Single Stud Fitting For airline cargo lashing rails, load capacity 300 kg, ring diameter 40 mm, manufactured according to ISO 9788, anodised aluminium, UV and salt water resistant. This single stud also fits our Cargobear. Please note: Depending on availability, the Single Stud is delivered in blue or grey.

Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm

Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16 The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).   Diameter : 16Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644

Checker plate supports rear TREKFINDER for SUZUKI Jimny II from MY 2018 for the rear bumper corners on the right & left side. Scope of delivery: 2 pieces aluminium chequer incl. stainless steel screws. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer (quintet plate)  

Roof console for Suzuki Jimny 2, type GJ On our passionate mission to optimize the storage space in the Suzuki Jimny II in the best possible way, we have set our sights on one of the last remaining spaces in the interior. Having covered the rear area well with the CargoBear shelf, cargo net, tailgate organizer, seat covers and modular window panels, we are left with an empty piece of headliner between the driver and front passenger that is crying out for a storage upgrade. Our roof console made of 2 mm thick aluminum is approx. 73 cm long and 18 cm wide, making it ideal for strapping or screwing on flat and/or long items of equipment, MOLLE bags and the like. Mounting the bracket is extremely simple, regardless of whether a cargo net is already installed or not. In the former case, the retaining plate of the console is attached directly to the strip of the cargo net. If the headlining is still bare, there are two plugged mounting points at the corresponding points at the factory which are used. At the front, the interior light must be removed briefly in order to make two small holes in the trim for the screws. Once the screws have been secured with the nuts, the interior lighting can be refitted.  The roof console for the Jimny 2 is available in black, coyote or gray to match the roof net versions.    

Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task. For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.

Quick Fist micro tool holder Can accommodate objects 15-22 mm in diameter. Each holder has a reliable load capacity of 6 kg. Ideal for thin handles such as flashlights, tools, fishing rods and much more. Tested according to AfPS GS 2014: 01 PAK: suitable for long-term skin contact Simple assembly with a screw that is attached in the middle Scope of delivery: 4 pieces Quick Fist Micro Tool Holder

Quick Fist tool fixing set containing eight Quick Fist clamps (2x Quick Fist Mini-I, 4x Quick Fist Standard, 2x Quick Fist Super) - save about 10% Please also visit our Quickfist - produkt page and find out about different uses for these clever clamps.

Quickfist Go-Between tool holder Quick Fist Go-Between, pack of 1, clamping range 45 to 73 mm, max. 16 kg per holder Visit our Quickfist product page to see more practical application examples of these ingenious holders.

Quickfist tool holder XL Quick Fist XL, pack of 2, clamping range round up to 381 mm or 762 mm circumference, max. 68 kg per holder Visit our Quickfist product page to see more practical application examples of these ingenious holders.  

Saving Bundle! Here you get the perfect set for your load securing! Simply add additional attachment points to your vehicle.The lashing points and single studs are flexible and therefore always in the right place!Fast and safe installation. One bundle consists of:6 pieces lashing points (diameter 45 mm, thickness 10.3 mm)6 pieces Single Stud (load 300 kg, ring diameter 40 mm, anodized aluminum, UV and salt water resistant) 5 sets (30 pieces lashing points + 30 pieces single studs) cost only 100€! Only while supplies last!* Compared to single purchase

Practical and high-quality tensioning and fastening belt set for many different applications. The set is not only suitable for tensing or fastening of many things, but can also be used ideally together with our Tailgate Organizer. The 25mm width is perfect for all Molle loops. Thus, for example, Fix jackets, blankets and much more simply, quickly and comfortably. The set consists of:2 straps with 50 cm2 straps with 75 cm2 straps with 125 cm The straps are all 25 mm wide. Material: 100% nylon blackBuckles: Duraflex

Tailgate Organizer - tailgate organiser system for various vehicles. Where to put all those little things in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organiser makes use of the mostly unused space on the tailgate. In several pockets with MOLLE attachment system (abbreviation for MOdular Lightweight Load-carrying Equipment), all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Laser-Cut compared to MOLLE with stitching: lighter in comparison, as much less sewing material is used quicker to attach and detach e.g. first aid bag flatter than sewn MOLLE  prevents unintentional snagging optimum hold and no slipping What is Molle? Information can be found in the downloads. The sets are made up as follows: Land Rover Defender:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny until year of construction 2018:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Suzuki Jimny 2:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Jeep Wrangler JK:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Mercedes G until year of construction 2018:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Universal 650x250 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 650x250 mm    optional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 740x350 mm    optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to rely exclusively on ecologically and health-safe alternatives such as nylon PU when coating textile products.Fastening: For mounting, the cover must be removed, for this our dismantling tool is perfectly suitable, then holes must be drilled, cover put back on and then only screwed on.To ensure the best possible availability of this product, the choice of bags supplied may vary in exceptional cases. If a single bag is not available, it will be replaced by a model of at least the same quality. Tailgate Organizer custom made:     We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser cut MOLLE panels. Should you require a different design, please enquire via the contact form.