Planar 2D Auxiliary Vehicle Heater
€599.00
Prices incl. VAT; / Parcel shipping
Delivery time 5-10 working days
Planar 2D Auxiliary Vehicle Heater
We offer the Planar 2D auxiliary vehicle heater as a well-priced, powerful alternative to our Webasto auxiliary vehicle heater kits. With their compact size and a heater output of 1.8 kW, the Planar 2D is well-suited for fitting to smaller vehicles, vans, off-roaders, camper vans, boats or in confined spaces. It is ideal for 'typical' off-road vehicles like the Land Rover Defender, Mercedes G oder Jeep Wrangler JK. The extensive fitting kit that is supplied with each heater make fitting easy.
The Planar 2D can be easily controlled via its analogous control unit, with 8 settings available from 0,8 - 1,8 kW heat output.
Available as both, 12 volts or 24 volts, this heater is European market approved (ECE label) and can thus be fitted independet of TUV approval.
The parking heater has approval for the European market (ECE test mark) and can therefore be installed without registration. The hole pattern is the same as that of Eberspächer Airtronic and Webasto AirTop 2000 heaters, so that an old unit could easily be replaced without drilling additional holes.
A space-saving version with a 90° angle can be found here.
All Planar auxiliary vehicle heaters are extremely long-lasting and durable, as well as very frugal.
The heater can also be used while driving.
And extensive range of additional equipment is available in our online shop.
Attention Defender drivers: Our extensive Planar full-set for Land Rover Defender not only includes everything needed to perfectly fit the heater to your Tdi, Td5 or Td4 Defender, but also offers considerable savings over the individual purchase of all included items.
Comes with:
- 12 V or 24 V heater
- Optionally analogue PU-5 control panel with rotary control or digital Comfort Control control panel with timer
- Thomas Magnet P327" dosing pump
- Exhaust silencer
- Dosing pump rubber holder
- Dosing pump wiring harness
- Heater wiring harness
- Intake air hose with integrated silencer
- Heat protection hose
- Exhaust pipe end piece + clamp
- Tank intake pipe
- 5.5 m fuel line
- 300 mm fuel line connector
- 1 m corrugated metal exhaust pipe
- Fastening material (screws, nuts, clamps, heat-shrink tubing, cable ties)
- Operating instructions
Technical details:
· fuel: diesel
· heat output: max. 1.8 kw, min. 0.8 kw
· air volume: max. 75 m³/h, min. 34 m³/h
· fuel consumption: max. 0.24 l/h, min. 0.1 l/h
· power drain: max. 29 W, min. 10 W
· manual start/stop
→ On the Autoterm.cz website you will find a calculator for the correct dimensioning of the air heater
The AUTOTERM Luft 2D (Planar 2D) is equipped with a height kit!
This means that the heater automatically reduces the injection quantity according to the ambient air pressure. This reduces or prevents shooting of the combustion chamber when the atmospheric oxygen content drops. The max. Heating power drops in proportion to the amount of oxygen in the air. Roughly one can say: From 2.000 meters the loss of power per 500 m height is approx. 5%. Manufacturer tests up to 3.440 m were no problem. No difficulties are to be expected up to 4.000 m. The software itself calculates up to 5.000 m - however, this has not yet been tested in real height.
The separately available control unit with timer (optional extra) features a larger OLED display and more intuitive operation. Temperature, ventilation and output can be configured via a display and various switches. An added timer clock allows you to set the heater to a specific time. OLED display provides maximum visibility with minimum power drain.
Possible settings:
- temperature and output
- time and date
- language (English or Russian)
Features of the new timer clock:
- daily: one fixed time at which the heater starts each day
- individual: up to thee different settings with different days and times.
To heat your roof tent using your auxiliary heating system, we offer an installation service for a warm air duct through a ventilation plate.
The improved new control unit is also available separately.
