Canister with integrated handle, capacity 1 liter All DIN 96 wide-necked canisters are made of food-safe polyethylene. Your advantagesNot harmful to food and no adverse effect on odor or taste Product description Dimensions (DxWxH): 320 x 170 x 375 mm Capacity: 10 L Material: HDPE (hard polyethylene) - therefore BPA-free Main color white Weight 0.500 kg including screw cap DIN 96 (top) Odorless and tasteless, food-safe Can be emptied completely Can be cleaned inside by hand thanks to large opening Versatile in use Suitable for almost all products Robust 3/4" thread at the bottom, sealed  

Screw cap for plastic - plastic water canister (lid) Lid - ø 50 mm screw cap including seal Ideally suited e.g. for our water canisters and also Frontrunner canisters. Please note: This lid does NOT fit canisters from May 2022 (these have a diameter of 65mm).  

Especially in difficult terrain, when off-roading, camping or on expedition, a solid, clean and flat surface can make all the difference, whether it’s for cooking and eating, doing repairs or simply to spread maps and GPS gadgets to navigate properly. Moreover, our foldable side table offers not only one but two surfaces, like a small shelf. While you’re running a gas stove on top, for example, you can use the lower shelf to prepare your food items, away from dust and dirt. The double table is robust, portable and folds away nicely. When you need it you simply attach it to the stainless steel fittings included in the kit. Removal is just as easy. The fittings can be mounted on the side of your vehicle or the rear door. If you want to keep the folding table permanently attached, use the two screws we’ve included in the kit specifically for that purpose. When driving, the table is simply folded up. The metal structure’s powder coated surface is highly resistant to scratches, abrasion and also to heat. While cooking, you can put warm pots and pans directly onto the table (Attention! Do not put boiling hot pots on the table, this can damage the coating). Additionally, the front edge of the lower shelf is bent upwards so that nothing can fall out when your vehicle is slightly tilted on uneven ground. Weight:3.9 kg Dimensions:folded 64 x 4 x 23.5 cm Color:Black

Practical Nakatanenga grill plate With this grill plate you can enjoy a barbecue 2.0. The usual barbecue feeling with the bonus that you can prepare far more dishes from now on. In principle, every pan dish can be prepared - no matter where you are, in the mountains, in the desert or at the campsite. This is our popular Muurinpohjapannu with upgrade. Basically, Muurinpohjapannu always includes 3 bolt-on steel feet. The steel feet are suitable for cooking on an open fire. However, since you can not grill everywhere with wood and may this grill plate is supplied with 3 additional screw-on feet made of aluminum. With these feet, the plate can also be operated with a gas cooker. For this purpose, the delivery includes mounting clamps for the stove and a windscreen. The aluminum feet are adjustable in two different sizes. The "longer" feet are also a comfortable grilling while standing allows. With the aid of the three fixing clamp, the gas cooker can be fixed to the plate and the windbreak ensures that the gas flame is always well protected. Any commercially available 3-leaf cooker can be used. The grill plate is available in different versions. Please select the desired variant. Variant: grill plate with burner, gas and wind protectionis included in the scope of delivery:- Grill plate- burner- gas cartridge- windbreak, incl. fastening clamps- Aluminium feetVariant: grill plate with windbreakis included in the scope of delivery:- Grill plate- Windbreak, incl. fastening clamps- Feet made of aluminiumVariant: Aluminium feet with windbreak, gas and burneris included in the scope of delivery:- Feet made of aluminium- gas- burner- windbreakThis version is ideal as a supplementary set for all those who already own the grill plate alone and now want to use it with gas!Variant: aluminium feet and windbreakis included in the scope of delivery:- Aluminium feet- Windscreen (incl. fastening clamps)This variant is ideal for those who already own the grill plate, burners and gas!

High quality plastic water cans with 40 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 40 liter plastic water can: Dimensions: 460x335x335 mmPolyethylene (BPA-free / food grade)Scope of supply: 40 liter water canisters made of plastic and hose with spigot You can find a replacement twist cap here.  The cap has a diameter of ø 60 mm since May 2022Previously the diameter was ø 50 mm

Outdoor Shower Tube with Spiral Hose The dust is settling, the light is fading. The hot Diesel engine is happily ticking away as it’s cooling down and all the chores are done. The awning is up, seats and tables unfolded and even the roof tent is ready. That’s the moment when you realize how sweaty and sticky you are from a long day behind the wheel. A kingdom for a shower, in the middle of nowhere! No worries, we’ve been on the case and this is what we‘ve come up with: A mounted shower unit for overlanders, campers and adventurers. Nakatanenga shower tubes are attached to the side of a CargoBear or any other roof rack. You fill it with the amount of water you need, pressurize the tank with air to guarantee consistent water flow and off you go. During the day, the tube’s black PE material provides free solar off-grid heating for the water, no energy input required, no CO2 emissions. Isn’t that just great at the end of a tough day? The shower tubes come in three sizes – 1,240, 2,100 und 2,750 mm – respectively giving you volumes of 9.4, 17.5 and 23.7 l. We deliver the tubes with CargoBear mounting brackets, tap, handheld shower head and spiral hose pipe. You can attach your own accessories to the ½” connector, of course. The shower tubes is a really neat solution for all your muddy outdoor hobbies, too. How often have you wished you could just quickly hose down clothes, boots, sports equipment or pets before getting into the 4x4 or loading it up? We know. Since the tubes are not equipped with safety valves, we recommend using regular bicycle hand or foot pumps to pressurize them. Manually created pressure will be perfectly sufficient to create a constant flow of water. Brackets for other roof racks than the CargoBear have to be ordered separately. Available in:3 different lengthsWithout holder, with holder for roof rack CargoBear, with holder for other roof racksFor the variants with holders: short includes two holders, medium and long includes three holders Please note:The tube should not be filled to the brim.We recommend a maximum pressure of 2 bar / 29 psiThe tube cannot be attached to a slanted CargoBear extension Some individual parts supplied may differ from the pictures! 

High quality plastic water cans with 20 liters and 10 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 20 liter plastic water canister: Dimensions: 350x460x170 mmPolyethylene (BPA-free / food grade)Scope of delivery: 20 liter water canisters made of plastic 10 liter plastic water can: Dimensions: 260x370x140 mmPolyethylene (BPA-free / food grade)Scope of supply: 10 liter water canisters made of plastic The canisters are available in grey and coyote-brown. You can find a replacement twist cap here.  The cap has a diameter of ø 65 mm since May 2022Previously the diameter was ø 50 mm Please note: Based on various customer feedback, it can be assumed that our 20L canister is not compatible with the GMB holder!