LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting, price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing. How-to installastion video: https://www.youtube.com/watch?v=4ei6H69-huU

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle even when the lamps are mounted upright - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyes for attaching cable ties round off the well thought-out details.The bracket is equipped with two Vision-X LPX-910 LED spotlights, which have an E-mark. A total luminous flux of 8,874 lumens is generated from nine 9 LEDs per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). The luminaires have a narrow, wide-range illumination towards the front. The lamps can be mounted upright or suspended.Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-

LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting, price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing. How-to installastion video: https://www.youtube.com/watch?v=4ei6H69-huU

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle even when the lamps are mounted upright - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyes for attaching cable ties round off the well thought-out details.The bracket is equipped with two Vision-X LPX-910 LED spotlights, which have an E-mark. A total luminous flux of 8,874 lumens is generated from nine 9 LEDs per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). The luminaires have a narrow, wide-range illumination towards the front. The lamps can be mounted upright or suspended.Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-

LED Blinker für Land Rover Defender, weiß, NAS Style LED rear indicators for Land Rover Defender, white. Ideally suited for converting various special models of the Land Rover Defender with the ‘large’ NAS signal lights (diameter: 95 mm). With E-mark and mounting material. If the lights on the existing vehicle are square at the rear, you need 1x AMR3850 mounting base per light to fit the new round LED lights. As a rule, the original drill holes can then be used. Please note:  The item is supplied without a plug.  Please note:  The screws must not be overtightened (only hand-tight!), otherwise the plastic housing may crack. These cracks could allow water to penetrate the generally waterproof lights. Only use a screwdriver and NOT a cordless screwdriver!     

Side indicators for Land Rover Defender 90/110/130, E-marked, plug'n'play fitting, price for pair The indicators are available in orange, black and white, while flashing, of course, in orange. Because they are E-marked they can be fitted without TUV registering them. They work with the standard Defender indicator relay as well as with the adjustable indicator relay of our LED position light set - so you needn't buy or change the indicator relay! On Defender TD4 and TD5 the fitting is "plug&play", i.e. the plugs and sockets match and the wind does not need to be modified. Older vehicles (before MY1998) require the modification of the socket on the indicator side and the cutting on the wing. How-to installastion video: https://www.youtube.com/watch?v=4ei6H69-huU

Nakatanenga Lamp Bracket for Land Rover Defender The Nakatanenga lamp bracket is the answer to customer requests for a flat mounting solution for lamps on the Land Rover Defender, which does not increase the overall height of the vehicle even when the lamps are mounted upright - this means that, for example, the use of an underground garage / driveway is still possible without having to do without adequate lighting.The one-piece bracket is made entirely of stainless steel, glass bead blasted and black powder coated. It offers four mounting eyes for individual spotlights or the feet of one or two LED bars. It also has an additional mounting eyelet in the centre (facing backwards) that can be used for a GPS or radio antenna. The support tube has openings so that the connecting cables of the headlamps (not supplied) can be neatly routed inside it. Eyes for attaching cable ties round off the well thought-out details.The bracket is equipped with two Vision-X LPX-910 LED spotlights, which have an E-mark. A total luminous flux of 8,874 lumens is generated from nine 9 LEDs per lamp (raw), the power consumption is only 2.1 A (at 12 V), the lights are multi-voltage capable (9-32 V). The luminaires have a narrow, wide-range illumination towards the front. The lamps can be mounted upright or suspended.Cannot be combined with the original Land Rover lamps and also not with Mantec lamps! For a clean installation, we recommend the Aquasignal cable grommet for the roof (so the light bar remains easily removable) as well as our power distributor with fuse holder. The lamp bracket does not fit in conjunction with the following original Land Rover snorkel:

The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-