-
Shop by Vehicle
- New Defender
-
Defender, Discovery I & II, RRC
- Exterior Parts
- Lighting
- Recovery Gear
- Brakes
- Roof Racks
- Locking Differentials
- Electrics
- Spare & Service Parts
- Suspension
- Interior Parts
- Body Parts
- Air Intake
- Engine, Transmission & Exhaust
- Storage & Cargo Management
- Wheels & Tires
- Protection
- Parking Heaters
- Fuel Tanks & Accessories
- Fabric Gear
- Installation Flat Rates
- Discovery 3, 4 & 5
- Series I, II & III
- Ineos Grenadier
- Jeep
- Mercedes G
- Suzuki Jimny
- Pickups
- Others
- Parts
- Accessories
- Rooftop Tent & Outdoor
- Lighting
- Electrics
- Fabric Gear
- News, Sales, Stuff
€1,790.00
Prices incl. VAT; no shipping possible!
Die beste Investition in den Werterhalt ihres Fahrzeugs ist eine Behandlung mit dem bewährten Mike Sanders Korrosionsschutzfett und dem TimeMAX Unterbodenschutz - hier zum Pauschalpreis für den Land Rover Defender
Please make an appointment with us
Description
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for Land Rover Defender
Long-lasting corrosion protection for your Land Rover Defender: Using Mike Sanders Corrosion Protection Grease and TimeMAX underbody protection, our workshop team draws on 30 years of experience to protect known corrosion-prone areas – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection.
This helps protect your Defender's chassis, underbody and corrosion-prone bodywork against rust, avoid costly repairs and preserve your Land Rover's structural integrity over the long term.
The following services are included in the complete package:
- Comprehensive corrosion protection: Treatment of the chassis inside and out, underbody, wheel arches, axles, doors, tailgate and bonnet.
- Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas.
- Extensive protective masking: Careful masking of the entire vehicle, particularly bodywork, painted surfaces, windows, brakes and other components that must not be treated.
- Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for effective corrosion protection deep inside enclosed areas and long-term creeping action.
- TimeMAX underbody protection: High-quality protective coating for the entire underbody.
- Normfest Protector Wax: Additional corrosion protection in selected areas.
- Endoscopic inspection: Visual inspection of cavities before and after treatment.
- Reassembly and cleaning: Reinstallation of removed components and final cleaning.
A more detailed explanation of each service can be found below.
Your benefits – and what they mean for your Defender
- Long-term corrosion protection: Reduces contact between metal, moisture and oxygen, helping to slow down corrosion processes.
- Protection from within: Protects particularly vulnerable areas inside the chassis and bodywork, where rust often develops unnoticed for a long time.
- Long-lasting creeping action: Mike Sanders grease continues to reach narrow seams and gaps even after application, supplementing the original protective coating.
- Durable underbody protection: Reduces the impact of typical environmental conditions on treated metal surfaces.
- Three premium branded products: Different protective materials are combined according to their specific areas of application.
- Professional application: Disassembly, masking, specialist cavity probes and endoscopic inspections enable thorough treatment.
- Long-term value retention: Preventative corrosion protection helps preserve the vehicle's structural integrity and avoid expensive rust damage.
Our extensive experience in dealing with corrosion
We have been servicing and repairing Land Rover Defenders for 30 years and know from first-hand experience just how serious rust damage can become, particularly in concealed areas of the chassis and underbody. We are familiar with the typical weak points and understand what effective corrosion protection requires. Protect your Defender in good time, before minor rust spots develop into expensive repairs – helping to ensure a long service life and preserve your vehicle's value.
Comprehensive corrosion protection – protecting all relevant components
For effective long-term corrosion protection, it is essential to treat not only the visible underbody but also the internal cavities.
We treat the ladder chassis inside and out, the underbody, wheel arches, axles and corrosion-prone areas of the doors, tailgate and bonnet.
Moisture can accumulate inside the ladder chassis, along panel seams and in hard-to-reach body cavities. Rust often develops unnoticed in these areas, spreading from the inside out. Comprehensive treatment specifically protects these vulnerable areas and helps preserve the vehicle's structural integrity over the long term.
Disassembly – accessing concealed corrosion-prone areas
Effective corrosion protection must also reach areas that are concealed when the vehicle is fully assembled.
