Standard main beam headlights do the job as long as the road runs straight to the supermarket. Once the tarmac ends, everything left and right of the track goes dark fast. And from that point on, the terrain tends to keep surprises ready, for example a deer that doesn't see the off-roader coming, or a road edge that suddenly drops away into a deep ditch. The Vision X CG2 CPM710 Light Cannon make those surprises visible: multi-LED driving lights for the Ineos Grenadier, built for short and medium range. The beam of the Vision X auxiliary driving lights for the Grenadier Each lamp holds seven LEDs of 7 watts each, every one with its own 10° optic, and together they produce a wide driving beam. That works out to 49 watts per lamp, so 98 watts as a pair. Colour temperature sits at 6,000 Kelvin, which gives the light a clear, neutral-white character. Anyone looking for range rather than width should take a look at the single-LED sibling, the Vision X CG2 CPZ110. Clear or yellow lens? The Vision X auxiliary driving lights for the Grenadier come with either a clear or a selective yellow lens. Clear delivers the full light output and is the standard choice for clear nights. The yellow version is built for the days when something is hanging in the air, like dust on a desert track, mist in the mountains, driven snow on a pass, or heavy rain in the forest. Yellow light scatters less on particles in the air and therefore does not build the blinding wall in front of the bonnet that clear light can throw up when visibility drops. Housing waterproof and tough The housing of the CG2 CPM710 is a hybrid of aluminium and polycarbonate, tough enough for stone chips and light enough for the grille. The lens is acrylic, and together the lamps are IP68 waterproof and IP69K pressure-washer tested, stand up to 21.2 Grms of vibration, and operate between minus 40 and plus 80 degrees Celsius. The LEDs are rated for around 50,000 hours. Fitment in the grille, no drilling Vision X developed this kit specifically for the Ineos Grenadier and tested it on the vehicle in Europe. The lamps sit neatly in the grille with the supplied brackets, with no drilling or cutting required, so parking sensors and driver assistance systems stay fully functional. The plug-and-play wiring loom brings everything needed, including relay, fuses, and a CAN-bus connection, so the driving lights switch on automatically or manually together with the main beam. Anyone who wants to revert to the original setup can do so at any time. Technical specification Dimensions (L × W × H): 14.5 cm × 9.4 cm × 13.4 cm Manufacturer: Vision X LED type: 7 × 7 W LEDs, each with 10° optic (multi-LED) Power: 2 × 49 W (98 W as a pair) Luminous flux: 10,500 lumens total Range: approx. 215 m Beam type: wide driving beam Colour temperature: 6,000 K Lens: acrylic, clear or selective yellow Input voltage: 9 to 32 V DC Current draw: 4.08 A per lamp at 12 V (8.17 A as a pair), 2.04 A at 24 V Weight: 1.3 kg per lamp Housing: hybrid (aluminium and polycarbonate) Protection rating: IP68 waterproof, IP69K pressure-washer tested Vibration rating: 21.2 Grms Operating temperature: −40 °C to +80 °C Lifespan: around 50,000 hours Certifications: CE, RoHS, IEC 62471, ECE R112 (driving lamp) Connector: Deutsch connector In the box: 2 driving lights with connection cable
Prices incl. VAT;
Some nights stretch so deep into darkness that the standard main beam eventually just runs out. On a gravel track in Lapland or a desert stage in Morocco, it always ends the same way: the beam fades into nothing, and the next bend stays invisible. This is where the Vision X CG2 CPZ110 Light Cannon really show what they can do, because these single-LED driving lights for the Ineos Grenadier with ECE R112 approval are built for exactly those moments when range matters more than a wide beam. The beam of the Vision X auxiliary driving lights for the Grenadier Each lamp holds a single Luminous Big Chip LED with 40 watts, and the iris reflector from Vision X focuses the light so sharply that, according to the manufacturer, it reaches up to 340 metres. As a pair, the lamps draw 80 watts in total at a colour temperature of 6,000 Kelvin, which gives the light a clear, neutral-white character. Anyone looking for width rather than distance should take a look at the multi-LED sibling, the Vision X CG2 CPM710. Clear or yellow lens? The Vision X CG2 CPZ110 is also available with either a clear or a selective yellow lens. The clear lens delivers the maximum range and is the standard choice for clear nights. The yellow version is made for the days when something is hanging in the air, such as dust on a desert track, mist in the mountains, driven snow on a pass, or heavy rain in the forest. Yellow light scatters less on particles in the air and therefore does not build the blinding wall in front of the bonnet that clear light can throw up when visibility drops. Housing waterproof and tough The housing of the CG2 CPZ110K is a hybrid of aluminium and polycarbonate, tough yet not too heavy for the grille. The lens is made of acrylic, and together the lamps are IP68 waterproof and IP69K pressure-washer tested, withstand 21.2 Grms of vibration, and operate between minus 40 and plus 80 degrees Celsius. The LEDs are also rated for around 50,000 hours. Fitment in the grille, no drilling Vision X developed this kit specifically for the Ineos Grenadier and tested it on the vehicle in Europe. The lamps sit neatly in the grille with the supplied brackets, with no drilling or cutting required, so parking sensors and driver assistance systems stay fully functional. The plug-and-play wiring loom brings everything needed, including relay, fuses, and a CAN-bus connection, so the driving lights switch on automatically or manually together with the main beam. Anyone who wants to revert to the original setup can do so at any time. Technical specification Part number: GRE-CG2-CPZ110KITM Manufacturer: Vision X LED type: 1 × 40 W single-source Luminous Big Chip LED Reflector: iris reflector technology Power: 2 × 40 W (80 W as a pair) Luminous flux: 2 × 3,000 lumens (raw lumens at the LED), 2 × 2,100 lumens effective after optics Range: up to 340 m Beam type: single-LED spot (10°) Colour temperature: 6,000 K Lens: acrylic, clear or selective yellow Input voltage: 9 to 32 V DC Current draw: 3.33 A per lamp at 12 V (6.67 A as a pair) Dimensions: 137.6 × 134 × 94 mm Weight: 1.3 kg per lamp Housing: hybrid (aluminium and polycarbonate) Protection rating: IP68 waterproof, IP69K pressure-washer tested Vibration rating: 21.2 Grms Operating temperature: −40 °C to +80 °C Lifespan: around 50,000 hours Certifications: CE, RoHS, IEC 62471, ECE R112 (driving lamp) Connector: Deutsch connector, weatherproof Package contents: 2 driving lamps with wiring loom
Prices incl. VAT;