Nakatanenga Evolution 270° awning, incl. two side panels, stone-grey On long journeys, camping holidays or a quick trip to the lake, the 270° roof awning from Roof Lodge turns every Landy, T5 & Co into a practical and, above all, quickly opened camp. Once you have found the perfect spot for the night or even the whole holiday, the awning fans out in no time at all from the left-hand side of the vehicle to far behind the rear of the vehicle, is then supported by four aluminium telescopic poles and tensioned with the ropes. With the help of flexible side wall tarpaulins that can be quickly attached, an optimal combination of weather protection and openness can be created. Two side panels are included. This creates an adaptable, dry, wind-protected and shaded area for cooking, eating, working and relaxing. The material of the awning is high-quality, PU-coated RipStop polycotton, a blend of 65% polyester and 35% cotton. The functional fabric is extremely tear-resistant, water- and dirt-repellent and, due to its relatively high weight of 280 g/m2, also produces significantly less fluttering noise in the wind. Our Roof Lodge awning, which weighs 16.8 kg (incl. side panels), can be mounted on the right and left of the vehicle's roof rack, making it ideal for covering crucial areas such as the driver's, passenger's, side and rear doors, depending on the vehicle model and size. The awning measures 4.35m in total length and covers 4.1m at the side and 2m at the rear (see drawing in the product images). The area of the awning covers approx. 9 sqm ². The awning is secured at the rear with the included tensioning strap set. Two 25 mm wide nylon straps in three different lengths (25, 75 and 125 cm) guarantee stable lashing even with the most varied vehicle/roof rack configurations. Enjoy all-round freedom - certainly 270° of it - with the Roof Lodge awning from Nakatanenga. The maximum mounting height of the awning is about 2.20 meters. Available for either the right or left side Please note: This item is bulky goods. The stated shipping weight differs from the actual item weight. The actual item weights are: 270° awning: 14.4 kgSide parts (2 pcs.): 2,4kg Fixing material (screws, brackets, etc.) is included in the delivery and there are recesses on the aluminium rail for fixing. This can be used to attach the awning to the existing crossbar (min. 2 pcs!) or to the existing roof rack.  

CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

The Roof Lodge Evolution 2 - roof tent extended You are gently awakened by the sun's rays coming in through the rainproof skylight. You slept well, thanks to the comfortable mattress and the 3D mattress pad underneath. You look around - there is enough space, no mosquitoes or other bugs buzzing around. You open the entrance and get your shoes out of the net attached to the floor of the tent to climb down the ladder. This is your adventure, this is where you want to be! For how long? - That's up to you. Your vehicle will take you anywhere and with the Roof Lodge Evolution 2 rooftop tent you have all the freedom to stay or travel on! Your trip, your experiences, your freedom - no one can take that away from you! For shipping reasons, the stated shipping weight differs from the actual weight. You are not sure whether a roof tent can be mounted on your vehicle? We are happy to support and advise you! So far we have found the perfect solution for almost every vehicle.Just contact us at: 09181 / 466 644 or write us. Roof Lodge Evolution 2 - 140 / 165 Extended  The equipment at a glance Tent skin: 320 g/sqm polycotton, PU-coated; the darker fabric of the tent skin allows a restful sleep even in the morning hoursSun sail: 280 gsm polycotton, metal-coated; due to the comparatively heavy quality, significantly less fluttering noise2 roof windows with rain and mosquito protectionOutward curved poles for better water drainageGround tent made of 280 g/sqm polycotton, metal coated - 165: adaptable to a tent mounting height of approx. 170 cm to 210 cm- floor area approx. 180 cm x 200 cm- 140: tent mounting height of approx. 200cm- floor area approx. 160 cm x 200 cm- floor pan made of PVC fabric- Stable protective cover made of PVC fabric (similar to truck tarpaulin)- 4 side walls; window and entrance door with close-meshed mosquito net Thermoplastic honeycomb floor; German brand productone-piece mattress (60 mm thick); available in two hardnesses; manufacturer: Saar-Schaum, Germany- standard mattress: recommended for persons up to 100 kg or those who like to lie softly- hard mattress: recommended for persons over 100 kg or those who like to lie hard3D mattress base (10 mm thick) for restful sleep; the base prevents condensation.fine-mesh mosquito protection on all windows and the entrance Additionally included with the tent: Aluminum ladder for a mounting height of the tent up to 2 meters incl. Nakatanenga compensating feet; adaptable to the vehicle height (and extendable with an optionally available ladder extension)Stable protective cover made of PVC fabric (similar to truck tarpaulin)LED tent lighting2x Nakatanenga travel pillows6x spring steel polesMounting material and required toolsThe supplied mounting material is used to mount the tent on standard crossbars with a width of up to 120 mm. If you have a different mounting situation, please contact us - we will be happy to provide you with alternative mounting options.pre-drilled mounting rails, which can be shortened according to the mounting situation (for details please refer to the enclosed detailed mounting and maintenance instructions)Roof tent net for shoes and small items (mounted on the front underside of the honeycomb floor). Features: Lying surface: 140 cm x 240 cm (140) / 165 cm x 240 cm (165) ; Height: approx. 120 cmPacking size: 143x124x40 cm (140) / 168x124x40 cm (165)The height of the folded tent is about 45 cm. This measurement is composed of the height of the mounting rails, the height of the folded tent and the height of the ladder lying on the tent. The ladder can be dismantled if necessary (keyword ferry).Can be mounted on off-road vehicles and also passenger carsMaterial: 65% polyester / 35% cotton (tent skin, sun sail & ground tent)Material: 100% cotton (mattress cover) And by the way: Since we naturally apply only the highest standards of material and workmanship to our own Nakatanenga roof tents, they have been manufactured only in-house for many years. As a result, absolutely every step in the process goes through additional quality control. Every tent that is marked with green delivery status in the store can also be picked up from us at short notice by appointment.  