We therefore remove relevant covers and trim panels before treatment. This provides access to important application points and areas that would otherwise be difficult to reach.
It allows us to apply the protective materials precisely where they are needed, rather than treating only externally visible surfaces.
Protective masking – precise application without unwanted overspray
Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes.
Before application, the entire vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other components that must not come into contact with the protective products.
This extensive preparation enables controlled application and prevents unwanted contamination or interference with sensitive components.
Mike Sanders Corrosion Protection Grease – lasting creeping action inside cavities
The key advantage: the corrosion protection grease remains capable of creeping into narrow gaps and panel seams, even after application.
Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material deep inside the ladder chassis and other vehicle cavities.
The grease forms a protective film on the treated metal surfaces. Thanks to its temperature-dependent creeping properties, it continues to spread over time and can penetrate welded seams, overlapping panels and extremely narrow gaps.
How it protects: The grease film creates a barrier between the metal, moisture and oxygen. Unlike rigid coatings, it remains flexible and can continue to provide protection even when the material expands and contracts due to temperature changes.
TimeMAX underbody protection – protection against moisture, dirt and stone chips
The underbody is exposed to particularly demanding conditions and therefore requires a suitably durable protective coating.
Stone chips, dirt, road spray and road salt can damage or gradually wear away the factory-applied protective coating. Corrosion can then begin on exposed metal surfaces.
We use high-quality TimeMAX underbody protection across the entire underbody area to be treated. The coating forms a protective barrier against corrosion-promoting environmental influences and the typical stresses of both road and off-road driving.
It is the combination that makes the difference: TimeMAX protects the external underbody surfaces, while Mike Sanders is particularly effective inside enclosed cavities and narrow gaps.
Normfest Protector Wax – additional protection in selected areas
We also use Normfest Protector Wax in selected areas to complement the overall corrosion protection treatment.
This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film on the treated metal surfaces.
It is applied wherever its material properties are particularly suitable for the specific area. In this way, the different protection systems complement one another to create a corrosion protection treatment tailored to the vehicle.
Endoscopic inspection – checking cavities before and after treatment
Hard-to-reach areas should also be inspected – not just the visible surfaces.
Before treatment, we examine accessible cavities using an endoscope. This allows us to assess the condition of internal surfaces and identify possible rust spots.
Following treatment, another endoscopic visual inspection is carried out. This enables us to check the application and distribution of the corrosion protection material in the areas that can be inspected.
Reassembly and cleaning – completing the treatment properly
The complete package also includes professionally restoring the vehicle to its assembled condition after treatment.
Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components.
Finally, the areas affected during the work are cleaned. This completes the comprehensive corrosion protection treatment.
Vehicle condition and possible additional work
The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage.
If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle.
Mike Sanders treatment can also be worthwhile for older vehicles with existing rust. Further corrosion can be stopped by shielding the affected metal surfaces from oxygen, provided that the corroded areas are completely covered and sufficiently sealed by the protective material. Careful preparation of the affected areas is essential.
Booking an appointment and treatment duration
Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany.
Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich.
When placing your order, please select the wheelbase of your Land Rover Defender and provide your telephone number so that we can arrange an appointment. A member of our team will contact you using the telephone number provided to schedule your visit.
Alternatively, you can contact us first on +49 9181 466 644 to arrange an appointment before ordering the service.
The extensive treatment of the entire underbody, including the comprehensive masking required to protect the rest of the vehicle from overspray, normally takes 2–3 days.
How Often Should the Corrosion Protection Be Inspected?
Professionally applied corrosion protection provides long-term protection against rust and corrosion. Nevertheless, we recommend having the cavity and underbody protection inspected at regular intervals. How often an inspection is advisable depends primarily on how the vehicle is used and the environmental conditions it is exposed to. In particular, off-road driving, heavy road salt exposure and challenging weather conditions can place additional strain on the protective coating.
Our recommended inspection intervals:
- Intensive off-road use (Heavy Off-Road): annually
- Regions with heavy road salt exposure: annually
- Moderate off-road use or expedition vehicles in Northern Europe: every 2–3 years
- Moderate off-road use or expedition vehicles in Southern Europe: every 4–6 years
- Predominantly on-road use: every 7–10 years
During an inspection, the protective coating is checked to ensure it remains complete and intact, and to identify any areas that may require additional treatment. Regular inspections help maintain the vehicle's long-term value and allow potential corrosion issues to be addressed at an early stage.
