Das könnte Sie auch interessieren
Alpha 9.9 winch system for Suzuki Jimny FJ
€2,499.00*
The Power Winch System Beta for the Suzuki Jimny
The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes.
Technical data:
Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours
Features:
Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation set
Cable winch
Aluminium cable window
Fastening screws
Plastic rope with hook
Pulley with hook
Cable remote control
Radio remote control
Operating instructions
TÜV parts certificate
Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.
Product number:
HSW9900JIMX
Alpha 9.9 winch system for Toyota Hilux Revo, from MY 2016
€2,499.00*
Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards
A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery.
Technical data:
Transmission 3-stage planetary gear
max. Tractive force 4300 kg
max. Pulling speed 15 m/min*
Motor power 3.8 hp
Engine type Series Wound**
Reduction ratio 110:1
Max. Power consumption 530 amps
Voltage 12 V
Rope (∅ x length) 10 mm x 30 m
Drum (∅ x length) 63 x 223 mm
Overall size (LxWxH) 574 x 160 x 225 mm
Weight of cable winch 29.1 kg
Weight of installation set 13.6 kg
Total weight 42.7 kg
Installation time 5 hours
Features:
Motor IP67 sealed by groove with sealing ring
Freewheel lever
Stainless steel cross braces
Reinforced cable drum
Powder-coated aluminium die-cast housing Motor/gearbox
Internal drum brake with 3 brake shoes
Removable control unit (so that the control unit can be installed as required)
Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation set
Cable winch
Aluminium cable window
Fastening screws
Plastic rope with hook
Pulley with hook
Cable remote control
Radio remote control
Operating instructions
TÜV parts certificate
Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.
Product number:
HSW9900TOHI16
Ähnliche Artikel
Cable winch 4.3to AlphaG 9.5 with gear brake 12 volt horntools with winch rope gray
€1,423.00*
In contrast to its predecessor, this model has a gear brake instead of a drum brake. The gear brake does not wear out compared to the drum brake and loses no braking effect when used for a long time.
The cable winch has a 3-year guarantee, but with the right care can give you a lifetime of pleasure.
Furnishing:
Remote control 1x cable 1x radio integrated (delivered without battery)Synthetic winch rope - optionally in gray or orangePotted reinforced relay (contactor) waterproofstable powder-coated contactor housing made of deep-drawn sheet metalMotor & gearbox IP67 sealed by groove with sealing ringremovable control unit (so that the control can be installed as desired)Freewheel lever * gear neutral position made of stainless steelCross struts and equipment made of stainless steelreinforced rope drum ** (suitable for use with plastic ropes)powder-coated aluminium die-cast housing motor / gearboxtransmission brakeCable length: 1.6 mCable cross-section: 35 mm²3 year guaranteeoperation manual
* A freewheel lever is used to decouple the gearbox and to unwind the winch quickly by hand.
** Plastic cables load the cable drums laterally by far more than steel cables
Technical specifications:
Working range voltage: 10-16 VoltMax. Power consumption 530 Amp **Train speed free of load 17 m / minuteTraction 4,300 kg **3-stage planetary gear 108: 1 geared downNet weight: 30 kg without rope and rope window4.6 KW Series Wound Motor *Drum (ØxLength): 63x216 mmOverall size (LxWxH): 612 x 160 x 270 mm
* Series motor with electrically generated magnetic field power = with a standard 70 AH battery** Values can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems the pulling power must be limited by the current / voltage.
Material
The cable winch is made of aluminum and high-strength stainless steel. High strength so that the steel can withstand the loads. This steel can also oxidize, i.e. if the parts are exposed to salt in winter, you should care for them every now and then and let them in with a thin oil film. We have provided maintenance instructions in the download area.
The pulling force of the winch is highest on the first or lowest rope layer on the drum.
Similar to a bicycle gear shift. The less rope there is on the drum, the slower the winch pulls and the more power it has.
Cable layer tensile speed1 4,300 kg 15 m / min2 3,500 kg 18 m / min3 2,950 kg 22 m / min4 2,550 kg 26 m / min
Scope of delivery:1 x winch1 x winch rope - optionally in orange or gray1 x winch window1 x winch hook
Product number:
HSW95G12V-ORGM
Cable winch system for Lada Niva
€1,099.00*
Cable winch set for Lada Niva / Taiga, including complete installation set
The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack.
