Tailgate Organizer - tailgate organiser system for various vehicles. Where to put all those little things in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organiser makes use of the mostly unused space on the tailgate. In several pockets with MOLLE attachment system (abbreviation for MOdular Lightweight Load-carrying Equipment), all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Laser-Cut compared to MOLLE with stitching: lighter in comparison, as much less sewing material is used quicker to attach and detach e.g. first aid bag flatter than sewn MOLLE  prevents unintentional snagging optimum hold and no slipping What is Molle? Information can be found in the downloads. The sets are made up as follows: Land Rover Defender:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny until year of construction 2018:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Suzuki Jimny 2:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Jeep Wrangler JK:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Mercedes G until year of construction 2018:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Universal 650x250 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 650x250 mm    optional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 740x350 mm    optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to rely exclusively on ecologically and health-safe alternatives such as nylon PU when coating textile products.Fastening: For mounting, the cover must be removed, for this our dismantling tool is perfectly suitable, then holes must be drilled, cover put back on and then only screwed on.To ensure the best possible availability of this product, the choice of bags supplied may vary in exceptional cases. If a single bag is not available, it will be replaced by a model of at least the same quality. Tailgate Organizer custom made:     We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser cut MOLLE panels. Should you require a different design, please enquire via the contact form.

Girling Shock Absorber, front For front, long wheelbase. For series:    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.

Girling shock absorber, rear For rear, short wheelbase For the following series:    Series 1    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers use fluid and seal technology to keep your Land Rover's suspension under control.

Girling shock absorber, front For front, short wheelbase For the following series:    Series 1 - 1954-1958    Series 2    Series 2A    Series 3 These traditional hydraulic shock absorbers feature fluid and seal technology to keep your Land Rover suspension under control.

Nakatanenga Seat Cover for Defender TD4 ('07 +) Nakatanenga seat covers for Land Rover Defender Td4 from 2007 These seat covers are now even more accurate than the previous ones and thus provide the ultimate protection with the highest comfort. Seat and back is made of high quality and breathable mesh material. The driver's and front passenger's seats are equipped on both sides with pratic Laser Cut Molle. This can also be found at the back of the seats. Furthermore, the driver and front passenger seats on the back have both a card pocket and a zipped pocket. The Molle offers a variety of possibilities. For example you can attach our practical bag set, with our tightening and fastening belt set fix small items or stow a first aid scissors within reach. The high-quality Laser Cut Molle on the backs of the backrests and on both sides of the front seats allows you to attach many different accessories. Driver or passenger side is 2-pieces each. (Seat cover + headrest)Rear seat is 5-pieces (3 headrests, 1 small cover, 1 large cover) Product features: large map pocket on the back of the backrest zipped pocket on the back of the backrest vlecro / loop tape on the headrests lasercut Molle attachment system for attaching additional bags or equipment (partially on the side and on the backrest) washable at 30 ° C perfect fit, no slipping extremely stable the customized slipcover is suitable for Land Rover Defender Td4 from 2007 Material: 1000D nylon PU coatedWashable 30-60° C Available: in black for front and rear seats Bundle: 2x seat covers for the front seats and 1x cover for the complete rear seat Please select the desired variant. Please note:In the variant "front" 1 piece is delivered - driver and passenger side have the same reference. So if you want to order a cover for the driver and front passenger side, you have to order 2x the variant Front.

Heavy Duty Suspension for Land Rover Defender 110, with Commercial HD Shock Absorbers Heavy Duty suspension for Land Rover Defender 110, with Commercial HD shock absorbers - with 4 springs (+30 mm) and 4 Terrafirma Commercial HD shock absorbers.In contrast to the individual components, you have a price advantage here with the complete suspension.

Heavy Duty Suspension for Land Rover Defender 110, with All Terrain Shock Absorbers Heavy Duty Suspension for Land Rover Defender 110, with All Terrain Shock Absorbers - with 4 Springs (+30 mm) and 4 Terrafirma All Terrain Shock AbsorbersIn contrast to the individual components, you have a price advantage of over 50,00€ with the complete suspension.

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.