Premium Long-Term Underbody and Cavity Corrosion Protection with Mike Sanders and TimeMAX for Land Rover Defender
Long-lasting corrosion protection for your Land Rover Defender: Using Mike Sanders Corrosion Protection Grease and TimeMAX underbody protection, our workshop team draws on 30 years of experience to protect known corrosion-prone areas – both inside and out. At our specialist 4x4 workshop in Berg bei Neumarkt, Bavaria, between Nuremberg and Regensburg, we offer professional underbody and cavity corrosion protection.
This helps protect your Defender's chassis, underbody and corrosion-prone bodywork against rust, avoid costly repairs and preserve your Land Rover's structural integrity over the long term.
The following services are included in the complete package:
- Comprehensive corrosion protection: Treatment of the chassis inside and out, underbody, wheel arches, axles, doors, tailgate and bonnet.
- Professional preparation: Removal of relevant covers and trim panels to gain access to hard-to-reach areas.
- Extensive protective masking: Careful masking of the entire vehicle, particularly bodywork, painted surfaces, windows, brakes and other components that must not be treated.
- Mike Sanders cavity protection: Hot-spray application using specialist cavity probes for effective corrosion protection deep inside enclosed areas and long-term creeping action.
- TimeMAX underbody protection: High-quality protective coating for the entire underbody.
- Normfest Protector Wax: Additional corrosion protection in selected areas.
- Endoscopic inspection: Visual inspection of cavities before and after treatment.
- Reassembly and cleaning: Reinstallation of removed components and final cleaning.
A more detailed explanation of each service can be found below.
Your benefits – and what they mean for your Defender
- Long-term corrosion protection: Reduces contact between metal, moisture and oxygen, helping to slow down corrosion processes.
- Protection from within: Protects particularly vulnerable areas inside the chassis and bodywork, where rust often develops unnoticed for a long time.
- Long-lasting creeping action: Mike Sanders grease continues to reach narrow seams and gaps even after application, supplementing the original protective coating.
- Durable underbody protection: Reduces the impact of typical environmental conditions on treated metal surfaces.
- Three premium branded products: Different protective materials are combined according to their specific areas of application.
- Professional application: Disassembly, masking, specialist cavity probes and endoscopic inspections enable thorough treatment.
- Long-term value retention: Preventative corrosion protection helps preserve the vehicle's structural integrity and avoid expensive rust damage.
Our extensive experience in dealing with corrosion
We have been servicing and repairing Land Rover Defenders for 30 years and know from first-hand experience just how serious rust damage can become, particularly in concealed areas of the chassis and underbody. We are familiar with the typical weak points and understand what effective corrosion protection requires. Protect your Defender in good time, before minor rust spots develop into expensive repairs – helping to ensure a long service life and preserve your vehicle's value.
Comprehensive corrosion protection – protecting all relevant components
For effective long-term corrosion protection, it is essential to treat not only the visible underbody but also the internal cavities.
We treat the ladder chassis inside and out, the underbody, wheel arches, axles and corrosion-prone areas of the doors, tailgate and bonnet.
Moisture can accumulate inside the ladder chassis, along panel seams and in hard-to-reach body cavities. Rust often develops unnoticed in these areas, spreading from the inside out. Comprehensive treatment specifically protects these vulnerable areas and helps preserve the vehicle's structural integrity over the long term.
Disassembly – accessing concealed corrosion-prone areas
Effective corrosion protection must also reach areas that are concealed when the vehicle is fully assembled.
We therefore remove relevant covers and trim panels before treatment. This provides access to important application points and areas that would otherwise be difficult to reach.
It allows us to apply the protective materials precisely where they are needed, rather than treating only externally visible surfaces.
Protective masking – precise application without unwanted overspray
Corrosion protection belongs on the intended surfaces – not on paintwork, windows or brakes.
Before application, the entire vehicle is carefully covered and masked. Particular attention is paid to protecting bodywork, painted surfaces, windows, the braking system and other components that must not come into contact with the protective products.
This extensive preparation enables controlled application and prevents unwanted contamination or interference with sensitive components.
Mike Sanders Corrosion Protection Grease – lasting creeping action inside cavities
The key advantage: the corrosion protection grease remains capable of creeping into narrow gaps and panel seams, even after application.
