combiBOIL hot water boiler for campers - More heating options & functions thanks to full Autoterm integration combiBOIL - One boiler, all optionscombiBOIL is unique in its market segment in terms of quality and range of functions.It offers three different options for water heating: With an electric heating cartridge. Using hot air from a parking heater. Via integration into the engine cooling circuit / with a water heater The combination of these options offers maximum flexibility and efficiency in various areas of application. Monitored and controlled by Autoterm Comfort Boiler Control: The Autoterm Comfort Boiler Control control panel (a further development of the Comfort Control) is specially designed for Autoterm heaters and combiBOIL hot water boilers to work together.The integrated thermostat function in the versions with 12V /230V heating elements enables extremely convenient and safe operation of the hot water system. All heating control options are retained. Your advantages: Display of the water temperature in real time, even on the SleepScreen Water temperature can be preset from 50 - 80 °C Adjustable hysteresis to 5 - 25 °C from the target temperature Overheating protection (configurable): Heating switches off automatically before the water temperature reaches a critical point. Normally, a control flap is no longer required to regulate the boiler. Frost protection: If the water temperature drops to 2 °C, the heating system automatically heats the water to +15 °C and the ambient air to +7 °C. The boiler and water pipes are reliably protected against frost damage. The Autoterm Comfort Boiler Control is only available as an option in combination with the combiBOIL hot water boiler - please select accordingly when ordering. Note:Autoterm Comfort Control and Autoterm Comfort Boiler Control differ in terms of hardware and software. The standard Comfort Control cannot be updated to the boiler monitoring functions.Goodbye control flapThanks to the possibility of controlling and monitoring the boiler temperature, regulation via a Y-piece / control flap is finally superfluous. Before a critical temperature is reached, the heating can be automatically switched from the current heating mode to ventilation in order to lower the boiler temperature. The rapid cooling achieved in this way enables the heating mode to be restarted before a clearly noticeable reduction in the room temperature occurs.A control damper may still be useful only in the case of extreme temperature requirements (e.g. sub-zero temperatures in the double-digit range with sub-optimal thermal insulation). Couple or large family - as much hot water as you needThe combiBOIL is available in three sizes. With volumes of 7, 9 or 12 liters, it always heats enough hot water, but not unnecessarily much. At a temperature of just under 60 °C in the boiler, 7 liters of water provide enough pleasantly tempered shower water for two people. Use with other heatersIt is not absolutely necessary to use an Autoterm heater to operate the combiBOIL hot water boiler. The hot air flow for hot water production can also be generated by other heaters.In this case, however, the integration of temperature measurement and the corresponding safety functions must be dispensed with, as the use of the Autoterm control panel requires connection to a corresponding heater. A control flap and its manual operation are then a prerequisite for safe operation.

Warm shower kit 2.0 - Autoterm parking heater + combiBOIL with Comfort Boiler Control The original from tigerexped - but now even better! The Warm Shower Kit is the simple way to equip touring vehicles or boats & yachts with a hot air heater and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. How does the Warm Shower Kit 2.0 work:The Warm Shower Kit 2.0 can generate hot water in three different ways: Via an electric heating element, which means via electricity if you have just enough reserves, or are connected to shore power.Simply on the side when the heating is running - without consuming any additional energy. Hot water is the "waste product", so to speak.NEW: The boiler can be integrated into the engine's cooling water circuit to heat either the service water itself or a second water loop. Conversely, the engine can also be preheated to make starting more gentle (not suitable for use in arctic temperature ranges).Each of these three options has its advantages and can be used when it suits best. After a few days of self-sufficient camping in hot weather, for example, you don't want to leave the heating on, nor do you want to heat up the water from driving. However, if it is too warm for the heating, there is probably enough solar power in the batteries to generate hot water via the electric heating element. With the combination of three options, this kit always offers the one that fits perfectly in every situation. The options for integration into the cooling water circuit are as follows: Cooling water circuit heats the service water, i.e. the cooling water circuit is connected to the boiler and heats service water for showers etc. while driving. (Caution: As the temperature of the cooling water can rise above 100°C (due to pressure), the boiler must be prevented from overheating by means of a valve or by switching off the circulation pump).The boiler preheats the cooling water circuit (engine), which means that the above function is reversed. The engine cooling circuit can be preheated by connecting the boiler to a 230V/110V power source or by using hot air from the parking heater.Heating a second water loop, whereby the energy that is fed into the boiler via the electric heating element or hot air is fed into a second water circuit via a circulation pump. It is also possible to combine the two water circuits (so that the cooling water circuit heats the second water loop), although precautions must be taken with regard to the flow temperature from the motor. NEW: Integration of a second water loopWith combiBOIL it is possible to operate a second water loop with hot water. For example, underfloor heating or towel radiators can be implemented to make it easier to dry wet clothes and towels in the vehicle. Please note that an expansion tank must be integrated into the water loop and, depending on the application, the water may need to be circulated by a circulation pump. Scope of delivery:The Warm Shower Kit 2.0 consists of two main components (heater and boiler) and material to connect and install them to create a perfectly functioning system.

Warm shower upgrade kit 2.0 - combiBOIL with Comfort Boiler Control control panel This upgrade kit turns your existing / installed air heater into an integrated complete system for heating and hot water. It contains all the necessary connecting parts between the heater and boiler and all the components you will need to install the system. Since its development by us in 2017, the Warmduscher kit has been the simplest and most popular way of equipping touring vehicles or boats & yachts with hot air heating and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. Warm shower kit 2.0 - UPGRADE 2023The original Warm Shower Kit is now equipped with the combiBOIL hot water boiler. This upgrade makes hot water production even more versatile, convenient and safe. Choose the right one for your projectThe Warmduscher upgrade kit 2.0 is available with the combiBoil hot water boiler in various versions and three sizes. Please note:Especially if your heater is already installed, when selecting the volume, pay attention not only to how much water you want to heat, but also to how much space you really have left in the camper to install the boiler sensibly (it should be installed as straight as possible and not far away from the heater).Your currently selected configuration is displayed in the product title and in the drop-down menu. Scope of delivery: 1x combiBOIL hot water boiler with 7, 9 or 12 l capacity, with stainless steel boiler and heat exchanger, in the variant selected above Comfort Boiler Control control panel 2 x adapters for the hot air connections of the boiler 1x adjustable thermostatic mixing valve / scalding protection 2 x brass hose nozzles 1 x screw-on hose nozzle 2 x T-piece for water pipe 1 x G1/2" steel flex hose for the heat-resistant connection between the boiler and mixer Water hosesIf the water is to be used for drinking or cooking, we strongly recommend that the hoses are certified accordingly. This ensures that no harmful substances are transferred to the drinking water and that the taste and composition are not altered by the material.Drinking water-certified hose lines for hot and cold water are available here. Pressure reducer:The boiler is made of high-quality stainless steel and is precisely manufactured. Nevertheless, the inlet pressure should be limited to 1.5 bar.In all pressurized water systems and systems with submersible pumps with a built-in or separate non-return valve, a pressure reducer should always be used upstream of the boiler and set to 1 to 1.5 bar.You can find pressure reducers with pressure gauges under the following links.A safety valve for releasing excessive pressure no longer needs to be purchased separately with the Warm Shower Kit 2.0. combiBOIL has installed this ex works. Water pump:A decent pump brings the system up to the required pressure and circulates it. It must be powerful enough to ensure a good and even flow even with water filtration and allow the water system to run smoothly. Provided it is durable and repairable. You can get this pump here.