Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Fog light Back
Zur Händlerkarte

similar article

Nolden 90mm LED Combination light with fog and daytime running lights, chrome
Nolden 90mm LED Combination light with fog and daytime running lights, chrome
NCC 90 mm LED fog & daytime running lights Daytime running lights and LED fog lights in one headlight! Control unit integrated. ECE and SAE certification. Characteristics: Daytime running light in fiber optic technology LED fog lights With and without metal holder Delivery: In pairs Technical specifications:Dimensions: 90x74 mmLEDs & Type: 3 pcs OSRAM H2L531.TE / OSRAM LUW HWQPVoltage: 12 and 24 VPower at 12 V: Daytime running light: 8.1WFog lights: 8.8 WMounting points: 4 Tapped holes M5Weight: 350 gCertifications: ECE R10, R19, R87, SAEVentilation: DiaphragmMaterial Housing: ADCMaterial of end plate: PC, hardenedTemperature range: -40 ° C - + 80 ° CLead and length: 0.75 mm2 FLRY, l = 200 mmPlug daytime running light: AMP Superseal 282087-1, three-poleFog lights: H8 / H11, two-pole
Product number: NETA90-CHR-2
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€320.00*
Suzuki Jimny GJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Product number: CBLSUJI2
Weight: 0,1 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€19.00*

you might also be interested in

Rear ladder for Suzuki Jimny 2 type GJ/HJ, from BJ 2018
CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ
Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.
Product number: CGB2-SUJI2-LADDER
Weight: 2,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€329.00*
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, in 3 colours
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16 The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).   Diameter : 16Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644
Product number: HIGHPEAK-SUJI2-WM
Weight: 10,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €319.00*
Select version
High Peak 02 for Jimny, various colours
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5 After the great response to the J-01 wheel, we wanted to do something different with the second original design. We present you the HIGH PEAK J-02. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU). TÜV type approved and strength tested. Also compatible with JB43 (1998-2018) models. Made in Italy. Guaranteed European quality Bolt-on mounting with standard or raised chassis. No additional modifications required (depending on tyre size). Diameter : 15Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : matt black, anthracite, matt bronze or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644
Product number: HIGHPEAK-02-SUJI2-AM
Weight: 10,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

From €359.00*
Select version
POWERspec Suzuki Jimny GEN2 1.5L (MY 2018) Clutch Kit
POWERspec Suzuki Jimny GEN2 1.5L, from MY 2018, clutch kit
POWERspec Suzuki Jimny GEN2 1.5L, from MY 2018, clutch kit The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Jimny Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Product number: LOF-21745P
Weight: 8,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€419.00*
Steering damper Jimny2
Steering damper reinforced TREKFINDER for SUZUKI Jimny II from MY 2018
Steering damper reinforced TREKFINDER for SUZUKI Jimny II from 2018 type GJ & HJ reliably reduces, prevents and eliminates steering wheel vibrations in/on your Jimny if all attempts and efforts such as balancing the wheels, adjusting the toe, correcting the caster, replacing the wheel and steering knuckle bearings, etc. have not been successful........this steering damper will certainly help you :) the installation of the steering damper is very easy and plug and play, the standard damper is simply replaced, the new steering damper fits to the standard mounting points. drilling, welding, deburring, painting etc. is NOT necessary for the installation of our steering damper very suitable for Jimny's WITH and WITHOUT lowering or raising the vehicle the Foam Cell technology in the twin-tube damper with 35 mm piston rod and maximum volume prevents the mixing of gas molecules in the oil, guarantees a long service life and perfect performance in ON- and OFFROAD OPERATION track adjustment is NOT necessary after assembly SCOPE OF DELIVERY: 1 piece TREKFINDER steering damper/Foam Cell Technology
Product number: 1-SUJI2LD
Weight: 3,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€199.00*
Bravo air intake for Jimny 2 GJ/HJ from MY 2018
Air intake Bravo Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018
Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018 The snorkel not only enables safe passage through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Product number: SSJN
Weight: 3,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€474.00*
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
Variant: with end support (front and rear)
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny –  due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs. The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces. The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories. The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety. The modules are supplied with all the necessary fastening material. Wind deflector and end carrier are included in the scope of delivery. Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.
Product number: CGB2-SUJI2-MAUWIND
Weight: 30,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€1,990.00*
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ BJ 2018 5-piece
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece suitable for all Jimny models of the type GJ built from the end of  2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel
Product number: 1-SUJI2UFSKK
Weight: 30,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€1,219.00*
Door handle shell set TREKFINDER for SUZUKI Jimny II Type GJ
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
Door handle set TREKFINDER for SUZUKI Jimny II type GJ from 10`18 and type HJ for the right and left side - plastic black.
Product number: 1-SUJI2TST
Weight: 0,5 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€35.00*
Jimny 2 molle
Modular vehicle panel for Suzuki Jimny 2 type GJ / HJ, for rear side windows, incl. mounting
All packed up for your trip? Of Course! But where is it? For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time. The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible. Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Product number: TACV-MFP-SUJI2
Weight: 1,0 kg
Parcel shipping
Available from stock - delivery time 1-3 working days

€119.00*

Installation kit Suzuki Jimny GJ / HJ with Nolden 90mm combination fog light with daytime running light

Fog lights and daytime running lights, Nolden
Auxiliary headlamp, Nolden
Set, combination lights for Suzuki Jimny GJ/HJ
Fog lights and daytime running lights for Jimny
Installation set Suzuki Jimny GJ for Nolden 90mm combination fog light with daytime running light
Nolden 90mm combination light, fog light, daytime running light
Adapter cable, Jimny 2
Fog lights and daytime running lights, Nolden
Auxiliary headlamp, Nolden
Set, combination lights for Suzuki Jimny GJ/HJ
Fog lights and daytime running lights for Jimny
Installation set Suzuki Jimny GJ for Nolden 90mm combination fog light with daytime running light
Nolden 90mm combination light, fog light, daytime running light
Adapter cable, Jimny 2

€323.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ Installation set Nolden 90 mm combination light ✔️ Suzuki Jimny GJ / HJ ✔️ 1 pair of fog lights with daytime running light ✔️ incl. 2 adapter cables 3-pin

Available from stock - delivery time 1-3 working days

Set
Product number: EIBASET-SUJI2-NO90
Weight: 1 kg

Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights

Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life.

With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light.

Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play.

If you only need the adapter cables, you can find them here.

The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights.


Scope of delivery:
  • 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome
Adapter:
  • 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.
 
Note: 
The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard.
Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).
 
 
Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...