-
Shop by Vehicle
- New Defender
-
Defender, Discovery I & II, RRC
- Exterior Parts
- Lighting
- Recovery Gear
- Brakes
- Roof Racks
- Locking Differentials
- Electrics
- Spare & Service Parts
- Suspension
- Interior Parts
- Body Parts
- Air Intake
- Engine, Transmission & Exhaust
- Storage & Cargo Management
- Wheels & Tires
- Protection
- Parking Heaters
- Fuel Tanks & Accessories
- Fabric Gear
- Installation Flat Rates
- Discovery 3, 4 & 5
- Series I, II & III
- Ineos Grenadier
- Jeep
- Mercedes G
- Suzuki Jimny
- Pickups
- Others
- Parts
- Accessories
- Rooftop Tent & Outdoor
- Lighting
- Electrics
- Fabric Gear
- News, Sales, Stuff
€129.00
Prices incl. VAT; / Parcel shipping
↪️️ Ventilation grille / window vents with mosquito net ✔️ sold in pairs ✔️ Land Rover Defender ✔️ model years 2016 ✔️ fast shipping ✔️
Available from stock - delivery time 1-3 working days
Description
Nakatanenga window vents / ventilation grilles for the rear sliding boot windows (3 slits or one long slit) on the Land Rover Defender, up to model year 2016
It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.
That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.
A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.
Length 2-row louvred panel: 215mm
Length 3-row louvred panel: 270mm
- The ventilation plates are available individually, optionally for the left or right window.
- Please select the ventilation plate according to your windows:
If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)

If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)

⚠️Please note:
In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!
Nakatanenga window vents / ventilation grilles for the rear sliding boot windows (3 slits or one long slit) on the Land Rover Defender, up to model year 2016
It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.
That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.
A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.
Length 2-row louvred panel: 215mm
Length 3-row louvred panel: 270mm
- The ventilation plates are available individually, optionally for the left or right window.
- Please select the ventilation plate according to your windows:
If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)

If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)

