Mobile parking heater with aluminum box, various versions Make way, here comes the second generation of our mobile parking heaters in a box! We have packed even more technology, even more experience and even more customer feedback into our new mobile heating boxes. If you are looking for a small, self-sufficient and portable heat source with unrivaled capacity for cold days and nights in unheated outdoor shelters or temporary accommodation, you get everything you need (or want) in a small, weatherproof aluminum box. Available in three modular versions with different configurations, the Nakatanenga heating box provides the perfect, independent heat source for tents, gazebos, garden sheds, mountain huts, snack stands, stalls and much more. The heart of the mobile parking heater is the Autoterm Luft 2D, a diesel-powered air heater with a maximum heat output of 1.8 kW and a diesel consumption of just under a quarter of a liter per hour at full power. With a tank capacity of 18 liters in the twin-tank version, this means that it can heat at full throttle for over 70 hours. The economical unit, which is also very quiet at 55 dB thanks to the exhaust silencer, is controlled by a digital control unit with timer in the version with two batteries and can also be switched on and off by radio remote control. This allows you to preheat your camper, roof tent, caravan or hunting lodge in good time for getting up or for the evening, for example, and operate it from the place where you are staying or sleeping inside*. In contrast to the previous models, the three versions of our mobile parking heater are now only available in one box size, namely 42 liters. This is significantly more compact than the old version in the large version and only slightly more voluminous than the small model from before. What is the advantage? The new universal crate has a modular interior with a powerful performance. Depending on whether you need tanks, batteries or both in the box, you can choose the appropriate version when purchasing: with 9.2 L single or 18.4 L double tank, each without battery, as well as with single tank, two batteries and digital control. However, it can also be easily retrofitted or converted if requirements change. This is made possible by elaborately designed brackets in the box and the use of specially manufactured, made-to-measure tanks.   Features of heating box 1 and 2 (without battery) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- PU5 control panel (without timer and storage options)- 12 V connection socket for supplied pole terminal cable- Alternatively, a cable for cigarette lighter (KMSH cable) can be used- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”   Features of heater box 3 (with 2 AGM batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)   Equipment of heating box 4 (with 1 LiFePo battery) - USB interface for charging smartphone, power bank, tablet etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)-> Please only use LiFePo-compatible chargers Equipment of heating box 5 (with 2 LiFePo batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”-> please only use LiFePo-compatible chargers The warm air is transported via a firmly screw-fastened, waterproof Flexi hose. As the warm air hose is different for every user and every requirement, we do not include a standard length, but leave it up to you to order the desired length separately here in the store, with or without a silicone sleeve. You can find the perfect storage bag for the Flexi hose here in the store. Regardless of the configuration, the mobile parking heaters are always easy to transport and make the difference between experiencing and suffering in the cold seasons. Whether it's an aurora safari, selling cookies at the Christmas market or winter camping in a roof tent, nothing is really fun if you freeze to death. *ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. In addition, for optimum heating performance, make sure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. Dimensions Internal dimensions 550x350x220 mm External dimensions 580x380x240 mm Empty weight: 2 tanks, without battery: 18 kg 1 tank, without battery: 16 kg 1 tank, 2 batteries: 36 kg Depending on how many starts are made, the battery lasts at least 40 h, but more likely between 60 and 70 h.  LiFePo4 batteries - i.e. batteries with a lithium iron phosphate cathode - are the ideal supply batteries for camping or electrical work on the move. In contrast to conventional lead-acid AGM technology, lithium batteries combine superior charging properties with much lower weight and volume and a long service life. LiFePo4 batteries can be deep-discharged without any problems, which sooner or later leads to irreparable damage with AGM batteries, as the rule of thumb here is that you should never draw more than 50% charge. If you are not dependent on the greater cold tolerance of AGM batteries, you should definitely consider the higher costs for LiFePo4 batteries and compatible charging technology. The weight and space savings, the long service life and the uncomplicated discharging and charging of the battery are strong arguments in favor of the investment. What's more, LiFePo4 technology is also extremely safe And a special note on aluminum: Although we take the utmost care during storage and shipping, as with all our products, aluminum boxes can always show minimal scratches, stains, dents or other surface features upon delivery. These are material-related and result from the specific properties of the light metal.  In contact with oxygen, aluminum forms a natural, corrosion-protecting patina and is also relatively soft compared to steel, which is three times heavier. This makes the material ideal for use in sheet metal, especially when weight and resistance are important. On the other hand, however, it also means that aluminum can never be completely free of patina or other marks, even on delivery: Small scratches, stains etc. therefore do not constitute grounds for complaint. Ultimately, aluminum boxes are intended to be robust objects of daily use. Like everything that is actively used, they develop an individual patina and every trace of use tells a story. So, have fun with it! Please note the variants without batteries:  Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating mobile parking heaters. The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this. Suitable battery boxes for operating the mobile parking heater              