Mike Sanders Corrosion Protection Grease is heated to approximately 120 °C and applied using a hot-spray process with specialist cavity probes. This allows us to introduce the material deep inside the ladder chassis and other vehicle cavities.
The grease forms a protective film on the treated metal surfaces. Thanks to its temperature-dependent creeping properties, it continues to spread over time and can penetrate welded seams, overlapping panels and extremely narrow gaps.
How it protects: The grease film creates a barrier between the metal, moisture and oxygen. Unlike rigid coatings, it remains flexible and can continue to provide protection even when the material expands and contracts due to temperature changes.
TimeMAX underbody protection – protection against moisture, dirt and stone chips
The underbody is exposed to particularly demanding conditions and therefore requires a suitably durable protective coating.
Stone chips, dirt, road spray and road salt can damage or gradually wear away the factory-applied protective coating. Corrosion can then begin on exposed metal surfaces.
We use high-quality TimeMAX underbody protection across the entire underbody area to be treated. The coating forms a protective barrier against corrosion-promoting environmental influences and the typical stresses of both road and off-road driving.
It is the combination that makes the difference: TimeMAX protects the external underbody surfaces, while Mike Sanders is particularly effective inside enclosed cavities and narrow gaps.
Normfest Protector Wax – additional protection in selected areas
We also use Normfest Protector Wax in selected areas to complement the overall corrosion protection treatment.
This corrosion protection wax offers good wetting and creeping properties. Once dry, it forms a flexible, firmly adhering protective film on the treated metal surfaces.
It is applied wherever its material properties are particularly suitable for the specific area. In this way, the different protection systems complement one another to create a corrosion protection treatment tailored to the vehicle.
Endoscopic inspection – checking cavities before and after treatment
Hard-to-reach areas should also be inspected – not just the visible surfaces.
Before treatment, we examine accessible cavities using an endoscope. This allows us to assess the condition of internal surfaces and identify possible rust spots.
Following treatment, another endoscopic visual inspection is carried out. This enables us to check the application and distribution of the corrosion protection material in the areas that can be inspected.
Reassembly and cleaning – completing the treatment properly
The complete package also includes professionally restoring the vehicle to its assembled condition after treatment.
Once the protective materials have been applied, we remove the masking and reinstall the previously removed trim panels and components.
Finally, the areas affected during the work are cleaned. This completes the comprehensive corrosion protection treatment.
Vehicle condition and possible additional work
The fixed package price applies to new or nearly new vehicles without heavy contamination or extensive rust damage.
If more extensive cleaning or rust removal is required, the additional work will be charged separately. In such cases, we can only provide a firm price after inspecting and assessing the condition of the vehicle.
Mike Sanders treatment can also be worthwhile for older vehicles with existing rust. Further corrosion can be stopped by shielding the affected metal surfaces from oxygen, provided that the corroded areas are completely covered and sufficiently sealed by the protective material. Careful preparation of the affected areas is essential.
Booking an appointment and treatment duration
Please note: The treatment is carried out exclusively at our workshop in 92348 Berg bei Neumarkt in der Oberpfalz, Bavaria, Germany.
Our workshop is easily accessible and is located approximately 35 km from Nuremberg, 70 km from Regensburg and 145 km from Munich.
When placing your order, please select the wheelbase of your Land Rover Defender and provide your telephone number so that we can arrange an appointment. A member of our team will contact you using the telephone number provided to schedule your visit.
Alternatively, you can contact us first on +49 9181 466 644 to arrange an appointment before ordering the service.
The extensive treatment of the entire underbody, including the comprehensive masking required to protect the rest of the vehicle from overspray, normally takes 2–3 days.
How Often Should the Corrosion Protection Be Inspected?
Professionally applied corrosion protection provides long-term protection against rust and corrosion. Nevertheless, we recommend having the cavity and underbody protection inspected at regular intervals. How often an inspection is advisable depends primarily on how the vehicle is used and the environmental conditions it is exposed to. In particular, off-road driving, heavy road salt exposure and challenging weather conditions can place additional strain on the protective coating.
