Land Rover Defender - Multifunctional Extension The multifunctional conversion for the Defender 110 TD4 offers an additional loading level with minimal conversion effort. This gives you additional storage space and, with the second row of seats folded down, a flat loading area approx. 180 cm long. The folding wooden cover provides privacy and also serves as a luggage compartment cover. The aluminium boxes are manufactured in skeleton construction and are therefore particularly light and space-saving. They are bolted to the wheel housing and can be fitted in just a few steps. The complete load compartment conversion consists of:     Aluminium box left, black powder-coated incl. wooden lid     Aluminium box right, black powder-coated incl. wooden lid     Foldable wooden shelf This article is bulky goods. The shipping weight differs from the actual weight of the goods. Weight of goods (total): 25,7 kg Note: 3 holes must be drilled per side to attach the aluminium boxes.

Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black The ABNTR4X4 Rockslider in black for the INEOS Quartermaster is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the rigidity under lateral loads in off-road use, the elongated holes on the sides are dimpled inwards. It is mounted on the original mounts without drilling. The Rockslider is mounted directly underneath the doors instead of the plastic panelling. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Quartermaster is not changed or impaired. The Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface of drawn studs. Thanks to its shape, the Rockslider also protects against excessive dirt in the field. The dirt picked up can be rinsed out again through openings on the underside. Technical data: Suitable for Quartermaster 25 kg per Rockslider incl. bracket Mounting on original fastening points Delivery: 1 set of Rockslider stainless steel, colour black (left & right) Bracket and fastening material (left & right) Set of galvanised screws Utility model protection: 20 2023 001 190.6 Shipped on a pallet. Registration by individual approval possible.

The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.

The high-quality sliders made of 3mm stainless steel fit all Mercedes G-models 461 and 463 and can be easily attached to the original stopping points of the running boards. The stable design offers optimal protection for your vehicle from the side and from below. The fitted shape fits perfectly to the silhouette of the vehicle and the high seat of the "G-Silde" also ensures an unchanged ramp angle. The distinctive design of Abeneuer4x4 also applies to this product "Made in Germany": the drawn knobs. These also offer a non-slip surface and ensure a secure stand. Dirt can be rinsed out through openings on the underside of the slider. Material:Stainless steel, black powder-coated Important NOTE:The original screwing points of the running boards must be available for smooth installation of the G-Slide. Scope of delivery:1 set of rock sliders (left & right) including holder and fastening material. As a useful add-on, there are matching anti-slip pads for the Rockslider.

Abenteuer4x4 - Rockslider - for Land Rover Defender The stainless steel Rockslider by Abenteuer 4x4 for the Land Rover Defender 90/110/130CC convince by a completely new design, low weight (approx. 12 kg/piece) and an easy mounting without drilling.To increase rigidity, two webs are welded on the back and the slotted holes on the long side are turned inwards.The Rocksliders not only serve to protect the bodywork, but also provide a secure foothold thanks to their non-slip surface made of drawn knobs, and their shape also protects against excessive dirt in the field. There are several openings on the underside for rinsing out dirt that has been picked up.The Rocksliders - made in Germany - are powder-coated black. Delivery includes fixing material.This item is bulky goods.Material: stainless steel, black powder coatedMaterial thickness: 3mm Delivery: 1 set Rockslider stainless steel (left & right)Bracket and fixing materialSet of screws stainless steel As a useful add-on, there are matching anti-slip pads for the Rockslider.You can find a suitable crossbar here.

Durable Aluminum Fender Plates – Non-Slip & Stable, Made in Germany Chequer plate wing top protection for all Land Rover Defender 90/110/130 from model year 2007. Made of 3mm aluminum with additional powder coating (all RAL colours). Supplied in pair with rivets. Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate.  

Adventure 4x4 - Rear tread plate Ineos Grenadier The ABNTR4X4 rear tread plate in black for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. Thanks to its shape, the tread plate not only protects the rear bumper but also ensures that the light influences in the reversing camera are minimised and thus the view is not impaired. Thanks to its studded surface, the rear kick plate fits perfectly into the Abenteuer4x4 product range. Bolting to original mountings. The tread plate can also be riveted to the bumper using the additional holes. Technical data: Suitable for Utility 2- & 5-seater Trial- & Fieldmaster Quartermaster Dimensions: 952x132x105mm (LxWxH) Weight: 2 kg Delivery: 1 x rear step plate INEOS fastener

Abenteuer4x4 - Recovery eye rear cross member Land Rover The recovery eye / towing eye from Abenteuer 4x4 has a 360° rotatable shackle pin made of stainless steel. The basic construction made of aluminium and stainless steel is screwed to the original mountings of the rear cross bar of the Land Rover Defender. In addition, a step with pulled knobs is integrated for easy access to the roof rack.Scope of delivery:    Spacer plate (10 mm aluminium, black powder-coated)    Carrier plate 1 with step (3 mm stainless steel, black powder-coated)    Carrier plate 2 (3 mm stainless steel, black powder-coated)    4 x 12 mm hexagon socket screw (stainless steel)    2 x 16 mm hexagon socket screw (stainless steel)    Bow shackle with 13 ton breaking load