WITH TÜV AND PARTIAL APPROVAL FOR GERMANY!
The certificate applies to vehicles up to the year of construction: see table below!
***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities.
NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas!
Technical specifications:
Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts
Transmission:3-stage planetary gearReduction: 166: 1
General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 21,7 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand)
Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook
TÜV for the following vehicle types:
Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2131 e2*KS07/46*0076* allM2131 e2 * KS07 / 46 * 0077 * .. all
Product number:
HWBLANI5000DYX
Cable winch set for Lada Niva / Taiga, including complete installation set
€1,249.00*
Cable winch set for Lada Niva / Taiga, including complete installation set
The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack.
***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities.
NOT SUITABLE FOR A LADA BRONTO with plastic bumper!
In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas!
WITH TÜV AND PARTIAL APPROVAL FOR GERMANY!
The certificate applies to vehicles up to the year of construction: see below!
Technical specifications:
Engine:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts
Transmission:Reduction: 166 : 13-stage planetary gear
General data:Max pulling force: 3600 kgMaximum train speed: 5,5 m / min (measured without load)Plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand)
Included accessories:cable remote controlfairleadmounting screwsoperation manualhookBumpers spacers
TÜV certificate for the following vehicles:
Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2121 e2*KS07/46*0076* all M2131 e2 * KS07 / 46 * 0077 * .. all
Product number:
HWBLANI8000DYX
Cable winch set for Lada Niva / Taiga including complete installation set
€1,499.00*
Cable winch set for Lada Niva / TaigaIncluding complete installation set
The extremely robust bumper fits the original stops on the Lada. Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack.
***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities.
NOT SUITABLE FOR A LADA BRONTO with plastic bumper!
In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas!
WITH TÜV AND PARTIAL APPROVAL FOR GERMANY!
The certificate applies to vehicles up to the year of construction: see below.In the case of other vehicle types, the TÜV must be contacted in advance as to whether the part is entered as the equipment carrier.
Technical data cable winch:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts
Transmission:Reduction: 210: 13-stage planetary gear
Generally:
Hornrope 7 to plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmNet weight: 32.8 kgGross weight: 35 kg
Furnishing:Aluminum rope windowExtremely durable powder coatingStainless steel one-way clutch (decouple the gearbox to quickly unwind the rope by hand)Control box removable for mounting not directly on the winch
Included accessories:Remote control with cableRope windowhookFixing screws 4xM10
We grant a 3-year guarantee on the gearbox and drum in compliance with the guarantee and service regulations.
TÜV certificate is for the following vehicles:
Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allM2131 e2 * KS07 / 46 * 0077 * .. all
Product number:
HWBLANI9500DYX
Front winch system Suzuki Jimny GJ/HJ
€1,699.00*
Front winch system Suzuki Jimny GJ/HJ
TÜV certificate for road approval in DE / AT
The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery.
The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex.
Scope of delivery:
Cable winch 2 to
25 m plastic cable
cable harness
complete cable winch control radio remote control (supplied without battery)
cable remote control mounting plate complete with installation material
installation material
installation & operating instructions
TÜV parts certificate.
Product number:
HSW9940JIMIIX
Kinetic recovery rope 19 mm diameter 8 m long including carrying bag
From
€99.00*
In this bundle you get our high-quality kinetic recovery rope together with a practical carrying bag made of mesh. The rope is available with either 19 mm or 24 mm rope thickness.
Product number:
BU-KINTO-248M
BEAR ROPE Kinetic recovery rope KERR 24mm thick, 8m long, oliv
€90.00*
Rope thickness:
24 mm für Fahrzeuge bis 4 t
BEAR ROPE Kinetic mountain rope KERR If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: green (the rope is available in color orange here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.
