Complete wheel set BF Goodrich Mud Terrain T / A KM3 255 / 85R16 119Q on Wolf steel rims Goodrich Mud Terrain T/A KM3 255/85R16 119QThe off-road tire BFGoodrich Mud Terrain T / A KM3 is primarily intended for off-road use, it is less suitable for driving on paved roads. The tires of this type are characterized by a special tread, which is responsible for safety when driving off-road, as well as a reinforced construction. The MT tires are the best way out for drivers who need tires for mud and water when driving off-road and are not afraid of rocky slopes. The very deep grooves of the tread and the massive blocks make driving on these tires safe. Due to the wide gaps, the tire cleans itself up quickly, which makes driving easier on sand, for example. This typical terrain model is also reinforced so that drivers do not have to worry about the tire being destroyed when driving in difficult terrain. Available in:255/85 R16235/85 R16 click here LR WOLF Steel Wheel 6.5x16"- corresponds to part number ANR4583 PM- dimensions 6,5 x 16, offset 20,6TPMS sensor Alcar Plug & DriveTire pressure monitoring systems (TPMS) or Tire Pressure Monitoring Systems (TPMS) are systems built into motor vehicles for the constant monitoring of tire pressure. A distinction is made between direct (measure the tire pressure with a sensor in the wheel) and indirect (measure via the vehicle's ABS sensors) systems. If a pressure loss occurs in one or more tires, the driver is informed of this directly on the display inside the vehicle. TPMS fulfill four functions: They increase driving safety through better grip, more stable steering behavior and shorter braking distances You avoid increased fuel consumption due to incorrect tire pressure They prevent increased tire wear caused by insufficient tire pressure They reduce CO² emissions through lower fuel consumption and longer tire life

Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16 The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).   Diameter : 16Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644

Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5 After the great response to the J-01 wheel, we wanted to do something different with the second original design. We present you the HIGH PEAK J-02. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU). TÜV type approved and strength tested. Also compatible with JB43 (1998-2018) models. Made in Italy. Guaranteed European quality Bolt-on mounting with standard or raised chassis. No additional modifications required (depending on tyre size). Diameter : 15Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : matt black, anthracite, matt bronze or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644

Dotz Dakar 7x16” steel rim Dotz Dakar 7x16”, steel rim, ET 8, 5x165.1mm, color: either silver, black or bronze for Land Rover Defender 90 and 110, Land Rover Discovery 1 and Range Rover Classic. Due to the higher axle load, the rim is not suitable for the Land Rover Defender 130.   Please note that you need wheel nuts for steel rims; if you convert from alloy rims, these wheel nuts can NOT be used. You will then need our wheel nut set RMSF23. The Dotz wheel is supplied without the wheel nuts and hub caps shown.   Weight of one rim: 11.5 kg   Rims for the Land Rover Defender (except original rims) must be balanced bolt-centered or bolt circle-centered.   Please select the desired color.

For Land Rover Defender rims (DO716 and DO716B), material: chrome-plated stainless steel, price per piece.

Complete wheel set BF Goodrich 265/75R16 All Terrain T/A KO2 on Dotz steel rim for Defender 4 or 5 complete wheels with off-road tyres 265/75R16 BFG All Terrain T/A KO2 on Dotz Dakar (Dark) steel rim 7x16’ for Land Rover Defender, with certificate, different colours. Technical data: Rolling resistance: F Wet grip: B Noise emission: 74 dB Load index: 119 (load capacity: 1,360 kg) Speed index: R (170 km/h) M+S labelling: yes Snowflake symbol: yes You can download the current certificate (also for Defender from model year 2012) here: Expert opinion Dotz Dakar.Please let us know whether the white lettering on the tyre should be mounted on the inside or outside.The rims used are DOTZ DAKAR steel rims in 7 x 16 ET8 format with certificate for Land Rover Defender 90/110, Range Rover Classic and Discovery, which are available in silver or black.Please note: Wheel nuts for aluminium rims cannot be used on steel rims.Balancing Defender wheels on conventional centre-centring balancing machines often leads to errors. For this reason, we rely on a so-called stud centring system, which uses a special adapter plate to balance the wheel as if it were mounted on a vehicle.The tyre is suitable and permitted for winter use.The price refers to 4 or 5 complete tyres incl. mounting / balancing.This article is a bulky item.Compared to its predecessor (All Terrain KO), the BF Goodrich All Terrain KO2 tyre offers  a 20% more resistant tyre sidewall more composure even under extreme conditions  a longer service life on any surface  2x longer service life on gravel 15% longer life on tarmac 10% more traction on mud 19% improved traction on snow When ordering, please let us know whether the white lettering should be fitted on the inside or outside.