Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Land Rover Defender u. Discovery Back
Zur Händlerkarte

Ähnliche Artikel

Cargobear crossbar
CargoBear - Crossbar sloping/low - for Land Rover Defender
CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector  Material:  Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights
Product number: CARGOBEAR-DEF-LBS
Weight: 5,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€399.00*
CargoBear end plate Defender
CargoBear closure carrier Defender until MY2016
CargoBear end plate Defender Beautiful and handy, this CargoBear end plate for the Defender. Beautiful because it adds the finishing touch to the design of the already extremely attractive black bear. Particularly on the short Landy, with the roof rack configuration of three crossbars and two perforated board surfaces, the wind deflector and end panel round off the look perfectly on both sides and, above all, provide the ideal roof rack length for the vehicle. And then, as already mentioned, the end panel is also very handy because we have integrated a handle on both sides, which makes climbing up to the roof level much easier and safer. The end module also extends the usable loading area by another 9 cm and offers additional space for attaching work LEDs, fastenings, lashing points and the like. Above all, however, it can protect the rear edge of the roof when loading and unloading the bear - depending on the CargoBear configuration and vehicle. As always in our modular CargoBear system, the material is a black, powder-coated aluminum-magnesium alloy with a non-slip perforated plate structure. The end plate is supplied with all the necessary fastening material. Material: Aluminum-magnesium alloy (AlMg3), high-quality powder-coated Color: Deep black RAL 9005 Width: 1,450 mm Suitable for all CargoBear 1 + 2 roof racks.    
Product number: CGB2-DEF-ABSCHLUTR
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€146.00*
CargoBear Mounting Kit
Mounting kit for all CargoBear system roof racks
The stainless steel mounting kit Is for mounting various brackets on the CargoBear system roof rack or on the Cargobear crossbar - e.g. the CargoBear quick mounting frame is attached with this mounting kit (the mounting kit is already included with the quick mounting frame). The kit consists of 4 stainless steel sliding blocks with matching M8 stainless steel screws. The long screw makes installation easier, as the sliding block can be easily positioned with it (see 2nd and 3rd picture). Dimensions of a sliding block: Length: 65 mm Width: 18.5 mm Height: 6 mm Material:  Stainless steel Please note: The CargoBear can generally be fitted to a vehicle with a lifting roof/camping roof, but a few things must be taken into account. Please contact us for more information. Suitable for all CargoBear 1 + 2 roof racks!      
Product number: CARGOBEAR-NUTKIT
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€35.00*
CargoBear - Crossbar - for Land Rover Defender
CargoBear - Crossbar - for Land Rover Defender
Who does not need an entire roof rack on his Land Rover Defender, because just want to mount a roof tent on two cross-beams, for which the CargoBear crossbars are optimally suited! They are identical to the crossbars of the CargoBear roof rack and therefore combine all their advantages: made of a light and stable aluminum-magnesium alloy (AlMg3) high quality powder coated (RAL 9005 - deep black) width: 1.450 mm (of which 1.300 mm for the usable area) length: 120 mm completely made in Germany Furthermore, two or three brackets can be upgraded by buying the missing parts to a full CargoBear roof rack - this is just the advantage of the modular system carrier! Of course, numerous accessories for the CargoBear roof rack with the crossbars can be used. Please note: The CargoBear roof rack / crossbar can not be installed on defenders that have a ribbed roof (see photo). An approximate indication of the series is between 1983 and 1989. Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm Measured from the gutter, the Cargobear is approx. 23 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Product number: CARGOBEAR-DEF-LB1M
Weight: 6,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €409.00*
Select version