End piece for warm air hose WALUFLEX Our 60 mm Flexi pipes for parking heaters are the perfect solution for transporting warmth and cosiness from A to B, whereby B can be one of our roof tents, a cold mountain hut or whatever else needs to be heated off-grid. The warm air pipes can be cut to any length and to ensure that the pipe ends are cleanly sealed or can be easily and airtightly extended, we have a silicone adapter for easy ratcheting. The adapter is the icing on the cake for our hot air ducts. It might work without, but it's definitely better with. For one thing, it is safer for people, equipment or cars because the edges, fringes and wire ends of the cut pipe disappear under the silicone cover and therefore have no chance of scratching, pricking or tearing. It is also very practical: one end of the silicone adapter is semi-permanently attached to the cut-off pipe with one of the cable ties supplied. The other end of the adapter can then be tightened to a connection or extension as required using the ratchet clamp (ideal for our parking heaters). Without the ratchet, the silicone adapter, which only makes the pipe 5 mm thicker, is a perfect and aesthetically pleasing end sleeve. After all, the eye camps with you and who wants to look at fraying pipe ends.    

Especially in difficult terrain, when off-roading, camping or on expedition, a solid, clean and flat surface can make all the difference, whether it’s for cooking and eating, doing repairs or simply to spread maps and GPS gadgets to navigate properly. Moreover, our foldable side table offers not only one but two surfaces, like a small shelf. While you’re running a gas stove on top, for example, you can use the lower shelf to prepare your food items, away from dust and dirt. The double table is robust, portable and folds away nicely. When you need it you simply attach it to the stainless steel fittings included in the kit. Removal is just as easy. The fittings can be mounted on the side of your vehicle or the rear door. If you want to keep the folding table permanently attached, use the two screws we’ve included in the kit specifically for that purpose. When driving, the table is simply folded up. The metal structure’s powder coated surface is highly resistant to scratches, abrasion and also to heat. While cooking, you can put warm pots and pans directly onto the table (Attention! Do not put boiling hot pots on the table, this can damage the coating). Additionally, the front edge of the lower shelf is bent upwards so that nothing can fall out when your vehicle is slightly tilted on uneven ground. Weight:3.9 kg Dimensions:folded 64 x 4 x 23.5 cm Color:Black

Cable with plug for cigarette lighter Suitable for our small mobile parking heater. 4 m cable  Plug for cigarette lighter Please note:  The plug can be loaded up to 16 A. The socket MUST also be rated up to 16 A. 

Warm shower upgrade kit 2.0 - combiBOIL with Comfort Boiler Control control panel This upgrade kit turns your existing / installed air heater into an integrated complete system for heating and hot water. It contains all the necessary connecting parts between the heater and boiler and all the components you will need to install the system. Since its development by us in 2017, the Warmduscher kit has been the simplest and most popular way of equipping touring vehicles or boats & yachts with hot air heating and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. Warm shower kit 2.0 - UPGRADE 2023The original Warm Shower Kit is now equipped with the combiBOIL hot water boiler. This upgrade makes hot water production even more versatile, convenient and safe. Choose the right one for your projectThe Warmduscher upgrade kit 2.0 is available with the combiBoil hot water boiler in various versions and three sizes. Please note:Especially if your heater is already installed, when selecting the volume, pay attention not only to how much water you want to heat, but also to how much space you really have left in the camper to install the boiler sensibly (it should be installed as straight as possible and not far away from the heater).Your currently selected configuration is displayed in the product title and in the drop-down menu. Scope of delivery: 1x combiBOIL hot water boiler with 7, 9 or 12 l capacity, with stainless steel boiler and heat exchanger, in the variant selected above Comfort Boiler Control control panel 2 x adapters for the hot air connections of the boiler 1x adjustable thermostatic mixing valve / scalding protection 2 x brass hose nozzles 1 x screw-on hose nozzle 2 x T-piece for water pipe 1 x G1/2" steel flex hose for the heat-resistant connection between the boiler and mixer Water hosesIf the water is to be used for drinking or cooking, we strongly recommend that the hoses are certified accordingly. This ensures that no harmful substances are transferred to the drinking water and that the taste and composition are not altered by the material.Drinking water-certified hose lines for hot and cold water are available here. Pressure reducer:The boiler is made of high-quality stainless steel and is precisely manufactured. Nevertheless, the inlet pressure should be limited to 1.5 bar.In all pressurized water systems and systems with submersible pumps with a built-in or separate non-return valve, a pressure reducer should always be used upstream of the boiler and set to 1 to 1.5 bar.You can find pressure reducers with pressure gauges under the following links.A safety valve for releasing excessive pressure no longer needs to be purchased separately with the Warm Shower Kit 2.0. combiBOIL has installed this ex works. Water pump:A decent pump brings the system up to the required pressure and circulates it. It must be powerful enough to ensure a good and even flow even with water filtration and allow the water system to run smoothly. Provided it is durable and repairable. You can get this pump here.

