Das könnte Sie auch interessieren

Thermal inner tent for Roof Lodge Evolution 2

Thermo tent liner for Roof Lodge Evolution2 140 and 165 roof tent

There’s one golden rule when it comes to insulation: layer up. Everbody knows this from sport and outdoor clothes but it also applies to tents. And since a bear wears a thicker coat in winter, we adapted the idea for our roof tents with the bear logo, Evo II and Lightweight, and created an inner thermo-layer that is practical and easy to set up. There’s no excuse any more not to go winter-camping in one of our Roof Lodges. Our thermal tent liner for Roof Lodges Evo II and Lightweight takes its cue from old nomad wisdom: the tent inside the tent immediately creates more warmth and a much better climate. Just like inside a mongol yurt, we are simply applying a perfectly fitting, insulating and breathing second layer to the roof and the walls. It reduces thermal radiation loss and gives you a much more even temperature distribution throughout the day. Fitting it is really easy, too. The quilted material with its three layers – polyester on the outside and thermal fleece in between – is simply clipped onto the tentpoles and tied down to the mattress by sewn-in straps. Apart from preserving warmth, the quickly fitted inner liner tent also reduces condensation build-up. And since ventilation is of utmost importance in that context, the liner also features air vents that perfectly match the windows in the outer tent walls. Same as with the entrance flap, the ventilation windows are opened and closed by robust, durable YKK zippers. Last but not least, the thermal material also reduces outside noise by a hefty 35 dB. Use our thermo-liner tent for a significantly warmer, dryer and quieter camping experience in your Roof Lodge. It’ll make even winter camping much cozier. The roof tent can still be closed with the inner tent attached. Material: polyester micro fibers, thermal fleeceZippers: YKK Sizes: 140165 Note: The thermal inner tent can be washed at 30° gentle cycle.

Product number: RLEVO2-TIZ-165M

Weight: 3,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €189.00*

Select version

Roof Lodge EVOLUTION 2 ladder extension

Suitable for Roof Lodge roof tents with pull-out ladder from year of construction 2019 Rung width: 30 cm Please note:We have two different ladder extensions. On the basis of the black cap you can check which is the appropriate extension. Please check the pictures and compare with your ladder. If this ladder extension does not fit, you will find the suitable extension here.

Product number: LADDEREXT-EVO2

Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€49.00*

Leveling feet for roof tent ladder

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag

Product number: AUSGLDALE

Weight: 1,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€39.00*

Repair Kit für roof tent skin

The protective hoods of roof tents usually have to take a lot during the season. The exposed position of the tents makes this almost inevitable. If the hood is damaged, foxing threatens the tent very quickly. For some, then Gaffa tape is the tried and tested medium of choice. Often enough for the rest of the journey. The consequences of a minimal leaking hood are not immediately visible or smelling! To prevent a nasty surprise in the spring, there is now our repair kit for PVC protective hoods. Material and tools are especially designed for larger repairs. Delivery: 2x brushes 1x 50 ml glue 1x PVC material 48x48cm Manual: Cut the patches and round off the corners. Clean the areas to be bonded (warm soapy water or degreasing detergent) After drying for 10-15 minutes, the glue can be applied to both sides with a brush. (Attention: do not apply too much and above all apply evenly) Let the adhesive surfaces dry again for 10-15 minutes so that the solvents can escape. Touch the glue - if it is dry, you can continue. Place the patches precisely and press firmly. Experts use a roller here. Similar tools like a bottle or rolling pin works too. Important here is the exact positioning, since a later adjustment of the patches is no longer possible. Also, the force that is applied to push the tarpaulin later decides the strength of the adhesive surface. Dry overnight and let air dry for long-term maintenance.

Product number: REPSETDZH-BLKM

Weight: 3,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €19.00*

Select version

RoofLodge Ladder

Product information Ladder can be used as a spare part for our ROOFLODGE EVOLUTION folding tents. Rung width: 30 cmLadder dimensions: retracted 1.2 m / extended 2.15 m Here you will find a matching ladder extension - for up to a further 45 cm. Please note that for older Roof Lodge Evolution folding tent models, the ladder bracket must be remounted on the base plate of the roof tent.

Product number: RLEVO2-LADDER

Weight: 4,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€149.00*

Cover for roof tents roof lodge evolution 2

Roof tent accessories - roof tent hood A roof tent hood as a spare part in the color black - suitable for all Roof Lodge Evolution 1 and 2 (140 and 165 - Basic and Extended) and Roof Lodge Lightweight. The roof tent hood is also suitable for roof tents from other manufacturers with the same dimensions. The picture is for illustration purposes only, we reserve the right to make technical changes.

Product number: RLEVO2-ABEH-140-BLKM

Weight: 6,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €169.00*

Select version

Roof tent adapter plate set for a crossbar

Name: Roof tent adapter plate set for a crossbar
Brand: Nakatanenga
SKU: RTTR-DTADP-2
Price: 59.0 EUR
Availability: InStock

€59.00*

Content: 2 Piece

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ Adapter plate set for a crossbar ✔️ for attaching the roof tent ✔️ easy assembly ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Set

Product number: RTTR-DTADP-2

Weight: 1.5 kg

Adapter set for mounting the roof tent

If the attachment points of the roof tent are directly on the feet of the roof racks, the adapter set offsets the attachment points and the roof tent can be mounted easily and safely.

Scope of delivery:

2 pcs adapter plates
2 pcs counter plates
Screws

Note:
Sliding blocks and sliding plates are NOT included in the scope of delivery! Are only for better understanding shown in the pictures!
The adapter plates are only suitable for beams where the beam foot does not include the crossbar.
The carrier feet must NOT be machined in any case!

Jeep Ausrüstung: für Individualisten!

Jeep Zubehör: perfekt ausgerüstet!

Jeep Ersatzteile, Umbauten und Zubehör

Roof tent adapter plate set for a crossbar

Adapter set for mounting the roof tent