Another day is done, be it on the road or outdoors, and you’re looking forward to your cozy sleeping bag either classically in a tent or in your RoofLodge on top of the car. Especially when it’s wet and windy, one thing is of utmost importance for your comfort: shoes have to stay outside! Who wants to have dirt, wet and smell in your sleeping quarters? And just so that you don’t find your shoes in the morning wetter than before, we have a perfect Nakatanenga boot bag for you so that you can keep your stuff clean and dry within reach from the tent. No more plastic bags for you! Our bootbag can be inserted into keder rails and that’s why it is perfect for roof tents. There are two D-hooks as well, so that you can hang the bag from virtually anywhere in the camp or the car: ropes, poles and much more. The bag is big enough to take a lot more than just sneakers, crocs or flipflops. Hiking or biker boots are no problem. A sewn-in elastic cord with a toggle and a big flap with a click fastener make sure that this bag, in contrast to others on the market, can be properly closed. Rain, dirt or nosey animals are kept out for sure. The bottom of the bag features a mesh insert for good ventilation and draining of moisture. Who wants to step into wet and clammy boots first thing in the morning? The robust Nakatanenga shoe bags are available in the colour grey coyote. Material gray-coyote: nylon PU-coated

Montagepauschale für die Nakatanenga Roof Lodge Dachzelte in unserem Hause. Wahlweise mit oder ohne Einweisung (wählen Sie bei der Bestellung bitte die passende Variante aus) Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.

EXTENSION STRIPS for Evolution 2 Ground Tent Extended, stone grey EVOLUTION Series II Extended ground tents are designed for a tent mounting height of up to 210 cm (Extended 165) or 200 cm (Extended 140). If the roof tent is mounted at a greater height, then an extension strip should be used for this ground tent to compensate for the missing difference. The extension strip is simply zipped in between the floor pan and the underside of the tent side walls and compensates for a net difference of 10 cm. Of course, the zip added in this way is protected from direct rain by a tarpaulin.

You're woken up by the rays of the morning sun shining through the rain-proof roof-top window. You've slept well thanks to the comfortable mattress and the 3D mesh underneath. You're having a look around - there is plenty of space, no mosquitos or other insect that are flying around. You open the entrance and get your shoes out of the separate storage net to begin your descent.  That's your adventure. That's exactly where you want to be! For how long? That's up to you. Your vehicle gets you everywhere and the Nakatanenga Roof Lodge Evolution roof tent gives you all the freedom to stay or to travel onwards! Roof Lodge Evolution 140 Basic Features tent outer fabric: 320 g/sqm Polycotton, PU coated; the darker fabric allows for long sleep through the morning hours awning: 190T nylon fabric, nomad, PU coated; the relatively heavy weight minimizes fluttering noise 2 roof windows with rain and mosquito protection ground tent: - adjustable for tent mounting heights from about 170 cm to 210 cm- base area: 140 cm x 120 cm- floor pan PVC fabric- durable cover made of PVC fabric (similar to lorry canvas covers)- 4 side skirts; window and entrance with close-mesh fly sheeting- the lighter fabric allows outside light to enter the awning thermoplast honeycomb floor; made in Germany once-piece matress (60mm thickness); available in two degrees of hardness, manufacturer: Saar-Schaum, Germany separate 3D base mesh (10mm thickness) for relaxing sleep; the mat prevents condensation close mesh mosquito fly sheeting on all windows and entry  Additionally supplied with: aluminium ladder for a tent mounting height up to 2 metres, adjustable to vehicle height (optional extension available) hard-wearing protective cover made of PVC fabric (similar to lorry canvas covers) 2x LED interior light 2 Nakatanenga travel cushions 8 flexible steel poles fitting material and necessary toolsThe supplied fitting material allows fitting to standard roof bars with a width of up to 45mm. Should you plan to fit differently please contact us in advance - we can help you with alternative fitting scenarios. pre-drilled mounting rails, to be cut to length according to your requirements (instructions in the supplied fitting instructions) Size and Weight sleeping size: 140 cm x 240 cm ; height approx. 120 cm pack size: 147x124x40 cmThe height of the folded tent is about 45 cm, being the sum of the mounting rails, height of the folded tend and the height of the ladder that rests on top of the folded tent. The ladder can be detached from the tent (e.g. when overall height is important like on ferries, etc. weight of tent: 45 kg (incl. protective cover, ladder, mounting rails) can be fitted to vehicles (also passenger cars) with a mounting height up to 2.10 m Information on the subject of roof loads can be found in the manuel / data sheet tab.  

