflector.
suitable for all CargoBear 1 + 2 roof racks!
Please note: When using a snorkel, the wind deflector may need to be adjusted.
Product number:
CGB2-DEF-WINDSCHRAEG
CargoBear closure carrier Defender until MY2016
€146.00*
CargoBear end plate Defender
Beautiful and handy, this CargoBear end plate for the Defender. Beautiful because it adds the finishing touch to the design of the already extremely attractive black bear. Particularly on the short Landy, with the roof rack configuration of three crossbars and two perforated board surfaces, the wind deflector and end panel round off the look perfectly on both sides and, above all, provide the ideal roof rack length for the vehicle. And then, as already mentioned, the end panel is also very handy because we have integrated a handle on both sides, which makes climbing up to the roof level much easier and safer.
The end module also extends the usable loading area by another 9 cm and offers additional space for attaching work LEDs, fastenings, lashing points and the like. Above all, however, it can protect the rear edge of the roof when loading and unloading the bear - depending on the CargoBear configuration and vehicle. As always in our modular CargoBear system, the material is a black, powder-coated aluminum-magnesium alloy with a non-slip perforated plate structure.
The end plate is supplied with all the necessary fastening material.
Material: Aluminum-magnesium alloy (AlMg3), high-quality powder-coated
Color: Deep black RAL 9005
Width: 1,450 mm
Suitable for all CargoBear 1 + 2 roof racks.
Product number:
CGB2-DEF-ABSCHLUTR
Mounting kit for all CargoBear system roof racks
€35.00*
The stainless steel mounting kit
Is for mounting various brackets on the CargoBear system roof rack or on the Cargobear crossbar - e.g. the CargoBear quick mounting frame is attached with this mounting kit (the mounting kit is already included with the quick mounting frame).
The kit consists of 4 stainless steel sliding blocks with matching M8 stainless steel screws. The long screw makes installation easier, as the sliding block can be easily positioned with it (see 2nd and 3rd picture).
Dimensions of a sliding block:
Length: 65 mm
Width: 18.5 mm
Height: 6 mm
Material:
Stainless steel
Please note:
The CargoBear can generally be fitted to a vehicle with a lifting roof/camping roof, but a few things must be taken into account.
Please contact us for more information.
Suitable for all CargoBear 1 + 2 roof racks!
Product number:
CARGOBEAR-NUTKIT
CargoBear - Crossbar - for Land Rover Defender
From
€409.00*
Who does not need an entire roof rack on his Land Rover Defender, because just want to mount a roof tent on two cross-beams, for which the CargoBear crossbars are optimally suited! They are identical to the crossbars of the CargoBear roof rack and therefore combine all their advantages:
made of a light and stable aluminum-magnesium alloy (AlMg3)
high quality powder coated (RAL 9005 - deep black)
width: 1.450 mm (of which 1.300 mm for the usable area)
length: 120 mm
completely made in Germany
Furthermore, two or three brackets can be upgraded by buying the missing parts to a full CargoBear roof rack - this is just the advantage of the modular system carrier!
Of course, numerous accessories for the CargoBear roof rack with the crossbars can be used.
Please note:
The CargoBear roof rack / crossbar can not be installed on defenders that have a ribbed roof (see photo). An approximate indication of the series is between 1983 and 1989.
Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm
Measured from the gutter, the Cargobear is approx. 23 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Product number:
CARGOBEAR-DEF-LB1M
CargoBear bracket for large auxiliary headlights
€20.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
CARGOBEAR-ZS-L
Weight:
0.2 kg
Bracket for large auxiliary headlights
For driving lamps and Vision-X Cannon, stainless steel, black powder-coated.
Delivery without headlights, price per piece.
- Suitable for all CargoBear 1 + 2 roof racks!
Documents