Ähnliche Artikel

Jackall service kit for Jackall

Product number: NA-DA4058

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€22.00*

Upper clamp for retrofitting Jackall jacks

Jackall upper clamp for retrofitting for Jackall jacks

Jackall upper clamp for retrofitting for Jackall jacks Dimensions: 35x65x160 mm

Product number: NA-DA3130

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€69.00*

Jacks Bundles - jack, transport lock and protective cover

Car jack Bundle consisting of jack, yellow transport protection and protective cover. You can choose the bundle with different jacks: JackAll Jack, 60 inches / 152 cm JackAll jack, 48 inches / 122 cm

Product number: WAHEBU1M

Weight: 16,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €279.00*

Select version

Nakatanenga nylon protective cover for jack

Protect the mechanics of your jack from contamination The protective cover is suitable for Hi-Lift X-treme jack, as well as for all similarly built jacks (JackAll / HiJack / HiLift / Farm Jack / High Lift / HiLift / High Jack). The highly water-repellent outdoor fabric is longitudinal and transverse elastic. The material is not only water-repellent but also extremely easy-care and quick-drying as well as washable at 30 ° CThe material is also used for outdoor clothing, sports, hiking and trekking clothing. Despite the elasticity of the shell is extremely resistant to abrasion. With the zipper we decided on a specially covered version, which prevents the zipper becoming dirty. The loop allows a practical hold when closing the shell. The closure does not have to be cumbersome hooked to the bottom, but can now be easily and conveniently closed from above. The big advantage, compared to the previous protective cover:The shell is higher The zipper is covered and hooked from the top. Material: 92% polyamide (nylon) / 8% spandexThe material is water repellent, quick drying, easy to clean and washable at 30 ° C Made in Germany!This item is made to high quality standards in our home tailor shop. ATTENTION:The cover covers the mechanics, not the whole jack!

Product number: WAHESCH

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€49.00*

Emergency valve - Colby Valve Emergency

FOR AN EMERGENCY IN THE TERRAIN! It is quite annoying and very time-consuming when a tire valve is broken in the middle of the terrain.If it does happen, then we have the solution here:The extremely stable emergency valve from Colby Valve! This is inserted from the outside into the valve opening and fixed by a thumbscrew. The exchange is fast, uncomplicated and above all WITHOUT tools! You only need a few minutes because disassembly of the tire is not necessary. Basic information: 2 pack Installation from the outside no tools needed 20x more stable than conventional valves very good quality Should the wing nut disturb, then there is alternatively still the "Colby Valve Ultimate". This valve is much smaller, but can only be mounted with a tool. ATTENTION!Only for off-road use! Valve is not allowed in the area of StVo (German traffic regulations)

Product number: CV-EMERGENCY

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€39.90*

JackAll Highlift Jack - 60 Inch / 152cm

Technical specifications:Overall length: 152 cm (60 inches)Weight: about 14 kgCE standard 1.8 to / NATO approval 2.7 to We also offer a version with 48 inches /122 cm here in our shop.

Product number: NA-DA3122

Weight: 15,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€225.00*

Nakatanenga Hi-Lift bracket for Land Rover Defender 110

HiLift jacking bracket for Defender 110 Station Wagon Whether off-road or in normal operation, a good ratchet jack like the Hi-Lift is unbeatable in many situations, not only for recovery, but as a mobile replacement winch, as a spreading tool and much more. The only disadvantage: Hi-Lift, JackAll and other identical jacks take up a lot of space with their non-dismountable length of usually 48"/122 cm and definitely do not fit under the driver's seat like the small OEM standard jacks. But fortunately there are also other seats in the Defender 110 Station Wagon. The cavity under the rear seat bench offers the perfect space for Hi-Lift, Hi-Lift X-treme, JackAll & Co with a length of 48"/122 cm. This means that the Jack can be reached quickly if necessary and doesn't get in the way in the slightest when you don't need it. Simply fold down the rear seat and you have easy access to the Hi-Lift. In addition, the interior of the van naturally also offers the best protection against rust and dirt. And to prevent the jack from slipping, hitting or rattling while riding, we have a genuine Nakatanenga solution: a high-quality stainless steel rail that is simply screwed onto the seat bench bearings and holds the jack firmly and rattle-free between two easy-grip knurled nuts and four rubber pads. Incidentally, we also include a yellow transport lock with every steel rail to ensure that the lever tube also fits securely and silently. Even though the bracket is designed to fit the Defender 110 rear bench perfectly, it can of course also be mounted on any other suitable surface, in the Defender, in other 4x4s, on the inside of the loading area or on the outside of the roof rack, for example. Supplied without Hi-Lift Also suitable for JackAll 122 cm and other identical derivative products.

Product number: NAHUS

Weight: 15,7 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€135.00*