Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winchWinch cover Roller rope window cover

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997

Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winchWinch cover Roller rope window cover

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997

Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winchWinch cover Roller rope window cover

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997