The Roof Lodge Evolution 2 - roof tent extended You are gently awakened by the sun's rays coming in through the rainproof skylight. You slept well, thanks to the comfortable mattress and the 3D mattress pad underneath. You look around - there is enough space, no mosquitoes or other bugs buzzing around. You open the entrance and get your shoes out of the net attached to the floor of the tent to climb down the ladder. This is your adventure, this is where you want to be! For how long? - That's up to you. Your vehicle will take you anywhere and with the Roof Lodge Evolution 2 rooftop tent you have all the freedom to stay or travel on! Your trip, your experiences, your freedom - no one can take that away from you! For shipping reasons, the stated shipping weight differs from the actual weight. You are not sure whether a roof tent can be mounted on your vehicle? We are happy to support and advise you! So far we have found the perfect solution for almost every vehicle.Just contact us at: 09181 / 466 644 or write us. Roof Lodge Evolution 2 - 140 / 165 Extended  The equipment at a glance Tent skin: 320 g/sqm polycotton, PU-coated; the darker fabric of the tent skin allows a restful sleep even in the morning hoursSun sail: 280 gsm polycotton, metal-coated; due to the comparatively heavy quality, significantly less fluttering noise2 roof windows with rain and mosquito protectionOutward curved poles for better water drainageGround tent made of 280 g/sqm polycotton, metal coated - 165: adaptable to a tent mounting height of approx. 170 cm to 210 cm- floor area approx. 180 cm x 200 cm- 140: tent mounting height of approx. 200cm- floor area approx. 160 cm x 200 cm- floor pan made of PVC fabric- Stable protective cover made of PVC fabric (similar to truck tarpaulin)- 4 side walls; window and entrance door with close-meshed mosquito net Thermoplastic honeycomb floor; German brand productone-piece mattress (60 mm thick); available in two hardnesses; manufacturer: Saar-Schaum, Germany- standard mattress: recommended for persons up to 100 kg or those who like to lie softly- hard mattress: recommended for persons over 100 kg or those who like to lie hard3D mattress base (10 mm thick) for restful sleep; the base prevents condensation.fine-mesh mosquito protection on all windows and the entrance Additionally included with the tent: Aluminum ladder for a mounting height of the tent up to 2 meters incl. Nakatanenga compensating feet; adaptable to the vehicle height (and extendable with an optionally available ladder extension)Stable protective cover made of PVC fabric (similar to truck tarpaulin)LED tent lighting2x Nakatanenga travel pillows6x spring steel polesMounting material and required toolsThe supplied mounting material is used to mount the tent on standard crossbars with a width of up to 120 mm. If you have a different mounting situation, please contact us - we will be happy to provide you with alternative mounting options.pre-drilled mounting rails, which can be shortened according to the mounting situation (for details please refer to the enclosed detailed mounting and maintenance instructions)Roof tent net for shoes and small items (mounted on the front underside of the honeycomb floor). Features: Lying surface: 140 cm x 240 cm (140) / 165 cm x 240 cm (165) ; Height: approx. 120 cmPacking size: 143x124x40 cm (140) / 168x124x40 cm (165)The height of the folded tent is about 45 cm. This measurement is composed of the height of the mounting rails, the height of the folded tent and the height of the ladder lying on the tent. The ladder can be dismantled if necessary (keyword ferry).Can be mounted on off-road vehicles and also passenger carsMaterial: 65% polyester / 35% cotton (tent skin, sun sail & ground tent)Material: 100% cotton (mattress cover) And by the way: Since we naturally apply only the highest standards of material and workmanship to our own Nakatanenga roof tents, they have been manufactured only in-house for many years. As a result, absolutely every step in the process goes through additional quality control. Every tent that is marked with green delivery status in the store can also be picked up from us at short notice by appointment.  

Montagepauschale für die Nakatanenga Roof Lodge Dachzelte in unserem Hause. Wahlweise mit oder ohne Einweisung (wählen Sie bei der Bestellung bitte die passende Variante aus) Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.