Our recommended inspection intervals:
- Intensive off-road use (Heavy Off-Road): annually
- Regions with heavy road salt exposure: annually
- Moderate off-road use or expedition vehicles in Northern Europe: every 2–3 years
- Moderate off-road use or expedition vehicles in Southern Europe: every 4–6 years
- Predominantly on-road use: every 7–10 years
During an inspection, the protective coating is checked to ensure it remains complete and intact, and to identify any areas that may require additional treatment. Regular inspections help maintain the vehicle's long-term value and allow potential corrosion issues to be addressed at an early stage.
Ludwig-Erhard-Ring 30
92348 Berg b. Neumarkt i.d.OPf.
Deutschland / Germany
E-Mail / Email: info@nakatanenga.de
Frequently Asked Questions about Underbody and Cavity Corrosion Protection for Land Rover Defender
1. How can I preserve the value and structural integrity of my Land Rover Defender over the long term?
The most important step is to prevent rust damage at an early stage. Alongside regular maintenance and cleaning, professional underbody and cavity corrosion protection helps protect particularly vulnerable areas of the vehicle against corrosion. This helps preserve the chassis and bodywork over the long term and can prevent expensive welding and repair work.
2. Where are the typical rust spots on a Land Rover Defender?
Particularly vulnerable areas include the rear crossmember, the ladder chassis and its internal cavities, chassis outriggers, bulkhead, door frames and various panel seams. Moisture and dirt can collect in these areas and cause corrosion. With 30 years of experience, our workshop is familiar with these weak points and treats them with particular care during the corrosion protection process.
3. Why does my Defender rust even though its bodywork is made of aluminium?
Although the classic Defender has many aluminium body panels, its load-bearing ladder chassis and numerous other components are made of steel. These parts can rust. In addition, galvanic corrosion can occur where aluminium and steel come into contact. Comprehensive corrosion protection is therefore important for the Defender despite its aluminium body panels.
4. How can I tell whether my Defender's chassis is already affected by rust?
Early signs include rust discolouration, flaking protective coatings and visible corrosion around welds and chassis joints. Rust inside the ladder chassis is particularly problematic because it can remain undetected from the outside for a long time. A professional inspection, using an endoscope where necessary, can help identify hidden damage at an early stage.
5. How should I properly treat existing rust on my Defender's chassis?
The first step is to establish how far the corrosion has progressed. Loose rust, dirt and damaged protective coatings must be professionally removed. Severely damaged or perforated sections may require repair. Suitable corrosion protection can then be applied to protect the treated metal surfaces over the long term. Simply applying a new underbody coating over existing rust is not a lasting solution.
6. Why is professional underbody and cavity corrosion protection more expensive than a basic underbody coating?
A basic underbody coating often focuses only on externally accessible surfaces. Our complete corrosion protection treatment also covers hard-to-reach cavities inside the chassis and bodywork. To achieve this, we remove relevant trim panels, carefully mask the vehicle and apply high-quality protection products from Mike Sanders, TimeMAX and Normfest directly to the vulnerable areas. Specialist cavity probes, endoscopic inspections, reassembly and cleaning are also included.
This additional work pays off in the long term: Rather than protecting only visible surfaces, we also help prevent hidden corrosion from developing inside the vehicle. This reduces the risk of costly rust damage and extensive repairs while helping to preserve your Defender's structural integrity.
7. When is the best time for underbody and cavity corrosion protection – summer or winter?
Ideally before winter, although treatment is possible throughout the year. The key requirement is that the vehicle is clean and completely dry. During warmer summer temperatures, Mike Sanders Corrosion Protection Grease can spread particularly effectively into fine gaps and seams thanks to its creeping properties. Having your Defender treated in good time helps protect it against moisture, road salt and dirt.
8. Do I need to wash or prepare my Defender before the appointment?
It is important that the vehicle is clean and completely dry before treatment. Mike Sanders Corrosion Protection Grease does not displace existing water. For this reason, sufficient drying time must be allowed, particularly after washing the underbody. We will discuss any necessary preparation with you before your appointment.
9. Can I carry out the underbody and cavity corrosion protection myself?
In principle, yes. However, professional corrosion protection requires experience, specialist equipment and appropriate personal protective equipment. Mike Sanders Corrosion Protection Grease must be heated to approximately 120 °C and applied using specialist spraying equipment. The process produces airborne spray mist, which must not be inhaled. For this reason, suitable respiratory protection, protective clothing, gloves and safety goggles are required, along with adequate ventilation. The specific protective equipment must comply with the safety data sheets for the products used.