Warm shower kit 2.0 - Autoterm parking heater + combiBOIL with Comfort Boiler Control The original from tigerexped - but now even better! The Warm Shower Kit is the simple way to equip touring vehicles or boats & yachts with a hot air heater and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. How does the Warm Shower Kit 2.0 work:The Warm Shower Kit 2.0 can generate hot water in three different ways: Via an electric heating element, which means via electricity if you have just enough reserves, or are connected to shore power.Simply on the side when the heating is running - without consuming any additional energy. Hot water is the "waste product", so to speak.NEW: The boiler can be integrated into the engine's cooling water circuit to heat either the service water itself or a second water loop. Conversely, the engine can also be preheated to make starting more gentle (not suitable for use in arctic temperature ranges).Each of these three options has its advantages and can be used when it suits best. After a few days of self-sufficient camping in hot weather, for example, you don't want to leave the heating on, nor do you want to heat up the water from driving. However, if it is too warm for the heating, there is probably enough solar power in the batteries to generate hot water via the electric heating element. With the combination of three options, this kit always offers the one that fits perfectly in every situation. The options for integration into the cooling water circuit are as follows: Cooling water circuit heats the service water, i.e. the cooling water circuit is connected to the boiler and heats service water for showers etc. while driving. (Caution: As the temperature of the cooling water can rise above 100°C (due to pressure), the boiler must be prevented from overheating by means of a valve or by switching off the circulation pump).The boiler preheats the cooling water circuit (engine), which means that the above function is reversed. The engine cooling circuit can be preheated by connecting the boiler to a 230V/110V power source or by using hot air from the parking heater.Heating a second water loop, whereby the energy that is fed into the boiler via the electric heating element or hot air is fed into a second water circuit via a circulation pump. It is also possible to combine the two water circuits (so that the cooling water circuit heats the second water loop), although precautions must be taken with regard to the flow temperature from the motor. NEW: Integration of a second water loopWith combiBOIL it is possible to operate a second water loop with hot water. For example, underfloor heating or towel radiators can be implemented to make it easier to dry wet clothes and towels in the vehicle. Please note that an expansion tank must be integrated into the water loop and, depending on the application, the water may need to be circulated by a circulation pump. Scope of delivery:The Warm Shower Kit 2.0 consists of two main components (heater and boiler) and material to connect and install them to create a perfectly functioning system.

Hot water - Always and everywhere At home, you have warm water coming out of your taps, just like that. That’s why armchair travelers never really appreciate what a precious commodity that is. But if you spend enough time on the road or in nature – be it in a camper van, on a boat, in a food truck or a market stall – you will know what a truly great thing water is when it flows clean and warm wherever and whenever you need it. If you already have a diesel heater installed in your vehicle, boat or trailer – by AUTOTERM or an equivalent – you can easily upgrade to a warm water system. Pundmann have designed their mobile water heaters, the 6-liter Therm 6AIR and the 9 liter Therm 9AIR, specifically for AUTOTERM diesel heaters. Accordingly, installation is completely hassle-free. If you have a 230V power outlet available, you can run the water heater with the inbuilt 500W heating element. Whenever there is no electricity nearby, simply let your Autoterm (or equivalent) do the job of heating your water. It will take 50 minutes for the smaller 6-liter tank and 60 minutes for the larger tank. Operating pressure is at 1.5 bar/21.75 psi with a security valve limiting pressure to 2.2 bar/31.9 psi. Dimensions of 200 x 228 x 360 (6 l) or 200 x 228 x 520 (9 l) mm, respectively, make the tanks small enough to fit even in tight spaces. Mounting plates, adapters, pipes, mixing taps and other accessories can be found here. Last but not least, the tanks are made from stainless steel and meet food safety standards The article is suitable for any parking heater (gasoline, diesel, gas) from 2kw.