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Sense and purpose of an awning compact extension? Glare protection when the sun is low in the skyThe compact extension was developed directly from practical requirements - a nice formulation that in itself means nothing more than: "We were so annoyed and dazzled by the low sun one fine day that we wanted to remedy the situation." And already the initial question is actually fully answered. But that would only be half the truth. On the following picture you can see an awning without extension shown above: As the sun sinks (the same applies in the morning, of course - but for the sake of clarity we will limit ourselves here to the afternoon or evening situation), the light falls further and further under the awning. At a certain position of the sun, the light/shadow dividing line reaches the eye level of a seated person - from now on, the sun can dazzle until it sets. The illustration below shows an awning with a compact extension, which offers several advantages with its angled bracing: When the sun is high, a much larger area is shaded.Only when the sun is setting, the light/shadow dividing line reaches the eye level of a seated person. Here, of course, deviations are possible, since both the slope of the guy, the size of the person and his sitting position are influencing factors.But the most important thing is: You can see what's going on in your surroundings despite the glare shield! If the eyes and the lower edge of the compact extension are on a horizontal plane, then the view would extend exactly to the (ideal) horizon. If you compare that with a moderately braced complete front part, where the view is just between a few centimetres to a few steps - what a difference! What if the sun comes in from the side?Well, then the vehicle will probably have to be moved. But not with our new compact extension. All you have to do is unhinge it from the front, and you can attach it to the side in just a few easy steps. Voilà!But please note: The awnings have a uniform depth of two meters, but differ in their widths. Ideally it hit here all those who have a 200er awning. Owners of a 250 have three options: They simply allow the extension to protrude when used from the side - utility over beauty.You opt for a 200 compact extension - this does not detract from the function.You buy two compact extensions at once - a 250 for the front and a 200 for the side. Feel free to guess what we recommend ;-) Material:Made from our sun sail and awning fabric, a 280 gsm RipStop Polycotton (65% polyester / 35% cotton), metal coated on one side; water and dirt repellent impregnated;due to the comparatively heavy quality, significantly less flutter. Colour: stone grey (taupe)  Our compact extensions are also suitable for use on the awnings of most other manufacturers. The only requirement is a free keder strip in the front profile of the awning or such must be retrofitted.  

Front parts for our awnings series Evolution 2 ... are also suitable for the awnings of other manufacturers - the aluminum front profile must only be equipped with a free keder profile for this purpose or one must be retrofitted. Front parts fulfill - especially in combination with our awning side parts - various functions: They are an excellent windbreak - this is where the relatively heavy fabric (280g/m² PU-coated RipStop polycotton - our stone-grey sun sail and awning fabric) comes into play, which is characterized, among other things, by the significantly reduced fluttering noise.They are the ideal rain protection - for this purpose, our sun sail and awning fabric is metal-coated on one side (inside) and water- and dirt-repellent due to the impregnation of the other side (outside).They can be tensioned or also displayed by means of optionally available telescopic poles and thus increase the shaded area immensely. Because of the small and in itself not worth mentioning packing size, our awning front parts as well as our awning side parts belong to these small things with the enormous benefit. If the awning protects from the evening and night chill from above, these awning extensions again significantly increase the comfort. The inside metal coating - primarily the wetness barrier layer - naturally contributes its part to this, reflecting not only the light of a lamp that is probably present, but also to a certain extent emitted thermal radiation (this effect is minor, but quite noticeable). Material:65% polyester / 35% cotton

There’s one golden rule when it comes to insulation: layer up. Everbody knows this from sport and outdoor clothes but it also applies to tents. And since a bear wears a thicker coat in winter, we adapted the idea for our roof tents with the bear logo, Evo II and Lightweight, and created an inner thermo-layer that is practical and easy to set up. There’s no excuse any more not to go winter-camping in one of our Roof Lodges. Our thermal tent liner for Roof Lodges Evo II and Lightweight takes its cue from old nomad wisdom: the tent inside the tent immediately creates more warmth and a much better climate. Just like inside a mongol yurt, we are simply applying a perfectly fitting, insulating and breathing second layer to the roof and the walls. It reduces thermal radiation loss and gives you a much more even temperature distribution throughout the day. Fitting it is really easy, too. The quilted material with its three layers – polyester on the outside and thermal fleece in between – is simply clipped onto the tentpoles and tied down to the mattress by sewn-in straps. Apart from preserving warmth, the quickly fitted inner liner tent also reduces condensation build-up. And since ventilation is of utmost importance in that context, the liner also features air vents that perfectly match the windows in the outer tent walls. Same as with the entrance flap, the ventilation windows are opened and closed by robust, durable YKK zippers. Last but not least, the thermal material also reduces outside noise by a hefty 35 dB. Use our thermo-liner tent for a significantly warmer, dryer and quieter camping experience in your Roof Lodge. It’ll make even winter camping much cozier. The roof tent can still be closed with the inner tent attached. Material: polyester micro fibers, thermal fleeceZippers: YKK Sizes: 140165 Note: The thermal inner tent can be washed at 30° gentle cycle. 