Our advantage: With 30 years of workshop experience, professional equipment and endoscopic inspections, we can treat even hard-to-reach corrosion-prone areas. This saves you the considerable effort, the cost of purchasing specialist equipment and the risks associated with incorrect application.
10. Does the corrosion protection require regular maintenance after treatment?
No, Mike Sanders Corrosion Protection Grease does not normally require any special maintenance. However, we recommend having the corrosion protection checked after approximately 2–3 years. Stone chips and mechanical stress can damage the protective coating, particularly on the underbody and in the wheel arches. Any affected areas should be treated again if necessary.
11. Can Mike Sanders Corrosion Protection Grease leak out in hot weather?
Yes, small traces of grease may appear, and this is not a sign of poor application. In warm summer temperatures, the grease becomes more pliable and continues to spread inside the cavities. Excess material may therefore emerge from drainage openings in the doors, for example. These traces can be carefully wiped away.
12. Can I still drive my Defender off-road after the corrosion protection treatment?
Yes, of course. The treatment is particularly beneficial for off-road vehicles that regularly encounter mud, water and dirt. After demanding off-road trips, you should remove heavy dirt deposits from the underbody. This makes it easier to identify any damage to the protective coating and repair affected areas if necessary.
13. Which wax is best for cavity protection on my Defender?
Protective products with excellent creeping properties are particularly suitable for long-term cavity protection. We use Mike Sanders Corrosion Protection Grease, which, unlike many hardening waxes, remains flexible over time. When temperatures rise, it continues to spread into narrow gaps and panel seams, protecting even hard-to-reach areas against corrosion.
However, Mike Sanders Corrosion Protection Grease is less suitable for heavily exposed external surfaces such as the underbody. These areas are subjected to stone chips, dirt, road spray and other mechanical stresses. For this application, we have achieved excellent results with the considerably tougher TimeMAX underbody protection, which forms a durable protective coating. By combining the two products, we protect your Defender wherever their individual material properties are most effective.
14. What is the difference between rust treatment and underbody and cavity corrosion protection?
Rust treatment is a general term covering various measures used to combat corrosion. These include rust removal, protective coatings and preservation treatments. A basic underbody coating often treats only the externally accessible surfaces.
Professional underbody and cavity corrosion protection goes considerably further: it protects not only the underbody but also hard-to-reach areas inside the ladder chassis, doors and other body cavities. At Nakatanenga, we combine high-quality protective products from Mike Sanders, TimeMAX and Normfest for this purpose.
Your benefit: You protect your Defender against both external corrosion and hidden rust developing from within, helping to preserve the vehicle's structural integrity over the long term.
15. Are specialist cavity probes really necessary for effective cavity corrosion protection?
Yes. The cavities inside the ladder chassis and bodywork are difficult to access from the outside. Using specialist cavity probes, we introduce the heated Mike Sanders Corrosion Protection Grease directly into these areas. This enables us to reach critical locations that could easily be missed during a superficial treatment.
16. How often should underbody and cavity corrosion protection be inspected?
How often corrosion protection should be inspected depends mainly on how the vehicle is used and the conditions it is exposed to. Regular off-road driving, heavy road salt exposure and demanding weather conditions make more frequent inspections advisable.
We recommend the following inspection intervals:
- Heavy off-road use: once a year
- Areas with heavy road salt exposure: once a year
- Moderate off-road use or overland travel in Northern Europe: every 2–3 years
- Moderate off-road use or overland travel in Southern Europe: every 4–6 years
- Predominantly road use: every 7–10 years
Important: An inspection does not automatically mean the entire corrosion protection treatment needs to be renewed. In many cases, it is sufficient to treat individual areas where the protective coating has been damaged or worn away. If your vehicle was last treated ten years ago, we recommend having its current condition checked.
Customers also bought
Can of Mike Sanders Anti-Corrosion Grease - 25 kg Base price per 1 litre: EUR 10.42 Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 24 kilograms (€13.71 / 1 kilograms)
Prices incl. VAT;
Can of Mike Sanders Anti-Corrosion Grease - 4 kg Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 4 kilograms (€18.75 / 1 kilograms)
Prices incl. VAT;
Can of Mike Sanders Anti-Corrosion Grease - 750 g Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 0.75 kilograms (€26.67 / 1 kilograms)
Prices incl. VAT;