Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Heater Engine Resistor OEM Land Rover Series 3 Triumph GT6 TR4 TR6Reference number 7H6926.

TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate

Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair

Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.

Caster correction wedges If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.

This set conists of: 1x TREKFINDER Coil Spring Set 2x Upper Supports 2x Lower Supports

ANR-Classic - the rim for the Defender. 8x16-Inch steel in such an classical look, that this rim could be easily termed as the earliest form of the Defender rim. But looks are not everything - the max load of 1160 also impresses. The rims provide an optical broadening of the vehicle, which seems only subliminal, because it still emphasises the classic look of the vehicle.  Fits all Land Rover Defender models built until 2016. The ANR-CLASSIC 8X16 Zero-Offest / ET0 is produced for Nakatanenga and only available at Nakatanenga and at our reseller. Data sheet:Tyre size: 8X16Offest: 0 (zero)Max Load: 1,160 kgBolt circle: 165.1 mmCentre Hole: 113 mmCentering: Bolt centering Surface and prices:- black primed - black painted, RAL 9005- white painted, RAL 9010 - white powder coated, RAL 9010 For almost all Defenders ; incl. TÜV certificate.2,25 L Petrol 55 KW (75 PS) - 2,25 L Diesel 45 KW (60 PS)2,5 L Petrol 63 KW (83 PS) - 2,5 L Diesel 50 KW (67 PS)Rover V8 3,5 L Petrol 84 KW (115 PS) und 101 KW (135 PS)2,5L Turbodiesel 63 KW (83 PS) - 200 TDI 2,5 L 80 KW (107 PS)300 TDI 2,5 L 83 KW (113 PS) - TD5 2,5 L 91 KW (122 PS)TD4 2,4L 91KW (122 PS) - 2,2 TD Diesel 91KW (122 PS)4BD1 3,9 L 73 KW (98 PS) Approved for following tyre sizes:245/70 R 16 255/65 R 16 255/70 R 16255/85 R 16265/70 R 16265/75 R 16275/70 R 16 285/75 R 16 295/75 R 16