Connection cable for Planar control unit, 7 meters

Control element for Planar Autoterm air parking heater 12V 2D and 4D Comfort is when you don’t have to worry about life’s basics and feeling warm and cozy is definitely one of them, especially when camping, on a weekend trip or a 4x4 adventure. And since there is always too much on everyone’s to do list anyway, it’s a great relief when there’s at least one job you never have to worry about before you hit the sleeping bag or your bunk. That’s where the Comfort Control remote for Autoterm/Planar Diesel air heaters 2D and 4D comes in. Completely redesigned and greatly improved when compared to its predecessor, the Comfort Control activates and deactivates your heater based on timer and/or thermostat settings. Choose from three timer modes for recurring heating intervals, a power mode for constant output, ventilation-only modes e.g. for reducing air humidity inside your camper and last but not least the new thermostat mode. The latter was added due to popular request and allows for setting and maintaining comfortable temperatures by individual degrees centigrade. No more nights in the camper when it’s constantly either too cold or too hot. The new design is also much more comfortable and ergonomic. The OLED display, the multifunctional, non-slip rotary dial as well as two push buttons make selecting and setting the desired functions really easy. Navigating the menus is intuitive and straightforward and basic functions can be accessed directly with a shortcut button. Despite a bigger display and more functions, the  Comfort Control is actually smaller in size than its predecessor. With dimension of only 82 x 37 x 19 mm, you can hide it easily but you don’t have to because the new design is a lot more stylish and will make a nice feature in any camper. Concern for space is one thing in camping mobiles, the usage of electricity is another. In that respect, the remote control has also improved by minimizing its own power consumption. Moreover, the Comfort Control is capable of monitoring the voltage, effectively eliminating the danger of the heater deep discharging the battery. Another great feature is an alert function reminding you when to burn off soot deposits in the combustion chamber. Connecting the Comfort Control remote is as easy as plug & play.

Autoterm Push Control S and L The Autoterm Push Control is a compact and easy-to-use switch for controlling Autoterm parking heaters. It enables different operating modes and functions depending on the heater. It also fulfils a long-held customer wish to be able to connect two control units to one heater - so the heater can be started conveniently from the driver's cab, for example, while the standard control unit is installed in the living area. NEW: The Autoterm Push Control enables simple control of air and water level heaters and, for the first time, the option of connecting two control panels to one heater! FunctionsOperating modes for air heatersPower mode (standard mode): With a single or multiple click, you can choose between five fixed power levels. The colour of the LED ring indicates which power level the heater is currently inTemperature mode: In conjunction with an external temperature sensor, a temperature of 18, 21 or 25 degrees can be achieved and maintained. "Maximum power" can also be set as the highest level in temperature mode. Operating modes for water level heatersPreheating mode: The heater runs until a certain coolant temperature is reached, then switches off the burner and restarts when the temperature drops. Here you can choose between a heating time limited to two hours or continuous operation. Simple installationThe Push Control comes in a plug-and-play design with an included control module and connection cable for quick and easy integration. Dual controlfinally possible: The Push Control can be used as the sole control element for your heating system or combined with the Autoterm Comfort Control control panel to enable dual control for a single heating system. This makes it easy to operate your parking heater in different areas of the vehicle and ensures maximum user comfort. Robust and waterproofStainless steel housing with IP67 protection class, making the switch waterproof and safe and durable even under extreme conditions. CompatibilitySuitable for Autoterm Air heaters (2D, 4D, 8D, 9D) and Autoterm Flow heaters (5D, 5B, 14D). Available in two versions:Variant S: 6 mm thread with Molex plugVariant L: 12 mm thread with round plugDimensions for both switches:Diameter of the button surface 25 mm each.Thread diameter 22 mm each.  

The temperature sensor / probe enables a more accurate measurement of the temperature. This temperature sensor can be mounted as a third sensor (in addition to the two temperature sensors built into the heating and control panel); for example, in the living or sleeping area. The cable is 5 m long and protected by a corrugated tube. Suitable for AUTOTERM Luft 2D / 4D (formerly Planar 2D, 4D and 44D) parking heaters. Note: 1 temperature sensor can be connected per heater.

Module for 12 Volt AUTOTERM parking heaters With this module and a suitable radio remote control, you can control AUTOTERM (Planar 2D12 and Planar 44D12) parking heaters. You need the module to assign the parking heater to a channel of a radio remote control. You can thus switch the parking heater on and off by remote control. A connection diagram is included in the scope of delivery.

Air vents for individual warm air regulation This vent can be used for all independent vehicle heaters with 60 mm piping, like the Planar 2D auxiliary heater. The vent can not be fitted to our auxiliary heater center console, in which case please use our Webasto vent.

Webasto pipe connector / double socket, with 60 mm connection Warm air pipe connector for effective distribution of warm air. The warm air pipe connector can be used to connect two warm air pipes with each other. Diameter: Ø 60 mmPrice per piece

Heater piping / flexible piping / air pipe for efficient distribution of heater air. The piping is specially tailored to suit the Planar 2D auxiliary vehicle heater, but also fits Webasto, Eberspächer and Truma heaters. Supplied according to stock, i.e. you can reveive either black or brown. colour: silver inner with either black or brown outerdiameter: Ø 60 mmprice per metre, only sold in full metre lenths