Das könnte Sie auch interessieren

Alan radio 150 CB antenna for fixed mounting

The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.

Product number: NA63806

Weight: 3,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€92.99*

Alan Funk 90 CB antenna for fixed mounting, length approx. 90cm, 200W, 4m cable with DV connector

Radio 90 CB antenna for fixed mounting Technical data: Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.

Product number: NA63804

Weight: 3,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€87.90*

Ähnliche Artikel

CargoBear Bracket for CB Radio Antenna

Bracket for CB antenna / radio antenna for CargoBear system roof rack Stainless steel, black powder-coated.Delivery without antenna, price per piece.- Suitable for all CargoBear 1 + 2 roof racks!

Product number: CARGOBEAR-CBS

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€22.00*

Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)

Mounting plate for CB antennas on Land Rover Defender, for left-hand drive (LHD) This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material

Product number: ALCB-FM

Weight: 2,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €69.00*

Select version

Nakatanenga antenna holder bumper

Name: Nakatanenga antenna holder bumper
Brand: Nakatanenga
SKU: NAANTH
Price: 18.0 EUR
Availability: LimitedAvailability

€18.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ for mounting an antenna on the OEM bumper of the Land Rover Defender 90/110/130 ✔️ all years of construction ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Product number: NAANTH

Weight: 0.2 kg

The Nakatanenga Antenna Holder allows easy mounting of an antenna to the OEM bumper of the Land Rover Defender 90/110/130, making it easy to fit a CB or amateur radio antenna.

The holder is made of stainless steel.