Bright, white light with minimal power consumption and a long service life - LED soffits make it possible! LED soffits for the Defender - Simple. Fast. Impressive. Do you love your Defender, but the interior lighting leaves a lot to be desired? With our new LED soffit, you can bring the latest lighting technology into your vehicle - and it's plug & play! The durable and vibration-resistant 39 mm LED soffit is a direct replacement for the bulb in the standard interior light(s) in the Land Rover Defender 90/110/130. Why an LED soffit? Our LED soffit has been designed to give you brighter, more efficient and stylish lighting. It's a perfect upgrade. Plug&Play - It couldn't be easier! No long installations, no tangled cables, no specialist knowledge required! Our LED soffit can be installed in just a few minutes. Simply remove the existing interior light, plug in the LED soffit and you're done. The plug & play system makes it possible - even for beginners. Advantages at a glance: Bright, uniform illumination: Thanks to state-of-the-art LED technology, the base centre provides pleasant, bright lighting in the interior.Daylight white; light colour 6000 KelvinVoltage: 12 V Energy-efficient: LEDs consume less power than conventional light bulbs, saving your Defender's battery. Durable: LEDs have a significantly longer service life and are resistant to vibrations and shocks. Easy installation: No workshop required - you can install the Soffitte yourself in just a few minutes.Ready to install - plug & play   Who is the LED soffit suitable for? Our LED soffit is the perfect solution for all Defender fans. It is suitable for the Defender 90 as well as for the Defender 110 and 130.  Please observe the polarity when installing! Scope of delivery: 1 piece  

NOLDEN 7" Bi-LED main headlights Generation 2 for Land Rover Defender NOLDEN 7" Bi-LED main headlight kit Generation 2 with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price per pair! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

Nakatanenga LED Bremsleuchte Hecktür für Land Rover Defender The 3rd brake light for the Land Rover Defender - as an easy-to-change plug'n'play LED light. Available colours (light colour is of course always red): Red (standard) Smoke grey (ideal for laminated windows) White (technical look) With E-mark and mounting material. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender.

LED signal light Land Rover Defender up to MY2016: Indicator rear/front, smoke grey This high-quality LED indicator is suitable for the Land Rover Defender and is available as a front and rear indicator. It has an E-mark, a diameter of 73 mm and impresses with its unique smoky grey colour. Suitable for Land Rover Defender up to MY2016 For these indicators you need our four-pole indicator relay, which also offers the feature of being able to set the indicator speed yourself.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

LED signal lamps for Land Rover Defender, smoke grey The advantages of LEDs are well known: low power consumption, strong light output, vibration resistance and a long lifetime. In this smoke grey signal lamp set for the Land Rover Defender (Series III, Defender 90, Defender 110, Defender 130) the following LEDs are included: The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The set with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The set with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light Note that indicators must be orange by law. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied and also an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light

Not only for healights, but also for all other signal lights on the vehicle LED bulbs have many advantages, apart from low power consumption and high light output, there is above all superior longevity and vibration resitance that make these bulbs desirable for owners of off-road vehicles. The standard-set with 8 bulbs contains: 2x front indicatior ligths 2x front position lights, either with or without day-driving light 2x rear indicators 2x brake/rear lights adjustable indicator relay The set with 9 bulbs additionally (aditionally to the standard-set) contains:  1x tailgate break light The sets with 10 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light and 1x reverse light→ OR 2x wing side indicators The sets with 11 bulbs additionally (aditionally to the standard-set) contain:  → 1x fog light, 1x reverse light and 1x tailgate break light→ OR 2x wing side indicators The set with 12 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light and 2x wing side indicators The set with 13 bulbs additionally (aditionally to the standard-set) contains:→ 1x fog light and 1x reverse light, 2x wing side indicators and 1x tailgate break light With each kit you have the choice of orange or white bulbs for the indicators. Note that indicators must be orange by law. The fog light is always supplied in red. If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp in order to mount the new round rear fog lamp and reversing lamp. As a rule, the original drill holes can then be used. All bulbs come with E-approval so that they can be fitted without further TUV recording. All bulbs come with correct plugs for simple replacement for vehicles from MY 1998 (TD5 und TD4). Fittings are supplied, as is an adjustable indicator relay that even allows to adjust indicator speed. Older vehicles can be retrofitted after removing the plug. This requires soldering. There is no need for an external day-light driving control unit as this is already included in the position lights for day-light driving function. The wiring for day-light driving requires some straight-forward soldering - illustrated instructions are supplied. As required by law, the day-light driving light illuminates with running engine and switches off once low-beam is selected. This signal lights kit is the ideal addition to our 7" Bi-LED main headlights, the LED license plate light and any additional LED spotlights - this brings the Land Rover Defender into the 21st century light-wise! Signal lights (indicators, position lights with or without day-driving lights, brake lights, fog light and reverse light, wing side indicators) in LED technology for Land Rover Defender. E-marked, white or coloured, various sets available. Plug&play for LR plugs for TD4/TD5 (from MY1998). Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights.  Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1.880 lm / 2.400 lm lumens measured: 1.550 lm / 1.700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting, price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing. How-to installastion video: https://www.youtube.com/watch?v=4ei6H69-huU

