Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

CargoBear cross bars  There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.

Alloy wheel Dezent TV black for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black rim is ideal for off-roaders, vans and SUVs.The all-rounder has a particularly balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) protects in winter conditions as well as in everyday or work use.    Diameter : 20    Width : 9    OFFSET : 43    Bolt circle / PCD : 5/120    Finish : Glossy black (3-coat paint)    Weight : 16,5kg    incl. parts certificateAlso available as complete wheel sets with different tyres: Radar Renegade or BF Goodrich All Terrain KO2

Complete wheel set for Land Rover New Defender - Radar Renegade R/T+ on aluminum rim Dezent TV Black Available as set of 4 or 5 complete wheels.   Alloy wheel Dezent TV black for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use.       Diameter : 20     Width : 9     OFFSET : 43     Bolt circle / PCD : 5/120     Surface : glossy black (3-layer paint)     incl. parts certificate Summer tires Radar Renegade R/T+ 275/55R20 120Q P.O.R. The Renegade R/T+ is the new Rugged Terrain tire range in the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance with on-road comfort and refinement. On the road, this tire offers the driver superior handling with a smooth and steady ride, while off-road it has the necessary handling of an MT tire. The Renegade R/T+ offers both an aggressive and rugged look with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds.       Vehicle type: SUV     Wet grip: B     Noise emission: 75 dB     Load index: 121/117 (load capacity: 1,450 kg)     Speed index: Q (160 km/h)     Use: Summer     Off-road: yes Features: Computer-optimized tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust, 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, central tread blocks help balance the weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from digging into the tread and becoming lodged there.   The price refers to 4 or 5 complete wheels including fitting and balancing. This item is bulky goods.    

Complete wheel set BF Goodrich All Terrain T/A KO2 275/55R20 115S on Dezent TV black 9x20” ET43 for New Defender Available as a set of 4 or 5 complete wheels.   Dezent TV black alloy wheel for New Defender MY 2020 With load capacities of up to 1050 kg per wheel, the Dezent TV black wheel is ideal for off-roaders, vans and SUVs. The all-rounder has a particularly well-balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) provides protection in winter conditions as well as for everyday or work use.     Diameter : 20     Width : 9     OFFSET : 43     Bolt circle / PCD : 5/120     Surface : glossy black (3-layer paint)     incl. parts certificate Tires BF Goodrich All-Terrain T/A KO2 275/55R20 115S BF Goodrich tires meet the expectations of passionate drivers. With BF Goodrich tires, you can easily overcome obstacles and master challenges with ease. This brand is perfect for all road surfaces and weather conditions. BF Goodrich tires offer you good grip and control of the vehicle both on and off-road.   Tire model: ALL TERRAIN T/A KO2 Tire width: 275 Tire cross-section: 55 Tire diameter: 20 Load index: 115 Speed index: S Fuel efficiency: F Wet grip: B Volume: 75 3PMSF: Yes The price refers to 4 or 5 complete wheels incl. fitting and balancing. This article is bulky goods.

Twin-Monotube-Project AT alloy wheel 20 9x20" ET40 for New Defender For the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts certificate especially for new Defender, suitable for orig. 20 inch factory AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted as mentioned in the certificate. Furthermore optimum offsets to avoid grinding contact on brakes or wheel arch/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra.     Twin Monotube Project-AT20 Rim, 9x20", concave     for front and rear     Offset 40 5x120/72.6     Wheel connection M14x1.5 tapered 60 degrees     Wheel load: 1000 kg     For tyres: 20 inch Series new Defender     Suitable for winter use: Yes     incl. parts certificate and wheel nuts Also available as complete wheel sets with different tyres:Radar Renegade or BF Goodrich All Terrain KO2.

Complete wheel set BF Goodrich All Terrain T/A KO2 on twin monotube project AT 9x20’ ET40 for New Defender Complete wheel set BF Goodrich All Terrain T/A KO2 on twin monotube project AT 9x20’ ET40 for New Defender Available as a complete wheel set of 4 or 5 in various tyre sizes. Aluminium wheel mono twin project AT For the Landrover New Defender as an authentic NO FAKE all-terrain rim that is second to none. This means, in addition to the genuine interchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts certificates especially for New Defender, suitable for original 20 inch factory AT series tyres. New Defender models with standard brakes do not require any additional parts, only models with large brakes (Brembo) must be fitted with track plates as specified in the report. Furthermore, optimum offsets to avoid grinding contact on the brakes or wheel arch/bodywork and to avoid any reworking in this respect and to offer a perfect look and function even without spacers. The rims are available in the colours satin black or terra. Twin Monotube Projekt-AT20 9x20’ aluminium rim, concave     for front and rear     ET40 5x120/72.6     Wheel connection M14x1.5 tapered collar 60 degrees     Wheel load: 1000 kg     For tyres: 20 inch series New Defender     Suitable for winter: Yes     incl. parts certificate and wheel nuts BF Goodrich All-Terrain T/A KO2 tyres The BF Goodrich All Terrain tyres are true off-road all-rounders and can be reliably controlled on any surface (on-road as well as off-road). The tyres are suitable for use all year round, whether summer or winter, and are therefore also M+S marked. Technical data Rolling resistance: F Wet grip: B Noise emission: 74-75 dB M+S labelling: yes Snowflake symbol: yes The tyre is suitable and permitted for winter use. Excellent propulsion on any terrain Wide notches on the shoulders Tread extension into the sidewall Exceptional resistance and durability (Trigard carcass)  Deep, aggressive tread  with high sipe density Compared to its predecessor (All Terrain KO), the BF Goodrich All Terrain KO2 offers     a 20% more resistant tyre sidewall     more composure even under extreme conditions     a longer tyre life on any surface     2x longer service life on gravel     15% longer life on tarmac     10% more traction on mud     19% improved traction on snow The price refers to 4 or 5 complete wheels incl. fitting and balancing. This article is a bulky item. Note: For large brake systems from 363mm ø (D), a wheel spacer of 20mm per side must be fitted.       