Product number:
KINTO-248-OLIV
Carrying bag for our 24mm strong and 8m long kinetic recovery rope
€39.00*
Mesh carrying bag for mountain ropes
Our robust and easy-to-clean Polyester mesh bag was initially developed by our Nakatanenga textile shop to hold the kinetic tow ropes. The big Kinto rope with 8 m length and 24 mm width fits perfectly into this 60 x 35 cm bag. Apart from the ropes, this mesh bag is absolutely perfect for everything else that comes dirty and dripping: sports shoes and hiking boots, rain gear, training equipment, water sports, you name it.
Using mesh as the primary material for bag, also means much nicer handling in comparison to ordinary closed materials. You can quickly pack wet and dirty ropes and let them drain and dry in the bag. That way, there is no chance for trapped moisture to contribute to any material deterioration and unpleasant moldy smells.
You can also use the mesh itself to grab and handle excessively dirty equipment without having to use your bare hands, if nothing else is available. That comes in especially handy in emergency recoveries on the road, because you’re never as likely to carry all the dirt into your car’s interior. After the job is done, you can easily hose down the rope within the bag.
Robust seams, a quality zipper, wrap-around handles and two orange loops for hanging or securing make this mesh bag one tough and durable receptacle for all your rough gear.
Material:
Polyester - washable up to 30°
Dimensions:
Width 60 cm
Height 35 cm
MADE IN EU
Product number:
TRATAKINTO
BEAR ROPE Kinetic recovery rope KERR 24mm thick, 8m long, orange
From
€69.00*
If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our orange KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange Length: 8 mDiameter: 19 mmBreaking strength: 8.6 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange (the rope is available in color olive here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.
Product number:
KINTO-248M
Recovery Shackle (rear) for Land Rover Defender Td5 and Td4
€73.00*
Recovery Shackle (rear) for Land Rover Defender Td5 and Td4
Heavy-duty recovery shackle for Land Lover Defender, made from steel. Mounts to the rear bumper.
Surface: zinc primer, black powder-coatedHolepattern: 85x45 mmMax. load: 10 t Incl. heavy-duty bolt with safety pinIncl. hardware
Product number:
BEO-HI-5
Recovery Shackle for Land Rover Defender, front Bumper
€62.90*
These recovery shackles (2-piece) fit the front bumper of every Land Rover Defender 90/110/130, with and without A/C. They are available in a red powder coat, black galvanized or passivated.
Assembly Information:
For vehicles with A/C it is important to disassemble the grill, then mount the shackles and then reassemble. All the necessary hardware is enclosed in the package.
Material Information:
Passivating is the process of making metal, or another substance, unreactive by altering the surface layer or coating the surface with a thin inert layer.
Max Load: 15 t
Dimesions:Length: 100 mmWidth: 80 mmHight: 48 mmHole diameter: 22 mm
Please chose the desired surface.
Product number:
BEOFDEF-VBM
Stainless Steel Recovery Shackle, rotating
From
€49.00*
Recovery shackle made from stainless steel, with stainless shackle and ring.
Product number:
BEOVA-KITM
HD shackle "Orange Pin"
€8.00*
HD shackle "Orange Pin"
High-tensile shackle "orange pin" with collared pin, rated for 3.25 tonnes, minimum breaking load 16 tonnes, bolt diametre 18 mm.
Important notice: the omega-shaped shackle allows for easier lacing and secure use with recovery ropes and tree straps as these are not "squashed" to the same degree as with conventional shackles.
Please note:The color of the bolt may differ from the color shown.
Product number:
SCH-OP
Stainless steel shackle 16mm / 2750kg
From
€19.00*
Stainless steel shackle 16mm / 2750kg
Shackle for recovering a vehicle, universally usable for attaching a pulley, a tree anchor strap or to a trailer hitch. At least two of them belong in every "species-appropriate" off-roader!Technical data:Material: stainless steelDiameter: 16 mmLoad capacity: 2750 kgBreaking load: 16500 kgType: optionally omega or straight
Product number:
SHVA16-GM
Stainless steel shackle 22mm / 4750kg
€55.00*
Stainless steel shackle 22mm / 4750kg
Shackle for recovering a vehicle, universally usable for attaching a pulley, a tree anchor strap or to a trailer hitch. At least two of them belong in every "species-appropriate" off-roader!Technical data:Material: stainless steelDiameter: 22 mmLoad capacity: 4,750 kgBreaking load: 28,500 kgDesign: straightThis heavy duty shackle is suitable for particularly heavy vehicles such as Land Rover Defender 130 with heavy cabin, Laplanders, Bremach, Iveco Daily etc.