You're woken up by the rays of the morning sun shining through the rain-proof roof-top window. You've slept well thanks to the comfortable mattress and the 3D mesh underneath. You're having a look around - there is plenty of space, no mosquitos or other insect that are flying around. You open the entrance and get your shoes out of the separate storage net to begin your descent.  That's your adventure. That's exactly where you want to be! For how long? That's up to you. Your vehicle gets you everywhere and the Nakatanenga Roof Lodge Evolution roof tent gives you all the freedom to stay or to travel onwards! Roof Lodge Evolution 140 Basic Features tent outer fabric: 320 g/sqm Polycotton, PU coated; the darker fabric allows for long sleep through the morning hours awning: 190T nylon fabric, nomad, PU coated; the relatively heavy weight minimizes fluttering noise 2 roof windows with rain and mosquito protection ground tent: - adjustable for tent mounting heights from about 170 cm to 210 cm- base area: 140 cm x 120 cm- floor pan PVC fabric- durable cover made of PVC fabric (similar to lorry canvas covers)- 4 side skirts; window and entrance with close-mesh fly sheeting- the lighter fabric allows outside light to enter the awning thermoplast honeycomb floor; made in Germany once-piece matress (60mm thickness); available in two degrees of hardness, manufacturer: Saar-Schaum, Germany separate 3D base mesh (10mm thickness) for relaxing sleep; the mat prevents condensation close mesh mosquito fly sheeting on all windows and entry  Additionally supplied with: aluminium ladder for a tent mounting height up to 2 metres, adjustable to vehicle height (optional extension available) hard-wearing protective cover made of PVC fabric (similar to lorry canvas covers) 2x LED interior light 2 Nakatanenga travel cushions 8 flexible steel poles fitting material and necessary toolsThe supplied fitting material allows fitting to standard roof bars with a width of up to 45mm. Should you plan to fit differently please contact us in advance - we can help you with alternative fitting scenarios. pre-drilled mounting rails, to be cut to length according to your requirements (instructions in the supplied fitting instructions) Size and Weight sleeping size: 140 cm x 240 cm ; height approx. 120 cm pack size: 147x124x40 cmThe height of the folded tent is about 45 cm, being the sum of the mounting rails, height of the folded tend and the height of the ladder that rests on top of the folded tent. The ladder can be detached from the tent (e.g. when overall height is important like on ferries, etc. weight of tent: 45 kg (incl. protective cover, ladder, mounting rails) can be fitted to vehicles (also passenger cars) with a mounting height up to 2.10 m Information on the subject of roof loads can be found in the manuel / data sheet tab.  

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Sample fabrics roof tent 2023/'24: Are you not quite sure whether the tent fabric or its colour is right for you? Then take advantage of our free sample service - free shipping and no minimum order value within Germany.Which fabric is which? Format of the free fabric samples: approx. 5 cm x 5 cm each. Black mesh: Mosquito net Light beige fabric: Awning 102 g/m² -> Roof Lodge Lightweight roof tentDark olive fabric: Tent fabric 102 g/m² -> Roof Lodge Lightweight roof tent Dark blue fabric: Tent fabric 320 g/m² -> Roof Lodge Evolution2 roof tentCoyote fabric: 320 g/m² tent fabric -> Roof Lodge Evolution2 roof tentStone grey fabric, metal-coated on one side: Awning 280 g/m² -> Roof Lodge Evolution2 roof tentPVC clear: Windows (Please note: PVC should never be treated with alcohol or alcohol-based cleaners! Only use clear water or a cleaner approved for PVC for this purpose)TPU kaki: Roof tent canopy (2021; on request)PVC black: Roof tent cover (2023/'24) - not included in the booklet! Tent skin of the lightweight tent made of 100% Oxford nylon with ripstop, an extremely strong but amazingly light material weighing just 102 g/m². Compared to the 320 g/m² fabric of our Evolution 2, this is a reduction of a whopping 78%.  The tent skin and the awning of the Lightweight are identical in terms of fabric, PU-coated on the inside and waterproofed on the outside. This means that no compromises are made in terms of wind and rain protection.

Since the extended stirrup now has a curved shape, it is best to store it with the new joints without protruding. With the joints, the lower part of the extended bracket can simply be folded in and stowed away without any problems. Instructions for attaching the joints can be found in our downloads.