Roof Lodge Lightweight 140 Basic roof tent - the complete package This offer already includes all the accessories that make travelling with a car roof tent even more comfortable. Just decide on a mattress and the optional awning.   The following accessories are already included in this complete roof tent set: 3D mesh mattress underlay (10mm; optional with our Saar foam mattresses) - the icing on the cake when it comes to sleeping comfort in the roof tent. This underlay also prevents condensation, which is typical of roof tents with closed windows. Ladder levelling feet - a secure stand of the ladder, independent of the ground, helps to avoid damage to the roof tent. Stowage net - for all the things you prefer to stow away outside the roof tent. LED tent lighting The LIGHTWEIGHT roof tent - the technical components: >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> Tent skin and awning: 102 g/sqm technical RipStop nylon, Oxford weave, PU-coated outwardly curved 25mm aluminium poles ensure noticeably higher stability of the roof tent and better water drainage Thermoplastic honeycomb floor; German brand product 2 "lockable" roof windows with mosquito protection fine-mesh mosquito protection on all windows and the entrance Aluminium sliding ladder Choose a mattress: one-piece mattress (60mm thick; also available with optional 3D mesh mattress base); available in two hardnesses; specially developed by Saar-Schaum (Germany) for use in folding tents. standard mattress: recommended for persons up to 100 kg or those who like to lie softer hard mattress: recommended for people over 100 kg or those who like to lie harder Self-inflating mattress Also available: our optional awning Sidewalls: 102 g/sqm technical RipStop nylon, Oxford weave, PU coated. Height awning/annex room 200cm Footprint 140 cm x 130 cm 4 side walls that can be rolled up or opened out independently of each other; the side walls can be joined by means of the zips and you get a 5-sided enclosed space the lighter fabric lets a pleasant amount of light into the awning Product description Light Roof Tent LIGHTWEIGHT Why and for whom a Roof Lodge LIGHTWEIGHT roof tent? For car campers and roof tent enthusiasts, roof loads are often a (ge)important issue. If you take it lightly, you risk roof damage. But away from the play on words and towards the bare figures, because the trend is clear: the average dynamic roof loads of vehicles are falling. While the G-Class with 200 kg and the new Defender with up to 168 kg are still solid values, things go downhill pretty quickly after that. Even a new Land Cruiser J150 Prado only manages 80 kilos, and in the normal passenger car segment the average is closer to 60 kilos, with a downward trend. In addition to changes in vehicle statics due to lightweight construction and electrification, the increased use of sensors and assistance systems is probably responsible for this. And even if the values for a stationary vehicle are of course considerably higher, the critical range for commercially available roof tents is approaching. At Nakatanenga, we are reacting to this development at an early stage and have therefore developed the Roof Lodge Lightweight, an ultra-light roof tent which, with a total weight of only approx. 46 kg, weighs a record low on the scales or the car roof. Of course, there are no restrictions on the space, comfort and weather protection you are used to from our Roof Lodges. How does it work? What is the difference between the LIGHTWEIGHT roof tent and our EVOLUTION 2 folding tents? >>> Detailed explanations and a description of the points listed below can be found on our info page, which opens in a new window. >>> First of all, we use 100% Oxford nylon with ripstop for the skin of the Lightweight, an extremely strong but surprisingly light material that weighs in at only 102 g/m2. Compared to the 320 g/m2 on our Evolution 2, this is a reduction of a whopping 78%. The fabric of the tent skin and the sun awning of the Lightweight are identical, PU-coated on the inside and impregnated on the outside. This means that no compromises are made in terms of wind and rain protection. How can weight be saved on the roof when travelling with the roof tent? Further weight can be saved on the Roof Lodge Lightweight by choosing the mattresses. As an alternative to our one-piece standard foam mattress (60 mm, approx. 5 kg) and the optional 3D mesh mattress (approx. 3.5 kg), we also offer a self-inflating Kampa mattress with a thickness of 10 cm and a weight of approx. 5.5 kg. The 10 cm thickness of the air mattress has been chosen so that, with a lower total weight, a comparable lying comfort and similar insulation properties to the combination of foam mattress with mesh underlay are given. Last but not least, the aluminium ladder can be removed and transported inside the car, which reduces both the roof load and the overall height of the vehicle. On car ferries, for example, 10 cm less height can often make a money-saving difference. Anyone who would like to go on a road trip with their own roof tent in times of limited contact, but does not have heavy four-wheel drive vehicles and would like to experience this adventurous way of travelling in the best sense of the word with station wagons, SUVs and even smaller cars up to hatchbacks, will be delighted with the Roof Lodge Lightweight. This item is bulky goods. The stated shipping weight differs from the actual item weight. The actual item weights are: Roof Lodge Lightweight with self-inflating mattress: approx. 47 kg. Roof Lodge Lightweight with standard mattress: approx 49 kg Roof Lodge Lightweight with standard mattress and 3D mesh underlay: approx. 52 kg Save weight during the journey and stow the following items inside the vehicle: Ladder: approx. 4.3 kg Self-inflating mattress: 5,2 kg Saar foam mattress: 5 kg (standard) and 7kg (hard) Saar foam mattress with 3D mesh underlay: 8kg and 10kg respectively  