Complete wheel set Radar Renegade R/T+ on Twin-Monotube-Project AT 20 9x20" ET40 for New Defender Available as 4 or 5 complete wheel set with different tyre sizes.Alloy wheel Mono-Twin-Project ATFor the Landrover New Defender as an authentic NO FAKE Allterrain rim, which is second to none. This means, beside the real exchangeable, screwable collision protection ring, 1000kg tested strength, the original connections, parts expertise especially for New Defender, suitable for orig. 20 inch works AT series tyres. For New Defender models with standard brakes no further parts are necessary, only for models with large brakes (Brembo) wheel spacers have to be fitted. Furthermore, optimum offsets to avoid grinding contact on brakes or wheel housing/bodywork and to avoid rework in this respect and to offer a perfect appearance and function even without spacers.The rims are available in satin black or terra.Alloy wheel Twin Monotube Projekt-AT 20 9x20", concave             for front and rear             Offset 40 5x120/72.6             Wheel connection M14x1.5 tapered 60 degrees             Wheel load: 1000 kg             For tyres: 20 inch series new Defender             Suitable for winter: Yes             incl. parts certificate and wheel nuts Summer tyres Radar Renegade R/T+The Renegade R/T+ is the new rugged terrain tyre series of the Radar Tyres Renegade family. This range is designed to offer exceptional off-road performance while maintaining comfort and refinement on the road. On the road, this tyre offers drivers superior handling with a smooth and even ride, while off-road it has the necessary handling of an MT tyre.The Renegade R/T+ offers a look that is both aggressive and rugged with excellent on-road and off-road performance, making it a combination of all-terrain and mud-terrain, offering only the best of both worlds. This range also features a dual sidewall design, offering riders the design choice of mud-penetrating sidewall with dagger-shaped "Side Biters" or the "Skull & Piston" look sidewall with wedge-shaped "Side Biters". These "Side Biters" provide additional traction and sidewall protection.Tyre data:         Vehicle type: SUV         Wet grip: B         Noise emission: 75 dB         Use: summer         Off-road: yes Features: Computer-optimised tread block sizes and shapes with multiple lateral grooves and angled sipes provide excellent traction on all terrains. The robust 3-ply construction reduces the risk of punctures and ensures safe handling on all surfaces. The wide, centre tread blocks help balance weight distribution and ensure that the tread wears evenly. Unique, state-of-the-art stone ejection technology that prevents stones from drilling into and lodging in the tread. The price refers to 4 or 5 complete wheels incl. mounting and balancing. This item is bulky goods.Note: For large brake systems from 363mm ø (D) a track widening of 20mm per side must be used.

CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg

GDW hitch bracket with 13-pin Erich Jaeger E set The New Defender L663 (from MY 2019) is not only an extraordinary off-road vehicle, it also packs a remarkable punch. The wide variety of engines from Diesel and petrol to PHEV deliver between 200 and 525 HP and 400 to 650 Nm torque. Its power makes the new Landy the ultimate towing vehicle up to 3.5t towing capacity. And the fact, that the trailer hitch –  whether detachable or electrically deployable –  has to be ordered as an extra, is not really a disadvantage. When configuring your New Defender it’s probably best to skip this feature and get a heavy duty towbar like the one from GDW with its 13-pin electric connector kit by Erich Jaeger. The advantages of the GDW trailer hitch are obvious: A 4-bolt mounting plate will fit the included towball hitch but also any other type of coupling, the GDW coupling block comes at a much more competitive price than the OEM parts. Installation and road use do not need to be technically certified, by the way. The GDW towbar was custom-designed specifically for the New Defender. It comes with detailed assembly instructions and a complete electrics kit. Installing the towbar will take approximately 3 hours. Please note:The GDW towbar may interfere with the sensors of the vehicle’s parking aid. If you rely on this system, you should use the original tow bar. Maximum towing:   3,5 t Maximum vertical load:   210 kg (the maximum drawbar load is specified by the vehicle manufacturer and can be found in the vehicle documents)

Switch panel for New Defender from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.