LED - Reversing light Product information:     LED-LIGHT    PRC7263LED    Reversing lightVehicle:    Defender - 1987 - 2006    Series 3

 LED - rear fog light Product information:    LED-LIGHT    Code: PRC7254LED    Rear fog lightVehicles:    Defender - 1987 - 2002    Series 3

Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.

Better visibility at night Improve visibility at night by upgrading your Land Rover's standard headlights to a better halogen headlight. suitable for:LAND ROVER DEFENDER 90/110/130 LHD Clear lenses and a profiled reflector on the back provide brilliant lighting. Scope of delivery:1 pair (2 pcs) with E-marking PLEASE NOTE: H4 bulbs are NOT included! 

LED rear fog lamp for Land Rover Defender, single 95 mm diameter waterproof to IP67 With E-mark and mounting material until MY2016 Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, 1x AMR3850 mounting base is required per lamp to mount the new round rear fog lamp. As a rule, the original drill holes can then be used.

LED signal light Land Rover Defender: rear fog light, smoke gray High-quality LED rear fog light for the Land Rover Defender in visually appealing smoke gray / smoke. The signal light has an E-mark and a diameter of 95 mm. Including SuperSeal connector 2-pin. If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lights. As a rule, the original drill holes can then be used. Please note that you can also purchase this rear fog light with other signal lights in a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!    

LED Tail Light / Brake Light for Land Rover Defender until MY2016, smoke grey This high-quality LED tail light / brake light is for the Land Rover Defender. It has an E-mark, a diameter of 73mm and impresses with the unique smoke grey color. Suitable for Land Rover Defender until MY2016Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need a 1x AMR3850 mounting base per lamp to mount the new round reversing lights. As a rule, the original drill holes can be used. Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note:The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires.Use only a screwdriver and NOT a cordless screwdriver!

This high-quality LED position light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the position light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

This high-quality LED tail light / brake light is for the Land Rover Defender. It has an E-mark, a diameter of 73 mm and impresses with the unique smoke grey color. Please note that you can also purchase the tail light / brake light with additional signal lights as a bundle with a price advantage: LED signal lights for Land Rover Defender. Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

Nakatanenga LED interior light Hunter, universal (not Defender), warm white In response to enquiries about how our Nakatanenga interior light for the Land Rover Defender can also be used in other vehicles, we have put together this set. It contains everything you need to use the light in cars, 4x4s, motorhomes etc. that do not have the original Land Rover interior light. Technical data: Light colour (warm white): 4,500 KelvinWavelength (red light): 625 nmVehicle voltage: 12 V (not suitable for 24 V vehicles!)Voltage range: 11-18 VPower consumption (at 12.8 V): 0.15 A (white light)Power consumption (at 12.8 V): 0.05 A (red light)    

LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

LED lights also offer advantages for interior lighting, like high light output, minimum power consumption, maximum vibration resistance and life expectancy. This is why we have asked a renowned automotive component supplier to produce an interior LED light for the Land Rover Defender for us. Our Nakatanenga LED Interior Light allows easy "plug & play" replacement of the standard interior light (front and back) of your Land Rover Defender. Lamps are sold separately, if you want to replace both lights please order this item twice. The cover and bulb of the existing light (AMR3155) are removed, the adaptor, LED circuit board and the new cover with switch are fitted - that's it, all tool-free and taking no more than 5 minutes! All previous functions of the interior light (on/off/door on) are kept, additionally you can switch to red light, which increases visibility at night. The last colour setting is stored.This is also useful for hunters or when hunting, as game perceives red light much less as an irritation than white light. Keyword eye adaptation: Red light is also used to avoid interrupting the dark adaptation of the eyes, as the eye reacts much more strongly to white light from a lamp, even at low brightness. As some dislike the typical cold-white light of many LED lights, we can also supply a version with warm-white (slightly 'yellower') light output. Unlike many other aftermarket lights, our LED interior light maintains the looks of the original. Can be used both for the front and rear interior roof light. Technical details: light colour (warm-white): 4.500 kelvinlight colour (cold-white): 6.500 kelvinwavelength (red light): 625 nmvoltage: 12 V (not suitable for 24 volts vehicles!)voltage range: 11-18 Vpower drain (at 12.8 V): 0.15 A (white light)power drain (at 12.8 V): 0.05 A (red light) Fits for all Defenders from 1985 to 2016 ATTENTION! The interior light can only be used in combination with the original Land Rover base. Please choose our universal bundle if you want to fit elsewhere or to a different make of vehicle.