Sensationally cheap These are the same material as our mattress pads for the roof tents. This so-called spacer fabric is optimally suited for ventilating mattresses and is therefore particularly well suited to where the air has to circulate. The 1 million upright PE threads per square meter also guarantee excellent load distribution. The 3D fabric adapts perfectly, which significantly increases comfort. Due to the cushioning and cushioning effect, the material is ideally suited for conversions on mobile homes and the like. Thickness: 10 mmWidth: 26 cm / 30 cm - please choose the desired versionLength: 1 meter - a maximum of 5 meters is possible in one pieceMaterial: 100% polyester Note: The 3D mesh can be cut with any good household pair of scissors, and can also be easily sewn into larger surfaces by hand or sewing machine with a strong thread. Normally you will get up to 5 m at a time. For special blank requests, please contact us in advance (meter by meter). The 3D mesh material is available in 26 cm and 30 cm width - delivery in whole meters. 9€ / m²

Roof tent accessories - roof tent hood A roof tent hood as a spare part in the color black - suitable for all Roof Lodge Evolution 1 and 2 (140 and 165 - Basic and Extended) and Roof Lodge Lightweight. The roof tent hood is also suitable for roof tents from other manufacturers with the same dimensions. The picture is for illustration purposes only, we reserve the right to make technical changes.

Roof Lodge Evolution 2 Awning / Blind 200 / 250 / 300cm The new Evolution awning is the perfect travel companion. The large, sturdy awning offers ideal sun and rain protection and helps to keep rising warmth in the evenings. The practical ground rail allows fitting to a number of common roof racks. The awnings are available in widths of 140, 200, 250 cm to fit e.g. a Land Rover Defender 110. The extended length of the awning is always 200 cm regardless of width. The awning is made of PU coated rip-stop Polycotton fabric (a mixture of 65% polyester and 35% cotton), which has excellent water and dirt repellent properties while also being very durable and shape-retaining. Lightweight aluminium telescopic poles help to tighten the awning and set the correct height. The poles can be extended up to 220 cm. The awning is supplied with 2 pegs, 2 cords, 2 L-shaped mounts, 4 8x20 mm steel screws, 2 8x20 mm bolts and a spanner. A pack sack is supplied, which remains on the vehicle together with the rolled up awning. This item is sent as bulk goods. The total delivery weight differs from the actual item weight. The actual weight is: awning 200 cm: 10 kgawning 250 cm: 10.6 kgawning 300 cm: 12 kg surface: 200 x 200/250 cm awning material: 280 g/sqm RipStop Polycotton (65% polyester and 35% cotton), PU coated; water and dirt repellent; resistant to wind noise because of heavy quality colour: stone greyPlease choose the desired width. You can also order an additional extension in the same width. The extension is made from the same high-quality material than the awning itself and gives ideal sun, side and wind protection. The extension is simply fitted to the existing weld track / c-profile of the awning. The extension is secured to the ground with supplied pegs and cords. Awning 200 cm with extension: 11.7 kgAwning 250 cm with extension: 12.4 kg Attention: The extension cannot be fitted at the same time as the ground tent for the awning as it uses the same weld track.

The protective hoods of roof tents usually have to take a lot during the season. The exposed position of the tents makes this almost inevitable. If the hood is damaged, foxing threatens the tent very quickly. For some, then Gaffa tape is the tried and tested medium of choice. Often enough for the rest of the journey. The consequences of a minimal leaking hood are not immediately visible or smelling! To prevent a nasty surprise in the spring, there is now our repair kit for PVC protective hoods. Material and tools are especially designed for larger repairs. Delivery: 2x brushes 1x 50 ml glue 1x PVC material 48x48cm Manual: Cut the patches and round off the corners. Clean the areas to be bonded (warm soapy water or degreasing detergent) After drying for 10-15 minutes, the glue can be applied to both sides with a brush. (Attention: do not apply too much and above all apply evenly) Let the adhesive surfaces dry again for 10-15 minutes so that the solvents can escape. Touch the glue - if it is dry, you can continue. Place the patches precisely and press firmly. Experts use a roller here. Similar tools like a bottle or rolling pin works too. Important here is the exact positioning, since a later adjustment of the patches is no longer possible. Also, the force that is applied to push the tarpaulin later decides the strength of the adhesive surface. Dry overnight and let air dry for long-term maintenance.

