Das könnte Sie auch interessieren
Rods for raising the New Defender with air suspension, from model year 2020
From
€99.00*
Coupling rod/ Rods for height adjustment
Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes.
We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets.
Available as +1“ or + 1,6“.
Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.
Product number:
RODS-ND25M
Switch Panel for New Defender from MY 2020 onwards
€139.00*
Switch panel for New Defender
from year of manufacture 2020These switch panels have been designed to fit into the dashboard and accommodate 2 switches. The base comes with two switches and is made from durable ABS plastic that is easy to attach with the double-sided tape provided.
Product number:
DA3237
GDW hitch bracket incl. Erich Jaeger E-block 13-pin specific, for Land Rover New Defender Type LE
€927.00*
GDW hitch bracket with 13-pin Erich Jaeger E set
The New Defender L663 (from MY 2019) is not only an extraordinary off-road vehicle, it also packs a remarkable punch. The wide variety of engines from Diesel and petrol to PHEV deliver between 200 and 525 HP and 400 to 650 Nm torque. Its power makes the new Landy the ultimate towing vehicle up to 3.5t towing capacity.
And the fact, that the trailer hitch – whether detachable or electrically deployable – has to be ordered as an extra, is not really a disadvantage. When configuring your New Defender it’s probably best to skip this feature and get a heavy duty towbar like the one from GDW with its 13-pin electric connector kit by Erich Jaeger.
The advantages of the GDW trailer hitch are obvious: A 4-bolt mounting plate will fit the included towball hitch but also any other type of coupling, the GDW coupling block comes at a much more competitive price than the OEM parts. Installation and road use do not need to be technically certified, by the way.
The GDW towbar was custom-designed specifically for the New Defender. It comes with detailed assembly instructions and a complete electrics kit. Installing the towbar will take approximately 3 hours.
Please note:The GDW towbar may interfere with the sensors of the vehicle’s parking aid. If you rely on this system, you should use the original tow bar.
Maximum towing: 3,5 t
Maximum vertical load: 210 kg (the maximum drawbar load is specified by the vehicle manufacturer and can be found in the vehicle documents)
Product number:
ANHABO-NEWDEF
Tailgate Organiser for New Defender L663 from MY 2020, Rear Door
From
€119.00*
Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side. The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Product number:
NATGO-NEWDEF-HBM
Conversion kit bulkhead Land Rover New Defender 90/ 110
From
€474.00*
Bulkhead conversion kit
Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle.
Note: We are already developing a perfectly matching net as a partition wall.
Product number:
BHRB-NEWDEF-110M
Wheel nuts for steel rims New Defender, black
From
€7.00*
Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4.
The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28.
Scope of delivery: 23, 5 or 1 pcs
Product number:
NEWDEFRM-23M
Power screwdriver socket 1/2 inch for New Defender wheel nuts steel rim
€18.00*
Power screwdriver bit 1/2 inch
with plastic sheath, to protect the rim
Features:
Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m)
Material:
Chrome molybdenum steel (Cr-Mo), forged and hardened
Suitable for impact wrench and torque wrench !
Product number:
STENU-NEWDEF
Nakatanenga ventilation panels, rear side window - Land Rover New Defender from MY2020
€99.00*
“Air conditioning” in the classic Defender was regulated by crank handles and had two settings: windows up and windows down. But modern times show no mercy and such anachronisms are getting the chop. The New Defender therefore boasts an AC with not only one but two climatized zones as a standard feature. But what if the vehicle is stationary for longer periods? While parking, camping or as a work vehicle on job sites?
Dogs, kids and fresh air fanatics will appreciate it to no end if you bring our set of ventilation panels with you in the new Landy, be it for hot summers or holiday trips down south. When your vehicle is parked for longer stretches of time, the precisely made aluminum panels fit perfectly and firmly in the window gap and make sure there’s plenty of fresh air circulating while doors are securely locked. Unexpected rain showers and opportunistic thieves are kept out and kids or dogs are not suffering from a potentially dangerous heat trap. Even insects will stay outside due to mosquito netting on the inside of the panel.
The black powder-coated panels perfectly match the style of the New Defender and are sold as pairs.
Please note: In excessive heat, you should never leave your dog for longer stretches of time in a parked car, even if there is sufficient ventilation.
Length: 550 mm. Suitable for Defender from year of construction 2020.
<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Product number:
LBLH-NEWDEF
Seat cover for Land Rover New Defender 110/130, driver and passenger side, different colors
From
€239.00*
Seat cover for Land Rover New Defender 110/130, driver and passenger side
This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture.
To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls.
As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently.
Our seat protectors come in the colors Coyote or black with uni-colored mesh insets.
Material: Nylon, PU-coated
Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.
This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes!
And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Product number:
SIBE-F-NEWDEF-BLKM
Bumper protection for New Defender from MY2020, 3 colours
From
€49.00*
Bumper protection in 3 colours
What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper?
Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects.
Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee.
The protective wrap is available in black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme.
Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer.
Product number:
LAKASCHU-NEWDEF-GRYM
Nakatanenga sun visor organizer for Land Rover NEW DEFENDER from 2020, various colors
€89.00*
Content:
2 Piece
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
NASV-NEWDEF-GRY
Weight:
0.5 kg
Sun visors in your car offer few functions beyond the obvious: make-up mirrors for female passengers, maybe, or flimsy card holders for permits, IDs and similar items. We’ve been offering our popular and very successful universal visor organizers for quite some time now and they are the perfect solution to stack the humble visors with additional functions. If you are looking for great, custom-made organizers for both visors in a New Defender, look no further. Simply slip them on, fasten the Velcro straps, done!
MOLLE mesh enables you to attach any MOLLE cases or similar compatible accessories. The bands can also hold sun glasses, pens or small flashlights. Two zipper pouches are perfect for all smaller items that are easily lost: coins, keys, remotes, swipe cards and a lot more. A great place to keep your vehicle documents, parking permits etc. is the dedicated slot on the side of the visor. And to top it all off, our textile studio has worked a lot of Velcro fleece into the organizer so that you can attach all kinds of smaller items.
The trusted Nakatanenga sun visor organizer is tidy, versatile and allows for quick access to everything that’s important inside a New Defender!
Available in the colors black, gray and coyote. Delivery in pairs for driver and passenger side.