The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-

Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)

Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle (when the lamps are mounted hanging down) - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting. When the lamps are mounted upright, the vehicle height is minimally increased. The one-piece bracket is made entirely of stainless steel, glass bead blasted and powder coated. It has four mounting eyes for individual headlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the headlamp connection cables (not supplied) can be neatly routed inside it. Eyelets for attaching cable ties round off the well thought-out details. For a neat installation, we recommend the Aquasignal cable grommet for the roof (so the light bar also remains easily removable) as well as our power distributor with fuse holder. Please also note our bundles with price advantage:     Nakatanenga Lightbar with 4 Vision-X LED Worklights UMX    Nakatanenga lamp hanger with 2 Vision-X LED spotlights LPX    Nakatanenga lamp hanger with 4 Vision-X LED spotlights Cannon Not combinable with the original Land Rover lamps and also not with Mantec lamps! Please select the desired colour of the lamp hanger. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

Nakatanenga Headlight Protection Grille for Land Rover Defender Nakatanenga headlight guards for Land Rover Defender 90/110/130 both protect your headlights from mechanical impact (e.g. branches) and also improve the appearance adding the classic look to your vehicle. In addition, with more and more high-value LED headlights being fitted, they also serve as an effective theft protection when useing the supplied theft inhibiting mounting kit. The lamp guards are produced locally from stainless steel and are powder coated in a very durable black coat which can be further painted in any colour (e.g. your vehicle colour). Included in delivery: two light guards, theft inhibiting mounting kit We have tested the guards with the following lights and can confirm that they don't cast any annoying shadows: OEM Land Rover headlights clear glas headlights Truck-Lite 7" LED headlights Nolden 7" LED headlights Further modals are being tested. The Nakatanenga headlight guards can be combined with the original light covers or our heritage-style covers.    

Nakatanenga protection grille wing indicators, for Land Rover Defender The Nakatanenga protective grilles for the mudguard indicators of the Land Rover Defender 90/110/130 are on the one hand a protection of the headlights against mechanical damage (e.g. by branches), on the other hand a design element, which belongs to the classical optics of the vehicle. They are a perfect fit for both the original turn signals and the Nakatanenga LED mudguard turn signals. The lamp guards are manufactured locally from stainless steel and can be given a high-strength black powder coating on request. This can be painted over (e.g. in car colour). Scope of delivery: Two indicator protection grilles, foam rubber base, anti-theft mounting material. Only available in stainless steel, black powder-coated!

LED rear fog light for Land Rover Defender, single With E-mark.Ready to plug in with SuperSeal 2-pin plug If the lamps on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per lamp to fit the new round rear fog lamps. As a rule, the original drill holes can then be used. Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover Defender Please note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver! 

LED turn signal rear for Land Rover Defender in white, single.With E-mark and a diameter of 75 mm. Suitable for Land Rover Defender until MY2016 Please note: The screws must not be tightened too much (only hand-tight!), otherwise the plastic housing can get cracks. Through these cracks, water could penetrate into the generally waterproof luminaires.Only use a screwdriver and NOT a cordless screwdriver!  

LED rear indicators for Land Rover Defender, orange, E-marked Suitable for Land Rover Defender until MY2016Please see our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender. Für diese Blinker benötigen Sie unser vierpoliges Blinkrelais, das zusätzlich das Feature bietet, die Blinkgeschwindigkeit selbst einstellen zu können.  Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!

LED signal lights Land Rover Defender up to MY2016: tail light / brake light, white LED brake light for Land Rover Defender in white, single.With E-mark.Suitable for Land Rover Defender up to MY2016If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round lights. As a rule, the original drill holes can then be used.Please also note our bundles with all signal lights and price advantage: LED signal lights for Land Rover DefenderPlease note: The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights.Only use a screwdriver and NOT a cordless screwdriver!