Extension strip for Evolution front and bottom tents The front and bottom tents of the EVOLUTION series are designed for a tent mounting height of up to 210 cm. If the roof tent is mounted at a higher height, then an extension strip should be used for these front or bottom tents, which compensates for the missing difference. The extension strip is simply zipped between the bottom pan and the underside of the tent sidewalls and compensates for a net difference of 20 cm. Of course, the zipper thus added is protected by a tarpaulin from direct rain. Please note:The awning (Basic) and floor tent (Extended) look very similar, so we ask you to measure the lower circumference of your tent, where the extension strip is used. Please give us the dimensions of the scope by phone before placing your order, so we can ensure that you receive the right extension strip. Tel .: 0049 9181/466644 Thank you very much.

Foam mattress for your roof tent The mattress is available in sizes 140 cm x 240 cm x 6 cm and 165 cm x 240 cm x 6 cm. The delivery takes place WITHOUT mattress cover! Material:The mattress is made of foam with a sub-cover made of 100% cotton. Annotation:The hard version is basically suitable from about 100 kg. Please note that the feeling is subjective and the hard variant may still be too hard for you. Also this mattress is: "Made in Germany" Please select the appropriate width. Please note: For hygienic reasons, this item is generally excluded from return.

Mosquito net as awning for Nakatanenga Awning (or other awnings with the same dimensions) This mosquito net, which is exactly adapted to the dimensions of the Nakatanenga Awning, serves as a pleasant protection against annoying - and possibly also dangerous - mosquitoes. If you close all four outer sides, the mosquito net allows you to comfortably "sit outside" without restricting the air circulation - and the pests have to stay outside! Not only useful in the tropics, Scandinavian holidays in summer are also much more pleasant with fewer mosquito bites. The mosquito net has a ceiling surface that is connected to the 4 side panels without gaps. With this mosquito net awning you stay free of bites & itches and thus ensure a pleasant holiday feeling!

he 3D mattress pads are ideal for roof tents and other applications. These so-called spacer fabrics are ideally suited for rear ventilation of mattresses in roof tents, campers and on yachts. "Floating like on clouds" takes on a new meaning with these high-distance structures. The mat is placed between the mattress and the attic tent floor and contributes to a healthy and restful sleep thanks to its climate regulation. The mattress pads have matching cutouts for the tent poles on both sides. Thickness: 10 mmWidth: ideal for our Roof Lodge roof tents 140/165 and for other 140 cm and 165 cm wide roof tentsLength: 230 cmMaterial: 100% polyester Note: If necessary, the documents can be cut with any good household scissors. The optimal ventilation of the mattress base made of 3D fabric works like an invisible air conditioning system. Around 1 million upright PE threads per square meter allow moisture to escape ideally before it leads to waterlogging, mold stains or the formation of mold. Due to the excellent air and load distribution of the 3D fabric, the mattress base adapts to every contour, which significantly increases comfort. Please select the appropriate width.  

Roof Lodge Car Floor / Awning for Roof Lodge 140 Extended Roof Tent If you already own a Roof Lodge Extended 140 without awning (not Evolution and EVO II models), this ground tent is the ideal extension. Of course in the same colour and in the same, proven fabric quality as the roof tent itself. This floor tent is suitable for vehicles with a tent mounting height of 150 cm. For higher vehicles, it can be easily adapted with our tent extension strip.The awning, which is simply zipped in, has a footprint of about 2.40 x 2.20 metres. This corresponds to over 5 square metres. It has an entrance, a passage to the vehicle and 2 windows. The floor is made of sturdy tarpaulin, but it can also be removed if desired.Picture shows a Roof Lodge ground / awning together with a Roof Lodge140 Extended, which is not included.Material: 100% nylonThis ground tent is not suitable for our Evolution tents! Not sure if a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far we have found the perfect solution for almost every vehicle.Simply contact us at: 09181 466 644

Tent Raise +30mm, Mounting Set The Roof Lodge mounting set makes it easy to attach roof tents (folding tents or hard-shell tents) to Frontrunner roof racks. The 30 mm height adjustment bridges the circumferential edge of the roof rack.The mounting set is completely made of stainless steel and is supplied with the necessary mounting material. Please select below whether you require the assembly set for a folding awning (e.g. Roof Lodge) or a hard-shell roof awning (e.g. Maggiolina).Scope of delivery of the assembly set for folding tents:4x raising brackets12x screws, nuts and washers (for fastening the brackets to the support and for connecting the bracket to the sliding plate of the mounting rail).Please note: The sliding plates, which are positioned in the mounting rails of the tent, are not included in the scope of delivery!Scope of delivery mounting set hard-shell tents:6x tent raising brackets12x screws, nuts and washers (for fastening the brackets to the support)6x sliding plates (for positioning in the mounting rails of the tent)6x locker bolts with nuts and washers