⚠️Please note:
In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!
YouTube
Ludwig-Erhard-Ring 30
92348 Berg b. Neumarkt i.d.OPf.
Deutschland / Germany
E-Mail / Email: info@nakatanenga.de
Customers also bought
Flat Rate Installation fee for fitting a warm air duct pass-through to window ventilation panels – Various Models A warm air duct pass-through in your window ventilation panel lets you direct warm air where you need it: from a portable heater box into the vehicle interior or from a permanently installed air heater to your roof tent. We modify the ventilation panel and fit the pass-through for you. Neither you nor your vehicle needs to visit us: you can order a new ventilation panel with the modification already completed or send us your existing panel. Alternatively, you can drop it off in person. Option 1: Order a New Ventilation Panel Together with the Fitting Service (Recommended Option) Order the appropriate ventilation panel and this fitting service together from our shop. Use the comments field when placing your order to specify exactly where you would like the warm air duct pass-through fitted in the panel. We modify the panel to your instructions and send you the finished ventilation panel with the pass-through fitted within 2–3 days. There is no need to visit us or arrange an appointment. Option 2: Send Us Your Existing Ventilation Panel for Modification Already have a suitable ventilation panel? Order the fitting service online and send us your panel, quoting your order number, to Nakatanenga 4x4-Equipment GmbH & Co. KG, Ludwig-Erhard-Ring 30, 92348 Berg bei Neumarkt, Germany. Describe the required position of the pass-through in the comments field when placing your order, or mark it clearly on the panel. We fit the warm air duct pass-through and return the modified panel to you. No workshop appointment is required, and you do not need to bring your vehicle to us. Option 3: Drop Off Your Existing Ventilation Panel in Person Alternatively, you can drop off your existing ventilation panel at our premises. Please call us in advance on +49 9181 466 644 to arrange your visit. Depending on our workload, you may be able to take the finished panel away straight away or collect it after 1–2 days. Our workshop is located in 92348 Berg bei Neumarkt in the Upper Palatinate, Bavaria, near Nuremberg and Regensburg. The vehicle itself is not required for the panel modification. What the Service Includes Modification of the agreed ventilation panel at the required fitting position Fitting the warm air duct pass-through The required plastic pass-through fitting Price and Additional Components Required The modification and fitting are carried out at the stated flat rate fee, including the required plastic pass-through fitting. The ventilation panel and any additional heating accessories must be purchased separately. Depending on whether you want to direct warm air from a portable heater box into the vehicle or from a permanently installed air heater to your roof tent, you will need suitable components for your heating setup: Window ventilation panels for various vehicle models as the basis for fitting the warm air duct pass-through Waluflex warm air ducting to direct the warm air Matching end fitting for Waluflex warm air ducting Heaters for permanent installation for a heating solution permanently fitted in the vehicle Portable heater boxes to supply warm air from outside the vehicle Supported Vehicle Models The fitting service is available for various vehicle models with a suitable ventilation panel. Compatibility depends on the panel version used. When placing your order, please therefore provide the vehicle model, year of manufacture and product number of your existing panel or the panel you are ordering. Please note: If suitable ventilation panels are not currently available for your vehicle, you can tell us your vehicle model here; we will take this into account when developing new ventilation panels in the future. Requirements and Important Information Clearly specify the required fitting position in the comments field when placing your order. If you are sending us a panel, you can also mark the position directly on it. Please provide a telephone number in case we need to clarify any details. An appointment is only required if you are dropping off the panel in person. Any fitted wind deflectors may need to be removed before the modified panel can be used. On the adjustable universal ventilation panel, the pass-through can only be fitted when the panel is extended to its maximum length. The ventilation panel is individually modified to accommodate the pass-through. Please finalise the required position before the work begins.
Prices incl. VAT;
Roof liner set Colour: Light grey for Defender 110 - 1987 - 2016 - with Alpine window for Defender 90 - 1987 - 2016 - with Alpine window Say goodbye to sagging headliners: Our kits are made to replace sagging or worn fabric headliners and give your Defender's interior a much-needed facelift.Strong composite for durability: Made from a tough composite material with a textured finish, these kits offer greater durability and longevity than conventional headliners.Easy to clean surface: The wipe-clean surface of our headliner kits makes it easy to keep the interior clean and hygienic.Easy installation with existing clips: These headliner kits can be fitted using the existing clips in your vehicle, making installation quick and hassle-free.Perfect fit through moulding: Each headliner is precisely moulded to fit the contours of your Defender, giving it a professional and elegant look.Lightweight construction: Despite their rigidity and durability, our headliner kits are surprisingly lightweight, so they won't add unnecessary weight to your vehicle.
Prices incl. VAT;
Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery: 1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here
Prices incl. VAT;
A-pillar grab handle The easy-to-fit, stylish A-pillar grab handle makes it easier to get in and out of Defender. The handles are made from anodised aluminium. Available in black or silver Scope of delivery: 1 piece grab rail, fixing material.
Prices incl. VAT;
Double DIN panel for Land Rover Defender Instead of installing many individual devices in the vehicle's cockpit, it often makes sense to install a single, central device - this saves space, labour, wiring and reduces the risk of theft. Modern multimedia devices now combine a variety of functions such as navigation, hands-free system, rear view camera and vehicle diagnostics and can also play a variety of media - in addition to the classic analogue AM/FM radio reception, digital radio DAB is becoming more and more widespread, DVDs can be played in addition to CDs, MP3 files from USB sticks or hard drives can be played and iPhones or iPods can be controlled. WLan access points and the integration of Internet services such as Facebook can also be realised. In the Defender TD4 (from 2007), there is no space for this ex works. The double DIN installation kit offered here creates this space by relocating the switches to the sloping area between the centre console and the steering wheel, facing the driver. Furthermore, it provides space for the installation of any 52mm round instrument - e.g. an exhaust gas temperature or outside temperature display. This installation space can also be closed off by means of a dummy plug supplied. The panel is available in matt or glossy finish. We will be happy to advise you on the installation of your desired unit. We recommend multimedia devices from brand manufacturers such as Kenwood, Alpine or Pioneer. You can also have the double DIN panel installed in our workshop, including the switch and the multimedia device you brought with you (installation only possible up to 7" display).
Prices incl. VAT;
Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!
Prices incl. VAT;
Nakatanenga window vents / ventilation grilles for the rear side windows of the Land Rover New Defender, from model year 2020 The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm
Prices incl. VAT;
Nakatanenga window vents / ventilation grilles for the rear side windows of the Land Rover Discovery 1/2/3/4 model years 1989-2017 The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm
Prices incl. VAT;
Nakatanenga window vents / ventilation grilles for the rear side windows of the Defender 110/130 up to model year 2016 Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 500 mm
Prices incl. VAT;