Product number:
SHVA22-G
Nakatanenga Molle bags
From
€13.50*
Are you looking for a pack that allows you to organize your stuff? With these Molle bags you are ready for any event, you can attach the Molle bags to various straps, organizers, panels or backpacks with Molle system - examples are our Mole carrier for car seats and our Tailgate Organizer for Defender, Mercedes G, Jeep Wrangler , Suzuki Jimny or our universal Tailgate Organizer. The innovative MOLLE system (short for MOdular Lightweight Load-carrying Equipment) allows easy attachment of the bags and ensures their firm hold.
Material: 100% nylon
And by the way: At Nakatanenga, we only use materials with 100% nylon PU coating for all textile articles. Nylon PU (polyurethanes) is, unlike PVC, free from harmful phthalate-based plasticizers. Low molecular weight phthalates were until recently the most common plasticizers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are due to their molecular nature suspected of acting as the body's own hormones. This is toxicologically highly questionable and is considered the trigger for various diseases, including cancer. For Nakatanenga, it goes without saying that when it comes to coating textile products, it is only possible to use environmentally friendly and harmless alternatives such as nylon PU.
Product number:
NAMOL-O-BLKM
Tool Bag
€66.00*
Practical tool bag
What’s the best way to transport your tools and equipment? Case, box or bag? A bag will offer great advantages on the road, especially if it is as tough and high quality as our new Nakatanenga Bag. It is flexible, needs hardly more space than the actual contents and adds little extra weight on top. That makes our bag ideal to quickly pack, transport or store your gear, even in small spaces.
Heavy items aren’t a problem either due to the strengthened bottom of the bag, the wrap-around straps and the quality YKK zipper. And since bags are naturally less organized than cases or boxes, we have added four extra pockets on the inside, creating perfect spaces to store smaller objects separately.
Our Nakatanenga tool Bag is the ideal partner for jobs on the road: Small, light, robust and flexible in its use.
Material: 100% Nylon PU coatingZipper: YKK
DELIVERY WITHOUT CONTENTS!
And by the way: At Nakatanenga, we are exclusively using materials with 100 % Nylon PU coating for all our textile products. In contrast to PVC, Nylon PU (Polyurethane) contains no harmful, phthalate-based softeners. Until recently, lower-molecular-weight phthalates have been the primary choice for plasticizers in synthetic materials, even in food products and cosmetics. Phthalates accumulate in the environment, however, and are suspected to act like hormones due to their molecular similarity. Toxicologically, this is highly alarming, because it is assumed that these chemicals can cause many diseases, including cancer. For the coating of our Nakatanenga textile products, it is therefore no question for us to exclusively use non-toxic, ecologically sound alternatives that pose no health risks, like Nylon PU.
Product number:
WEZETA-GRYCOY
Nakatanenga soft shackle 10mm - breaking strength 12.000kg
€19.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
SHHMPE10MM-GRY
Weight:
0.2 kg
Nakatanenga Soft Shackle 10 mm – Breaking Strength 12,000 kg
In principle, soft shackles are incredibly low tech: They are simple rope loops with a stopper knot and a fixed noose. The shackle is held together and tightened by the very load it is meant to hold and is easily opened or fastened. Maybe it is the very simplicity of the concept that accounts for some users’ skepticism and lets them stick to steel shackles even when using synthetic rope. But a rope shackle’s advantages are huge: there is hardly any risks for injury, very little weight, no tools necessary, no corrosion, no scratching or denting of vehicle or equipment parts und no bending or jamming under load.
As with all synthetic ropes, extra caution should be taken to avoid friction damage, fraying, heat and contact with chemicals.
The rope shackles are available in grey and orange.
Color: Grey, Orange
Diameter: 10 mm
Break strength: 12,000 kg
Rope elongation: 4,8%