Roof Lodge awning small, for Basic roof tent Awning for Roof Lodge Basic roof tents, made of hard-wearing, PU-coated RipStop nylon, available in various widths and colours.The awning is quickly and easily attached to the keder rail and provides additional wind, rain, privacy and mosquito protection. It is made of the same material as the roof tent itself: PU coated nylon with 600den.The awnings are also available in another version (2nd version) - here the side sections can be rolled up and erected as canopies using optionally available telescopic poles.We offer the awnings in three colour variations: Reed green (approx. RAL 6013), sand colour (approx. RAL 1002) and oxide red. It is also available in two widths - suitable for our 165 cm roof tents. Please select the desired colour below.The awnings were designed for our old ROOF LODGE roof tents, but are also suitable for other roof tents with 4 keder rails and comparable construction (e.g. our new ROOF LODGE EVOLUTION roof tents, Front Feather roof tents and roof tents of the Horntools brand).You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far we have found the perfect solution for almost every vehicle.Simply contact us at: 09181 466 644

Roof Lodge annex small, for roof tents Basic 2nd version Annex for Roof Lodge Basic roof tents, made of hard-wearing, PU-coated RipStop nylon, available in various widths and colours.The annex is easily and quickly attached to the keder rail, providing additional wind, rain, privacy and mosquito protection. It is made of the same material as the roof tent itself: PU coated nylon with 600den.The side sections can now not only be rolled up, they can also be displayed as canopies with the optionally available telescopic poles.We offer the annex in three colour variations: Reed green (approx. RAL 6013), sand colour (approx. RAL 1002) and oxide red. It is also available in two widths - suitable for our 140 cm and 165 cm roof tents. Please select the desired variant below.The annex were designed for our old ROOF LODGE roof tents, but are also suitable for other roof tents with 4 keder rails and comparable construction (e.g. our new ROOF LODGE EVOLUTION roof tents, Front Feather roof tents and roof tents of the Horntools brand).You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far we have found the perfect solution for almost every vehicle.Simply contact us at: 09181 466 644

CargoBear - Awning holder for New Defender One of the best moments when car camping or at 4x4 meetings is unfolding the roof awning. It means you've arrived and the cozy part is about to begin. Once the awning is up, you can lounge in your camping chair, put your feet up and plan your next activities over a coffee or a cool drink. And since the CargoBear is also available for the New Defender, there is also the option of attaching numerous awnings and awnings. Our awning holders made of black powder-coated stainless steel are screwed onto the slope of at least two crossbars and are suitable for awnings such as the RoofLodge Awning, RhinoRack Foxwing and SunSeeker.  The 3-piece set is supplied including the necessary mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included.    

Sample fabrics roof tent 2023/'24: Are you not quite sure whether the tent fabric or its colour is right for you? Then take advantage of our free sample service - free shipping and no minimum order value within Germany.Which fabric is which? Format of the free fabric samples: approx. 5 cm x 5 cm each. Black mesh: Mosquito net Light beige fabric: Awning 102 g/m² -> Roof Lodge Lightweight roof tentDark olive fabric: Tent fabric 102 g/m² -> Roof Lodge Lightweight roof tent Dark blue fabric: Tent fabric 320 g/m² -> Roof Lodge Evolution2 roof tentCoyote fabric: 320 g/m² tent fabric -> Roof Lodge Evolution2 roof tentStone grey fabric, metal-coated on one side: Awning 280 g/m² -> Roof Lodge Evolution2 roof tentPVC clear: Windows (Please note: PVC should never be treated with alcohol or alcohol-based cleaners! Only use clear water or a cleaner approved for PVC for this purpose)TPU kaki: Roof tent canopy (2021; on request)PVC black: Roof tent cover (2023/'24) - not included in the booklet! Tent skin of the lightweight tent made of 100% Oxford nylon with ripstop, an extremely strong but amazingly light material weighing just 102 g/m². Compared to the 320 g/m² fabric of our Evolution 2, this is a reduction of a whopping 78%.  The tent skin and the awning of the Lightweight are identical in terms of fabric, PU-coated on the inside and waterproofed on the outside. This means that no compromises are made in terms of wind and rain protection.

Practical shoe bag for roof tents Another day is done, be it on the road or outdoors, and you’re looking forward to your cozy sleeping bag either classically in a tent or in your RoofLodge on top of the car. Especially when it’s wet and windy, one thing is of utmost importance for your comfort: shoes have to stay outside! Who wants to have dirt, wet and smell in your sleeping quarters? And just so that you don’t find your shoes in the morning wetter than before, we have a perfect Nakatanenga boot bag for you so that you can keep your stuff clean and dry within reach from the tent. No more plastic bags for you! Our bootbag can be inserted into keder rails and that’s why it is perfect for roof tents. There are two D-hooks as well, so that you can hang the bag from virtually anywhere in the camp or the car: ropes, poles and much more. The bag is big enough to take a lot more than just sneakers, crocs or flipflops. Hiking or biker boots are no problem. A sewn-in elastic cord with a toggle and a big flap with a click fastener make sure that this bag, in contrast to others on the market, can be properly closed. Rain, dirt or nosey animals are kept out for sure. The bottom of the bag features a mesh insert for good ventilation and draining of moisture. Who wants to step into wet and clammy boots first thing in the morning? The robust Nakatanenga shoe bags are available in the colour grey coyote. Material gray-coyote: nylon PU-coated

Adapter set for mounting the roof tent If the attachment points of the roof tent are directly on the feet of the roof racks, the adapter set offsets the attachment points and the roof tent can be mounted easily and safely. Scope of delivery: 2 pcs adapter plates2 pcs counter platesScrews Note:Sliding blocks and sliding plates are NOT included in the scope of delivery! Are only for better understanding shown in the pictures!The adapter plates are only suitable for beams where the beam foot does not include the crossbar.The carrier feet must NOT be machined in any case!