Das könnte Sie auch interessieren

Connecting piece for headlamp holder
CargoBear connector for headlight holder
Connecting piece for headlamp holder Can be used laterally or centrally (see technical drawings). Suitable for universal accessories such as light bars.Supplied without side brackets, which are necessary for mounting, and without headlights.The mounting points of a light bar can be up to 400 mm apart in order to be attached to the connector.ATTENTION: The article only fits the CargoBear Defender 1 + 2!
Product number: CARGOBEAR-ZS-BRI
Weight: 0,2 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€23.00*
Drawing, 1 Crossbar CargoBear Mercedes G
CargoBear - crossbar - for Mercedes G
CargoBear - crossbar - for Mercedes G Who does not need an entire roof rack on his Mercedes G because he e.g. If you only want to install a roof tent on two crossbars, the CargoBear cross bars are ideal for that! They are structurally identical to the crossbars of the CargoBear Mercedes G roof racks and therefore also offer their advantages: made of a light and stable aluminum-magnesium alloy (AlMg3) high quality powder-coated (RAL 9005 - jet black) width: 1.505 mm (thereof 1.350 mm for the usable area) length: 120 mm completely made in Germany Since our CargoBear roof racks are modular system racks, you can upgrade two or three brackets to the full roof rack by purchasing the missing parts! Of course, numerous accessories can also be used for the CargoBear roof rack with the crossbars. Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm Measured from the gutter, the CargoBear is approx. 20cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all CargoBear 1 + 2 roof racks!
Product number: CARGOBEAR-G-LB1M
Weight: 6,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €404.00*
Select version
Cargobear crossbar
CargoBear - Crossbar sloping/low - for Land Rover Defender
CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector  Material:  Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights
Product number: CARGOBEAR-DEF-LBS
Weight: 5,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€399.00*
Montagepauschale für Systemdachträger CargoBear
Montagepauschale für Systemdachträger CargoBear
Montagepauschale für die Nakatanenga CargoBear in unserem Hause.  Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Product number: MONCGB
Weight: 0,0 kg
no shipping possible!
Available from stock - delivery time 1-3 working days

€99.00*
CargoBear additional holder black
CargoBear accessory holder for maximum traction
CargoBear accessory holder for maximum traction Maximum Traction Boards are an extremely lightweight plastic alternative to conventional aluminum sandboards, a must-have for all serious off-roaders and expedition enthusiasts. If you have at least two CargoBear crossbars - or the entire roof rack - on the classic Defender (up to MY2016) or Mercedes G-Class, you can now install a robust and quickly accessible mount for the traction boards with little effort. The mount consists of a bracket set with two of our tried-and-tested CargoBear awning brackets (stainless steel) and special aluminium mounting plates for the traction boards. The awning brackets are simply screwed to the crossbars’ angled sides. All brackets are powder-coated in black. Screws and fastening material (stainless steel) - also for the traction board - are included.
Product number: CGB2-AMK-ZUBHALT-MT
Weight: 3,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€89.00*

CargoBear connector for headlight holder

Connecting piece for headlamp holder
Detailed view of connecting piece for headlamp holder
Drawing, possible positions of the connector
Application example, drawing
Connecting piece, installed on the CargoBear
Example of use with Lightbar
Lightbar attached to CargoBear with connector for headlights
Drawing, detail of connecting piece for headlamp holder
Connecting piece for headlamp holder
Detailed view of connecting piece for headlamp holder
Drawing, possible positions of the connector
Application example, drawing
Connecting piece, installed on the CargoBear
Example of use with Lightbar
Lightbar attached to CargoBear with connector for headlights
Drawing, detail of connecting piece for headlamp holder

€23.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

️ ↪️ CargoBear roof rack headlight holder ✔️ connector ✔️ rustproof ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Piece
Product number: CARGOBEAR-ZS-BRI
Weight: 0.2 kg

Connecting piece for headlamp holder


Can be used laterally or centrally (see technical drawings). Suitable for universal accessories such as light bars.

Supplied without side brackets, which are necessary for mounting, and without headlights.

The mounting points of a light bar can be up to 400 mm apart in order to be attached to the connector.

ATTENTION:
The article only fits the CargoBear Defender 1 + 2!

Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...