Das könnte Sie auch interessieren
slide 7 to 9 of 4
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
From
€319.00*
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).
Diameter : 16Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644
Product number:
HIGHPEAK-SUJI2-WM
Parts certificate TREKFINDER for tyre conversion SUZUKI Jimmy II Type GJ/HJ
€119.00*
Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15
With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre
for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*.
a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT)
1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping )
only 1 part certificate will be delivered, NO tyres, NO rims etc. !
the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery.
the use of snow chains is not permitted !
there is NO brand binding for the tyres !
NO additional mudguard extensions are required !
it is NOT possible to send the certificate by e-mail or fax !
Product number:
1-SUJI2TURHJ
Installation kit Suzuki Jimny GJ / HJ with Nolden 90mm combination fog light with daytime running light
€323.00*
Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights
Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life.
With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light.
Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play.
If you only need the adapter cables, you can find them here.
The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights.
Scope of delivery:
1 x pair of Nolden 90 mm LED daytime running/fog lights chrome
Adapter:
2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.
Note:
The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard.
Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).
Product number:
EIBASET-SUJI2-NO90
Ähnliche Artikel
slide 4 to 6 of 20
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
€130.00*
Good air circulation like with slightly opened windows and still no higher risk of rainwater or theft penetrating than with closed windows? And protection from various insects?
That is possible: with our ventilation panels with mosquito net. For a subtle appearance, the aluminum sheets, which are supplied in pairs, are powder-coated in black.
No clattering universal parts that "hold" somehow, but custom-made ventilation plates for the Suzuki Jimny 2.
Ideal not only for campers and dog owners, but also to avoid the build-up of heat when parking in the blazing sun. In addition, the super simple assembly: crank down the window, insert the ventilation plate, crank the window up, done!
Please note:At high temperatures, a dog should not belong in a parked car, even with sufficient fresh air!The ventilation plates must not be used while driving!
Material: aluminumSuitable for: Suzuki Jimny 2 (GJ & HJ)
<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Product number:
LBLH-SUJI2
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
€1,990.00*
Variant:
with end support (front and rear)
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs.
The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces.
The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories.
The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety.
The modules are supplied with all the necessary fastening material.
Wind deflector and end carrier are included in the scope of delivery.
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.
Product number:
CGB2-SUJI2-MAUWIND
Underride protection TREKFINDER for SUZUKI Jimny II type GJ FRONT AXLE made of 5 mm steel yellow galvanized
€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ front axle
suitable for all Jimny models of the type GJ built from the end of '2018
suitable for all engine and transmission types
suitable for all Vorderachsausführungen
made of 5 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS2K
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
slide 2 of 4
€35.00*
Content:
2 Piece
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
1-SUJI2TST
Weight:
0.5 kg
Door handle set TREKFINDER for SUZUKI Jimny II type GJ from 10`18 and type HJ for the right and left side - plastic black.