Roof Lodge Evolution Front Extension Arc Shape for Car Awning (Bag Awning). The extension is made from the same high quality material as the Roof Lodge Evolution canopy / awning and provides ideal sun, privacy and wind protection. The extension is simply pulled into the existing keder rail of the awning. The extension has a keder diameter of 6.5 mm and is therefore also suitable for many other awnings. The corners of the extension can be fixed to the ground with the pegs and ropes included in the delivery. The extended length of the extensions is always 200 cm, regardless of the width. Compared to standard awning extensions, this extension has a small curve at the outer end, so that the extension has ideal tension when stretched. This means that it flutters less and withstands stronger winds better. It can be tensioned at an angle or vertically! With an extension that reaches all the way to the ground, you usually feel quite isolated from the surroundings. No wonder, because a completely pulled-down side almost looks like an incomplete awning, but without offering the advantages of an awning. The awning front extensions are available in the following widths: 140, 200, 250 and 270 cm. The length is always 200 cm for all of them Material:280 gsm RipStop polycotton (65% polyester / 35% cotton), PU-coated; water and dirt repellent; significantly less fluttering noise due to the comparatively heavy quality. Attention:The extension cannot be attached at the same time as the awning awning, as both are attached to the same keder rail. Scope of delivery: 1 piece awning extension in the shape of an arch 2 pieces of cords 2 pegs The awning is not included in the scope of delivery! The additional telescopic poles, which can be seen in some pictures, are not included in the scope of delivery of the extension, but are optionally available. Important note: As a subsequent delivery of the materials for this product requires a lot of time, please request the desired item by e-mail if you are interested.    

Side panel for Nakatanenga Evolution2 Awning Roof-mounted car awnings like our EVO II are a great pieces of equipment if you want to turn your 4x4 or van into a quickly set up mobile camp. But proper protection from wind, weather, sun and unwanted attention comes only with the addition of side walls. Conditions vary from location to location and even throughout a single day: the sun is moving from east to west and the wind is changing directions, too. By the sea, it becomes a lot stronger in the evenings and carries dust, sand and the occasional shower. But aside from weather protection, the side tarps also create valuable privacy in crowded camp grounds and other popular locations. Our side walls come in pairs and are the best solution for all these challenges. Simply stick the velcro fasteners to the roof awning’s frame and fasten the tarps to the ground using the four included tent pegs. All of that is simply a question of minutes and if the wind, the sun or a new location demand a change in position you can easily swap the sidewalls to accommodate the situation. The two side wall tarps are made from high quality PU-coated RipStop polycotton, a blended fabric containing 65% polyester and 35% cotton. This highly functional material is extremely resistant to tearing, it is water and dirt repellent and due to its high specific weight of 280 g/ m2 the material will make less noise in the wind. The tarp’s inner side features a layer of aluminum to assist in regulating temperature and to diffuse and amplify low intensity light sources like candles, camping lanterns etc. Color:Stone gray. Dimensions:Width 2 m, height 1.95 m Scope of delivery: 2 x side wall tarp4 x tent pegs Material:PU-coated RipStop polycotto

Additional side panels for Nakatanenga 270° degree awning stone grey, 1 pair The Nakatanenga Evolution 270° roof awning transforms any Defender, T5 & Co into a practical, flexible and, above all, quickly opened camp in an instant. On expedition, on holiday or just for an afternoon at the lake. The basic version of the roof awning comes with two side panels. If you want to turn the awning into an enclosed storage area that is protected on all sides, you can order the two additional side sections here.  Like the side walls already included with the awning, the two additional tarpaulins are made of high-quality, PU-coated RipStop polycotton, a blend of 65% polyester and 35% cotton. The functional fabric is extremely tear-resistant, water- and dirt-repellent and, due to its relatively high weight of 280 g/m2 , it also produces significantly less fluttering noise in the wind. It is aluminium-coated on the inside. This helps regulate heat and also ensures pleasant and effective use of existing light sources due to the diffusing reflection. The side tarpaulins are attached to the poles as required and can be lashed together. This means that when the awning is completely closed, there is hardly any surface for wind and weather to attack    

Car awnings are fantastic pieces of kit. Where else can you chillax better after a hard day on the road or outdoors than in the shade of a car awning? Correct, the answer is nowhere! This fitting set is designed to mount various car awnings and awning tents with 90 brackets or suitable adapters onto traditional roof rack systems with square steel bars. We recommend that each bracket is fixed by two counter plates both on top and underneath the square bar. M8 hex bolts and stop nuts guarantee secure fastening. Contents:8 x counter plates, 8 x M8x50 hex bolt, 16 x 8.4 mm washers, 8 x stop nuts