Das könnte Sie auch interessieren
Nakatanenga Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ
€99.00*
Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ
Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task. For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.
Product number:
UP-HTD-SUJI2
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
From
€319.00*
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16
The High Peak J-01 light alloy rim is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ (the parts certificate for HJ will follow shortly).
Diameter : 16Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644
Product number:
HIGHPEAK-SUJI2-WM
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
€599.00*
Side skirts with aluminum steps
The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points.
Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg
The aluminum slider is completely sufficient for light terrain.
Scope of delivery:
Rock slider left & right
mounting material
2x step-installation instructions
TÜV certificate
... and with an indescribable look for free
Product number:
HSJ2RSA02
CargoBear 2.0 crossbar - for Suzuki Jimny 2, GJ
From
€299.00*
CargoBear Roof Rack Crossbar
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks.
The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper.
If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material.
Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space)
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Suitable for all Cargobear 2 roof racks
Product number:
CGB2-SUJI2-LB1M
Ähnliche Artikel
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
€130.00*
Good air circulation like with slightly opened windows and still no higher risk of rainwater or theft penetrating than with closed windows? And protection from various insects?
That is possible: with our ventilation panels with mosquito net. For a subtle appearance, the aluminum sheets, which are supplied in pairs, are powder-coated in black.
No clattering universal parts that "hold" somehow, but custom-made ventilation plates for the Suzuki Jimny 2.
Ideal not only for campers and dog owners, but also to avoid the build-up of heat when parking in the blazing sun. In addition, the super simple assembly: crank down the window, insert the ventilation plate, crank the window up, done!
Please note:At high temperatures, a dog should not belong in a parked car, even with sufficient fresh air!The ventilation plates must not be used while driving!
Material: aluminumSuitable for: Suzuki Jimny 2 (GJ & HJ)
<iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Product number:
LBLH-SUJI2
CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ
€1,990.00*
Variant:
with end support (front and rear)
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs.
The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces.
The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories.
The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety.
The modules are supplied with all the necessary fastening material.
Wind deflector and end carrier are included in the scope of delivery.
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.
Product number:
CGB2-SUJI2-MAUWIND
Underride protection TREKFINDER for SUZUKI Jimny II type GJ FRONT AXLE made of 5 mm steel yellow galvanized
€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ front axle
suitable for all Jimny models of the type GJ built from the end of '2018
suitable for all engine and transmission types
suitable for all Vorderachsausführungen
made of 5 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS2K
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
€295.00*
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ transfer case
suitable for all Jimny models of the type GJ built from the end of '2018 and Type HJ
suitable for all engine and transmission types
made of 8 millimeters of aluminum
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS3K
CargoBear wind deflector for Jimny 2 CargoBear roof racks
€169.00*
Wind deflector suitable for CargoBear 2.0 Suzuki Jimny 2 (GJ)
Material: aluminum, black matt powder-coated
Incl. mounting material
Product number:
CGB2-SUJI2-WIND
CargoBear 2.0 crossbar - for Suzuki Jimny 2, GJ
From
€299.00*
CargoBear Roof Rack Crossbar
Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II.
The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks.
The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper.
If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material.
Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space)
Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.
Suitable for all Cargobear 2 roof racks
Product number:
CGB2-SUJI2-LB1M
Rock slider for the Jimny GJ and HJ
€599.00*
The rock slider for the Jimny GJ and HJ
Tight-fitting rock slider made of aluminum with steel holding structure.
To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front.
Replaces the original plastic sill protection.
The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate.
The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected.
Our Rockslider is made of high-quality aluminum and black matt powder-coated.
We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection.
The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit.
Scope of delivery:Rockslider left & rightGeneral operating license
Facts: Weight complete set (driver & passenger side): 9.kg
Product number:
HSJ2RSA01
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
€599.00*
Side skirts with aluminum steps
The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points.
Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg
The aluminum slider is completely sufficient for light terrain.
Scope of delivery:
Rock slider left & right
mounting material
2x step-installation instructions
TÜV certificate
... and with an indescribable look for free
Product number:
HSJ2RSA02
CargoBear awning holder for Jimny 2 GJ / HJ roof rack CargoBear
€54.00*
One of the best moments when car camping or attending a 4x4 meeting is when you unfold your side awning from the roof rack. It means you’ve arrived and all the enjoyment is ahead of you. Sheltered by the tarp, you can rest easy in your camping chair, put your feet up and think about the things to come over a coffee or a cold one.
Since there is now a CargoBear for the Jimny II, you can also mount a variety of car awnings on it. Our mounting brackets are made from black powder-coated stainless steel and are fixed to the lateral incline of at least two CargoBear cross bars. They fit amongst others the RoofLodge Awning, RhinoRack Foxwing and RhinoRack SunSeeker.
All fixing materials to the roof rack are included. Not included is the fastening material for the awnings themselves.
suitable for all CargoBear 1 + 2.
Product number:
CGB2-SUJI2-MH
Underride protection TREKFINDER for SUZUKI Jimny 2 Type GJ BJ 2018 and Type HJ
€249.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized
suitable for all Jimny models of the type GJ built from the end of '2018
suitable for all engine and transmission types
suitable for all rear axle versions
made of 5 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty version
Product number:
1-SUJI2UFS5K
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
€169.00*
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM
suitable for all Jimny models of the type GJ built from the end of 2018 and Type HJ
suitable for all engine and transmission types
from 3 millimeters of steel
yellow galvanized
including all mounting parts
attachment to original points of the vehicle
Product number:
1-SUJI2UFS4K
Lifting suspension TREKFINDER for SUZUKI Jimny II +40-50 mm, type GJ / HJ
From
€1,279.00*
Lifting suspension TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lifting is about 40-50 millimeters.
Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*..
SCOPE OF DELIVERY 1-SUJI2F1:
2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F2:
2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F3:
2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate
SCOPE OF DELIVERY 1-SUJI2F4:
2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate
Translated with www.DeepL.com/Translator (free version)
Product number:
1-SUJI2F1M
Chequer plate supports Suzuki Jimny, type GJ / HJ
€59.00*
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Product number:
1-SUJI2RBS
Modular vehicle panel for Suzuki Jimny 2 type GJ / HJ, for rear side windows, incl. mounting
€119.00*
All packed up for your trip? Of Course! But where is it?
For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time.
The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible.
Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides
Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Product number:
TACV-MFP-SUJI2
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
€35.00*
Door handle set TREKFINDER for SUZUKI Jimny II type GJ from 10`18 and type HJ for the right and left side - plastic black.
Product number:
1-SUJI2TST
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
€79.00*
Door guard set TREKFINDER for SUZUKI Jimny 2 from 10`18, Typ GJ and HJ for the right and left side.
Product number:
1-SUJI2SLT
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
€1,219.00*
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
suitable for all Jimny models of the type GJ built from the end of 2018, Typ HJ
suitable for all engine and transmission types
including all mounting parts
attachment to original points of the vehicle
super stable and flat heavy duty versions
Delivery:
underride protection linkage 5 mm anodised aluminum
underrun protection axle tube / differential front axle 5 mm galvanized steel
underride protection transfer case 8 mm aluminum
underride protection exhaust gas control system 3 mm galvanized steel
underrun protection axle tube / differential rear axle 5 mm galvanized steel
Product number:
1-SUJI2UFSKK
Nakatanenga trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
€17.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
KOW-SUJI2
Weight:
1 kg
Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself.
The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose.
As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.