Mobile parking heater with aluminum box, various versions Make way, here comes the second generation of our mobile parking heaters in a box! We have packed even more technology, even more experience and even more customer feedback into our new mobile heating boxes. If you are looking for a small, self-sufficient and portable heat source with unrivaled capacity for cold days and nights in unheated outdoor shelters or temporary accommodation, you get everything you need (or want) in a small, weatherproof aluminum box. Available in three modular versions with different configurations, the Nakatanenga heating box provides the perfect, independent heat source for tents, gazebos, garden sheds, mountain huts, snack stands, stalls and much more. The heart of the mobile parking heater is the Autoterm Luft 2D, a diesel-powered air heater with a maximum heat output of 1.8 kW and a diesel consumption of just under a quarter of a liter per hour at full power. With a tank capacity of 18 liters in the twin-tank version, this means that it can heat at full throttle for over 70 hours. The economical unit, which is also very quiet at 55 dB thanks to the exhaust silencer, is controlled by a digital control unit with timer in the version with two batteries and can also be switched on and off by radio remote control. This allows you to preheat your camper, roof tent, caravan or hunting lodge in good time for getting up or for the evening, for example, and operate it from the place where you are staying or sleeping inside*. In contrast to the previous models, the three versions of our mobile parking heater are now only available in one box size, namely 42 liters. This is significantly more compact than the old version in the large version and only slightly more voluminous than the small model from before. What is the advantage? The new universal crate has a modular interior with a powerful performance. Depending on whether you need tanks, batteries or both in the box, you can choose the appropriate version when purchasing: with 9.2 L single or 18.4 L double tank, each without battery, as well as with single tank, two batteries and digital control. However, it can also be easily retrofitted or converted if requirements change. This is made possible by elaborately designed brackets in the box and the use of specially manufactured, made-to-measure tanks.   Features of heating box 1 and 2 (without battery) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- PU5 control panel (without timer and storage options)- 12 V connection socket for supplied pole terminal cable- Alternatively, a cable for cigarette lighter (KMSH cable) can be used- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”   Features of heater box 3 (with 2 AGM batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)   Equipment of heating box 4 (with 1 LiFePo battery) - USB interface for charging smartphone, power bank, tablet etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)-> Please only use LiFePo-compatible chargers Equipment of heating box 5 (with 2 LiFePo batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”-> please only use LiFePo-compatible chargers The warm air is transported via a firmly screw-fastened, waterproof Flexi hose. As the warm air hose is different for every user and every requirement, we do not include a standard length, but leave it up to you to order the desired length separately here in the store, with or without a silicone sleeve. You can find the perfect storage bag for the Flexi hose here in the store. Regardless of the configuration, the mobile parking heaters are always easy to transport and make the difference between experiencing and suffering in the cold seasons. Whether it's an aurora safari, selling cookies at the Christmas market or winter camping in a roof tent, nothing is really fun if you freeze to death. *ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. In addition, for optimum heating performance, make sure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. Dimensions Internal dimensions 550x350x220 mm External dimensions 580x380x240 mm Empty weight: 2 tanks, without battery: 18 kg 1 tank, without battery: 16 kg 1 tank, 2 batteries: 36 kg Depending on how many starts are made, the battery lasts at least 40 h, but more likely between 60 and 70 h.  LiFePo4 batteries - i.e. batteries with a lithium iron phosphate cathode - are the ideal supply batteries for camping or electrical work on the move. In contrast to conventional lead-acid AGM technology, lithium batteries combine superior charging properties with much lower weight and volume and a long service life. LiFePo4 batteries can be deep-discharged without any problems, which sooner or later leads to irreparable damage with AGM batteries, as the rule of thumb here is that you should never draw more than 50% charge. If you are not dependent on the greater cold tolerance of AGM batteries, you should definitely consider the higher costs for LiFePo4 batteries and compatible charging technology. The weight and space savings, the long service life and the uncomplicated discharging and charging of the battery are strong arguments in favor of the investment. What's more, LiFePo4 technology is also extremely safe And a special note on aluminum: Although we take the utmost care during storage and shipping, as with all our products, aluminum boxes can always show minimal scratches, stains, dents or other surface features upon delivery. These are material-related and result from the specific properties of the light metal.  In contact with oxygen, aluminum forms a natural, corrosion-protecting patina and is also relatively soft compared to steel, which is three times heavier. This makes the material ideal for use in sheet metal, especially when weight and resistance are important. On the other hand, however, it also means that aluminum can never be completely free of patina or other marks, even on delivery: Small scratches, stains etc. therefore do not constitute grounds for complaint. Ultimately, aluminum boxes are intended to be robust objects of daily use. Like everything that is actively used, they develop an individual patina and every trace of use tells a story. So, have fun with it! Please note the variants without batteries:  Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating mobile parking heaters. The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this. Suitable battery boxes for operating the mobile parking heater