https://www.autoterm.com/partners/trusted/nakatanenga-4x4-equipment
Customers also bought
Webasto pipe connector / double socket, with 60 mm connection Warm air pipe connector for effective distribution of warm air. The warm air pipe connector can be used to connect two warm air pipes with each other. Diameter: Ø 60 mmPrice per piece
Prices incl. VAT;
Warm Air Where You Need It: The Highly Flexible 60mm Warm Air Ducting! Are you currently installing your parking heater or optimizing your existing system? Rigid, unwieldy hoses make your life difficult when it comes to directing warm air exactly where it's needed – whether in your camper, off-road vehicle, rooftop tent, or boat. With our highly flexible warm air ducting (inner diameter 60mm), installation becomes child's play! Its enormous flexibility allows you to master even complicated routing and tight radii without any problems. This makes our warm air ducting the first choice: Maximum Flexibility: Can be laid in the tightest installation spaces and around sharp corners without kinking or blocking airflow. This saves time and nerves during installation. Optimal Airflow: Despite its flexibility, the hose ensures good flow for efficient distribution of warm air from your parking heater. Robust Quality: Developed for the demands of a vehicle environment and resistant to the typical temperatures of a parking heater. Universally Suitable: With an inner diameter of 60mm, it is compatible with the connections of many common parking heater models – ideal for the AUTOTERM 2D parking heater, but also for Webasto, Eberspächer, and Truma heaters. As this hot air ducting is particularly flexible, we recommend it for use with our mobile air heater. Sold by the Meter for Your Needs: You order exactly the length you need for your project. This way, you avoid unnecessary waste and save costs. The hose is delivered as one continuous piece in the ordered length. Whether you want to direct the warmth specifically to the footwell, sleeping areas, or a particular area of your vehicle – this hose makes it easy. Notes: Inner diameter: Ø 60 mm Price per linear meter, sold only in whole meters. The pipe is completely waterproof. Example: If you need 3 meters of hot air ducting, add this item to your shopping cart 3 times. Please note: A maximum of 10 meters can be delivered in one piece. If you order, for example, 20 meters, you will receive 2x10 meters. Individual pipe sections can be connected without problems using the pipe connector. You can find a suitable storage bag for the hose here. Put an end to rigid solutions! Order your highly flexible warm air ducting now and enjoy cozy warmth exactly where you want it!
Prices incl. VAT;
Nakatanenga parking heater console 2 New version of the proven parking heater console, it allows the installation of a parking heater (e.g. Webasto Airtop 2000 STC, Eberspächer Aitronic D2 or D11C or AUTOTERM (=Planar 2D12)) under the cubby box of the Land Rover Defender 90/110/130, turning it into an armrest at a comfortable height (158 mm higher). The display of the parking heater is recessed into the front panel of the console.Please note: New holes have to be drilled for the installation of the parking heater console; the required fixing material is included in the scope of delivery.The ever-growing need for power sources in the vehicle cockpit - whether in the classic cigarette lighter format (12 V) or as a 5 V USB socket for Apple iPhones, navigation devices, iPads, smartphones or similar. - the new generation of the Nakatanenga parking heater console now also meets these requirements in the best possible way: it is optionally available with heavy-duty 12 V sockets and/or USB charging sockets from the marine sector. These are then already included in the scope of delivery, so they do not have to be ordered separately. A Webasto air vent can be attached to the cut-out at the rear. In the cut-out for the Planar parking heater, the display is glued on and the cable is fed through the square hole. If none of the front panels contains your desired cut-outs, you can order the front panel without cut-outs and process it accordingly.Basic dimensions: 47.5 cm x 26.5 cm x 15.5 cmATTENTION: An AUTOTERM Air 4D (=Planar 44d) is not recommended for this purpose!
Prices incl. VAT;
Silencer for 60mm hot air hose This warm air silencer reduces the noise of incoming or heated air from the heating system. There are connections for the hot air pipes on both sides. Technical data: Connection dimension 60 mm Length of the silencer 300 mm Overall length 440 mm Silencer diameter 130 mm NOT for combustion air!
Prices incl. VAT;
Installation flange air heater for floors up to 48mm NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!This flange allows the installation of an air heater in floors or walls with up to 48 mm wall thickness. Suitable for the Webasto and Eberspächer D2 parking heater.While an air heater is normally only suitable for installation in thin sheet metal walls or floors, with this flange an insulated floor construction with a wooden panel or directly a sandwich panel up to 48 mm thick can also be used. There is no need to scribe and drill the many different holes for combustion air, flue gas, fuel line and fixings - these are already integrated in the flange and allow the heater to be mounted directly in any direction. Only a rectangular cut-out of approx. 88x130 mm is required.Procedure: Find a suitable flat installation location with max. 48 mm total thickness (e.g. floor panel+insulation+wood panel). Cut a rectangular cut-out 88x130 mm. Insert the installation flange with sealing compound and screw it in place. Insert the heater from the inside into the flange and mount all hoses etc. from the outside.Stainless steel, laser-cut, welded, partially glass-bead blasted.Suitable for AUTOTERM air heaters (=Planar) 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and possibly Webasto.
Prices incl. VAT;
Air vents for individual warm air regulation This vent can be used for all independent vehicle heaters with 60 mm piping, like the Planar 2D auxiliary heater. The vent can not be fitted to our auxiliary heater center console, in which case please use our Webasto vent.
Prices incl. VAT;