Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
Go to homepage
Wishlist
Shopping cart €0.00*
Show all categories Fender Flares Back
Zur Händlerkarte

Ähnliche Artikel

slide 7 to 9 of 4
TREKFINDER Kotflügelverbreiterung
TREKFINDER mudguard extension-set universal, 35mm wide, 150cm long
ender flares TREKFINDER universal - 1 PIECE - 35 millimeters wide and 150 cm long - incl. TÜV® report inexpensive and flexible fender flares in very good quality indestructible and therefore durable fender flares made of black rubber ideal e.g. for track widening with wheels, spacers etc. - for prescribed registrations or off-road use the fender flares are glued in the wheel arch under the web edge of the bodywork the factory backing film is removed and the widening can be securely bonded to the clean surface/web edge for difficult off-road applications, additional fixing of the widening with screws is recommended the widening is 51 millimeters wide in total - of which approx. 16 millimeters are used for mounting and approx. 35 millimeters then protrude outwards to cover the tires SCOPE OF DELIVERY: 1 TREKFINDER mudguard extension 150 cm, including screws 1 TÜV® test report 1 type plate 1 piece fitting instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for 24 hours afterwards must be at least 20° Celsius the widener must be pressed evenly against the mounting surface with high pressure for approx. 1 minute after removing the 3M tape carrier film adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be followed, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended (fixing screws are included in the scope of delivery) The extensions are suitable for almost all vehicle types and vehicle models of all vehicle manufacturers, such as:Ineos Grenadier, Jeep, Land Rover, Ford, Nissan, Suzuki, Toyota and many others (cars, vans, off-roaders, construction machines, trailers, agricultural machinery, etc.).  
Product number: 9705-35600U-SET
Weight: 3,5 kg
Parcel shipping

Delivery time 5-10 working days

€135.95*
Wing Widening Kit Defender
TREKFINDER fender extension kit Land Rover Defender 20mm, 150cm long
Whether you’re going for a more muscular look or just better off-road performance, there are many good reasons to widen your Defender’s stance. You can go for fat MT tires or you can widen the track with wheel spacers or negative offset rims to achieve the desired effect. But keep in mind that your wheel covers may no longer be sufficient for your country’s road regulations and that in turn could affect your 4x4’s road legality. Apart from costly surprises in traffic stops, you also want to avoid potentially dangerous water and mud spray or debris being catapulted from exposed wheels. And then there’s also that slightly unbalanced look… At Nakatanenga, we thought there’s got to be a better solution than what’s out there and that’s why we teamed up with the experts at TREKFINDER to give you a functional, easily attached and exclusive solution to extend your existing original wheel arch guards. The result is a discrete self-adhesive rubber extension strip that widens the original Land Rover wheel arch guard by another 20 mm, simply by sticking it onto the original part. There’s no need to remove the original parts, drill new screw holes etc. The new guard’s protruding adhesive lip fits perfectly onto the original part and makes it very easy to position the 1.5 m extension perfectly. This should also work with identical after-market parts by Britpart et al, but with non-original parts we are unable to provide a warranty, of course. With a little experience and some planning, though, you can easily adjust the strips’ required length or their radius with a boxcutter and some sanding paper. Again, alterations are not covered by our product warranties. And last but not least, since our wheel arch extensions are self-adhesive, they are just as easily removed as they are mounted. Our Defender wheel arch extensions by Nakatanenga and TREKFINDER are available in a set of four with identical front and rear attachments and are exclusively available in our shop. Material:Black rubber, very good quality - flexible and almost indestructible Complete vehicle kit:4 pieces of 1,500 mm length each
Product number: 9705-20DEF
Weight: 1,0 kg
Parcel shipping

Delivery time 5-10 working days

Content: 6 running meters (€16.50* / 1 running meters)

€99.00*
Application example, Trekfinder mudguard widening 60mm
Mudguard widening universal, 2 pcs, 60mm wide, a 150cm long
Mudguard widening universal - 2 Pcs - 60 millimetres wide and a 150 centimetres long. An inexpensive, flexible and beautiful solution. The wing extension is made of robust hard rubber. The specified width of 60 mm is measured when mounted from the outer edge of the body. This means that the wing extension is 90 mm wide in total, 30 mm of which are available for mounting on the wheel arch, the remaining 60 mm are for covering the tyre. The fender extension is mounted from "below", i.e. for mounting on the vehicle there should be a minimum of 1 cm wide web edge (= wheel arch edge parallel to the tread of the tyre) in the wheel arch. The widening is screwed from below to the web edge with the fastening screws included in the scope of delivery. Scope of delivery: 2 pcs. wing extensions a 150 cm longFixing screws
Product number: KFVUNI-60
Weight: 1,5 kg
Parcel shipping

Delivery time 5-10 working days

Content: 3 running meters (€33.00* / 1 running meters)

€99.00*

Mudguard widening universal, 2 pcs, 60mm wide, a 150cm long

slide 2 of 5

€99.00*

Content: 3 running meters (€33.00* / 1 running meters)

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ inexpensive, flexible and beautiful solution ✔️ 2 pcs. ✔️ 60 mm wide ✔️ 150 cm long each ✔️ best quality ✔️ fast shipping

Delivery time 5-10 working days


Product number: KFVUNI-60
Weight: 1.5 kg

Mudguard widening universal - 2 Pcs - 60 millimetres wide and a 150 centimetres long.
An inexpensive, flexible and beautiful solution.

The wing extension is made of robust hard rubber. The specified width of 60 mm is measured when mounted from the outer edge of the body. This means that the wing extension is 90 mm wide in total, 30 mm of which are available for mounting on the wheel arch, the remaining 60 mm are for covering the tyre.

The fender extension is mounted from "below", i.e. for mounting on the vehicle there should be a minimum of 1 cm wide web edge (= wheel arch edge parallel to the tread of the tyre) in the wheel arch.

The widening is screwed from below to the web edge with the fastening screws included in the scope of delivery.

Scope of delivery:
2 pcs. wing extensions a 150 cm long
Fixing screws

Fast dispatch
Individual counselling
Rapid processing of enquiries
Technical advice: +49 9181 466 644
This website uses cookies to ensure the best experience possible. More information...