Ähnliche Artikel

Land Rover Defender rear cross member

High quality rear cross member suitable for Defender 90 or 110/130. Suitable for 1999-2016.

Weight: 45,0 kg
Freight forwarding

Available from stock - delivery time 1-3 working days

From €759.00*

Select version

Chequer plate cover plate for Land Rover Defender tailgate outside, from MY02

Checker plate cover plate for Defender 90/110 Cover plate for the rear door of the Land Rover Defender 90/110 (outside), material: anodised aluminium (3mm), different colours available, is mounted instead of the original spare wheel holder. The use of anodised aluminium has the advantage that the plate does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below. In model year 2002 there was a change to the rear door, unfortunately it is not possible to differentiate purely by model year here. Until 2002 the door was made of aluminium and the window was glued in. From 2002 onwards, the rear door was made of steel and the window is fixed by means of a rubber seal. The dimensions of the cover plate is 45x28 cm (from 2002). Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Weight: 1,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€69.00*

Select version

Checker plate supports bumper

Chequer plate bumper pads For Land Rover Defender, protects the bumper and provides a secure hold. Delivery in pairs, incl. rivets Material: Aluminium Material thickness: 2.5 mm base thickness / 4 mm incl chequer plate (quintet plate)

Weight: 0,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€37.00*

Select version

Reef corners for Land Rover Defender

Reef corners for Land Rover Defender 110 The ribbed corners on the rear of the Land Rover Defender protect it during off-road use and round off the appearance visually.Suitable for Defender up to MY2016.They are available for the Defender 110, in narrow or wide versions - see pictures. They are also available in various surface finishes - anodised aluminium, black and anthracite can be seen in the picture.They are always supplied in pairs and include the rivets required for fitting. Please select wheelbase, desired width and desired colour of the ribbed corners below. For Defender 110, in narrow or wide version, available in different colours, incl. mounting material, price per pair.

Weight: 3,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €75.00*

Select version

Chequer plate bonnet Land Rover Defender Td4

Checker plate bonnet Land Rover Defender Td4 - Plate on hump

Checker plate bonnet Land Rover Defender Td4 - plate on hump for Land Rover Defender from MY 2007, delivery includes rivets.The product is optionally available with anodised or black powder-coated surface, please select below.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €69.00*

Select version

Riffelblech Kotflügel eloxiert für Defender

Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC

Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC Chequer plate wing top protection for all Land Rover Defender TD4 / Puma 90/110/130 MY 2007-2016. Made of 3 mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. CLASSIC version. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer. Please note: the protective covers for Defender MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer

Weight: 5,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €149.00*

Select version

Chequer plate for spare wheel bracket, Defender, anodised

Chequer plate for bonnet, Land Rover Defender up to MY07, incl. rivets

Chequer plate for bonnet incl. rivets for Defender up to MY07 Picture 2 serves only as a colour sample for possible coatings, you order here the article in anodising.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Weight: 8,9 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€219.00*

Chequer plate bonnet, Land Rover Defender up to MY07, black incl. rivets

Chequer plate for bonnet incl. rivets for Defender up to MY07, black powder coatedIllustration symbolicMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Weight: 8,9 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€255.00*

Chequer plate for bonnet for Defender Td4, 2-piece

Riffelblechverkleidung für die Motorhaube Finally also available for the Land Rover Defender Td4 from MY07: chequer plate trim for the new bonnet. Two-part version, available in various colours/surfaces: anodised black powder-coated Delivery incl. rivets This article is bulky goods. Material thickness: 2.5 mm base thickness / 4 mm incl. corrugation (quintet plate)

Weight: 11,0 kg
Freight forwarding

Available from stock - delivery time 1-3 working days

From €249.00*

Select version

Chequer plate for bonnet for Defender Td4, 4-piece

Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet.Four-piece version, available in different colours/surfaces:- anodised- black powder-coated- powder-coated in desired colourDelivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Weight: 10,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €269.00*

Select version

Chequer plate mudguard for Defender, anodised

Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006

Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006 Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to model year 2006. Made of 3 mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. These chequer plates are rounded at the front and side to follow the shape of the front wing. For vehicles up to MY 2006 the protection plates include the antenna, for later models, the plates are shorther. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer

Weight: 4,6 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €159.00*

Select version

Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016

Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016 . Made of 3mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer. Please note: the protective covers for Defender form MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl chequer

Weight: 5,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €149.00*

Select version

Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender

Name: Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender
Brand: Nakatanenga
SKU: NARBHT-EL
Price: 109.0 EUR
Availability: InStock

€109.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ for Land Rover Defender ✔️ 3 mm sheet thickness ✔️ various colours ✔️ up to MY2016 ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Material

Piece

Product number: NARBHT-EL

Product information "Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender"

Nakatanenga chequer plate rear cross member for Land Rover Defender

Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm.

The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer.

The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant.

Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Jeep Ausrüstung: für Individualisten!

Jeep Zubehör: perfekt ausgerüstet!

Jeep Ersatzteile, Umbauten und Zubehör

Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender

Product information "Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender"

Nakatanenga chequer plate rear cross member for Land Rover Defender