Accessories Evolution Series

EXTENSION STRIPS for Evolution 2 Ground Tent Extended, stone grey EVOLUTION Series II Extended ground tents are designed for a tent mounting height of up to 210 cm (Extended 165) or 200 cm (Extended 140). If the roof tent is mounted at a greater height, then an extension strip should be used for this ground tent to compensate for the missing difference. The extension strip is simply zipped in between the floor pan and the underside of the tent side walls and compensates for a net difference of 10 cm. Of course, the zip added in this way is protected from direct rain by a tarpaulin.

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Cozy, Warm, and Dry – Your Upgrade for Cool Nights in the Roof Lodge Evolution 2! Do you love adventuring with your Roof Lodge Evolution 2 roof tent but don't want to sacrifice comfort in cooler temperatures or on damp nights? Then our thermo inner tent is just the thing for you! More Warmth, Less Condensation – It's That Simple: The principle is as simple as it is ingenious: just like with proven outdoor clothing, we rely on the layering principle. The additional inner tent creates an insulating air layer and noticeably improves the climate inside your roof tent. Pleasant Warmth: The quilted three-layer material, with polyester fibers on the outside and thermal fleece on the inside, retains heat much more effectively in the tent. This makes even cold nights comfortably warm. Reduced Condensation: The extra layer helps to minimize the formation of condensation inside your roof tent, ensuring a more pleasant and drier sleeping environment. Easy Installation: The inner tent is a perfect fit for your Roof Lodge Evolution 2 (available for widths 140cm and 165cm) and can be easily attached to the tent poles with clips and to the mattress with straps. Practical Details: The ventilation openings of the inner tent are aligned with the windows of the outer tent and, together with the robust YKK zippers, ensure good ventilation options. Additional Sound Insulation: As a pleasant side effect, the material also dampens external noise, ensuring a quieter night. Convenient: Your roof tent can be closed even with the thermo inner tent attached. Make your Roof Lodge Evolution 2 even cozier with the thermo inner tent and extend your camping season! Get your upgrade now for maximum sleeping comfort, no matter where your next adventure takes you. Note: The thermo inner tent is washable at 30°C on a gentle cycle.   Is the Nakatanenga thermal inner tent for Evolution 2 compatible with other roof tents? The answer to this question can only be a resounding yes and no:   As you can clearly see, there are areas where the inner tent is slightly too large and there are areas where it is a little too short. This leads to it being raised at the sides and sagging slightly on the longitudinal axis. The fit is therefore not optimal for tents from other manufacturers, but we are talking about deviations in the order of just under 3cm (depending on the actual height of the poles). To avoid any misunderstandings: The thermal inner tent does NOT have a floor, even if the above illustration might give this impression. However, it is fixed with elasticated straps under the corners of the mattress.  

Since the extended stirrup now has a curved shape, it is best to store it with the new joints without protruding. With the joints, the lower part of the extended bracket can simply be folded in and stowed away without any problems. Instructions for attaching the joints can be found in our downloads.

Suitable for Roof Lodge roof tents with pull-out ladder from year of construction 2019 Rung width: 30 cm Please note:We have two different ladder extensions. On the basis of the black cap you can check which is the appropriate extension. Please check the pictures and compare with your ladder. If this ladder extension does not fit, you will find the suitable extension here.

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag

Product information Ladder can be used as a spare part for our ROOFLODGE EVOLUTION folding tents. Rung width: 30 cmLadder dimensions: retracted 1.2 m / extended 2.15 m Here you will find a matching ladder extension - for up to a further 45 cm. Please note that for older Roof Lodge Evolution folding tent models, the ladder bracket must be remounted on the base plate of the roof tent.