“Air conditioning” in the classic Defender was regulated by crank handles and had two settings: windows up and windows down. But modern times show no mercy and such anachronisms are getting the chop. The New Defender therefore boasts an AC with not only one but two climatized zones as a standard feature. But what if the vehicle is stationary for longer periods? While parking, camping or as a work vehicle on job sites? Dogs, kids and fresh air fanatics will appreciate it to no end if you bring our set of ventilation panels with you in the new Landy, be it for hot summers or holiday trips down south. When your vehicle is parked for longer stretches of time, the precisely made aluminum panels fit perfectly and firmly in the window gap and make sure there’s plenty of fresh air circulating while doors are securely locked. Unexpected rain showers and opportunistic thieves are kept out and kids or dogs are not suffering from a potentially dangerous heat trap. Even insects will stay outside due to mosquito netting on the inside of the panel. The black powder-coated panels perfectly match the style of the New Defender and are sold as pairs. Please note: In excessive heat, you should never leave your dog for longer stretches of time in a parked car, even if there is sufficient ventilation. Length: 550 mm. Suitable for Defender from year of construction 2020. <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Bumper protection in 3 colours What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer.

Power screwdriver bit 1/2 inch with plastic sheath, to protect the rim Features: Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m) Material: Chrome molybdenum steel (Cr-Mo), forged and hardened Suitable for impact wrench and torque wrench !

Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4. The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28. Scope of delivery: 23, 5 or 1 pcs

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.

Dotz Kalahari 8x18" steel rim New Defender, available in 2 colour options A powerful look and great performance make Dotz rims the wheels of choice for many off-roaders. The stunning 8x18“ aluminum Dotz Kalahari features 8 spokes and – with its all-black or black/polished bi-color design – it gives every New Defender an even stronger stance. And we mean that quite literally: the maximum wheel load of 1.15 tons will serve workhorses, expedition vehicles, camping conversions and other heavy duty 4x4s alike.  Please note: This version of the Kalahari will exclusively fit New Defender L663 with its minimum wheel size of 18 inches. The offset is 30 mm and the tire sizes range from 255/70R18 to 285/60/R18. Delivery includes an EU part certificate.  

Wheel spacers TREKFINDER for LAND ROVER New Defender LE 90/110 ATTENTION: NOT FOR STEEL RIMS - USE ONLY FOR ALUMINIUM RIMS Material made of aluminium, black, hard anodised SCOPE OF DELIVERY: Widening per axle +60 mm / +50 mm / +44 mm / 40 mm millimetres 2 pieces wheel spacers incl. mounting material 1 piece TÜV® parts certificate Assembly instructions Care and cleaning instructions Scope of delivery for 1 axle AREA OF APPLICATION: Vehicle manufacturer: Jaguar Landrover (GB) / 1590 Vehicle type: LE Trade name: Defender ABE-EG number: - e5*2007/46*0092* . . - e5*2007/46*0125* . . The use of wheel spacers is permitted for the following wheel sizes/rims/references: NOTES and REQUIREMENTS: A1) The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are of sufficient length.The screwed-on spacer rings are fastened to the vehicle with the fastening elements supplied by the manufacturer of the spacer rings (taper collar wheel nuts).The standard wheels are fastened with the standard fastening elements.It is particularly important to ensure that the length of the stud bolts in the spacer rings (free thread length above the wheel contact surface) corresponds to the length of the standard stud bolts, in this case approx. 28 mm (VA/HA). H1)The usability of snow chains was not checked. H2)There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met:Separate suitable certificates for the wheel/tyre combinations are available and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.If other wheel/tyre combinations are used, their suitability (clearance, handling, etc.) must be checked or proven separately.Use of the spacer rings on the front and rear axle or only on the rear axle.There are no technical objections to the additional use of tested chassis lowering or raising (with parts certificate or ABE).In the case of chassis lowering with non-standard end stops, the suitability of the conversion must be checked or proven separately.Use of the spacer rings on the front and rear axle or only on the rear axle. Furthermore, it is possible to combine spacer rings with different widths on the front and rear axle. For example:Axle 1 spacer rings with 20 mm width and axle 2 spacer rings with 30 mm width.Always use wider spacer rings on axle 2 than on axle 1. H3)All fastening elements must be checked with a suitable torque spanner after approx. 100 km of driving. H4)The instructions in the manufacturer's installation manual for the spacer rings must be observed.The installation of spacer rings is not permitted if the diameter of the spacer rings is smaller than the diameter of the wheel contact surface of the wheels.The spacer rings are not permitted in conjunction with steel wheels. H5)With regard to the track width change of more than + 2%, a laboratory report on the sufficient operational stability is available and deposited ( you do not need to bother ):No. 21-00075-AS-MUC-00 / 10.08.2021 / TÜV SÜD Auto Service GmbH. H6)The bolted 20 to 30 mm wide spacer rings are tested up to a wheel load of 1000 kg. H7)Also permissible with standard wheel/tyre combinations with tyre code LT. H8)Only in conjunction with LM wheels with corresponding "casting pockets" which can accommodate standard stud bolts or nut heads protruding beyond the wheel contact surface.The standard stud bolts may have to be shortened.The minimum screw-in length of all fastening elements of 7.5 turns must be maintained.