Stainless Steel Bolt Kit for Front Bumper Defender 90/110/130

Number plate holder for winch bumpers with a 10-inch winch window Where do you put the number plate when the winch window is situated exactly where the number plate would normally be fitted? Our number plate holder provides a simple and neat solution. The holder is fitted directly to the existing mounting points of the winch window and re-centres the number plate at the front of the vehicle. Access to the winch window is maintained and the winch’s functionality is not impaired. Originally developed for our Nakatanenga NAWIBU winch bumper, the number plate holder is universally suitable for winch bumpers or winch windows with a bolt hole spacing of 10 inches / 25.4 cm. This means it can also be used on numerous bumpers from other manufacturers, provided the correct mounting spacing is available. The holder is made from aluminium and then powder-coated in RAL 9005 smooth matt black. This makes it lightweight, robust and ensures it blends discreetly into the front of the vehicle. Suitable for: Winch bumpers with a winch window Mounting hole spacing: 10 inches / 25.4 cm Nakatanenga NAWIBU winch bumper Other winch bumpers with a corresponding hole pattern Material: Aluminium Finish: RAL 9005 smooth matt, powder-coated Note: Please check the hole spacing of the existing winch window before ordering. Please note (in accordance with Section 10(5) of the Motor Vehicle Registration Regulations): Number plates must be fitted to the front and rear of the motor vehicle and must be securely attached.

Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.

Stainless Steel Screw Set for Land Rover Defender 90 SW / 90 HT / Soft Top – approx. 390 Pieces NOW EXCLUSIVELY manufactured for us in the ORIGINAL Land Rover head shape. The screw heads have the same shape as the original screws fitted to the Defender! The complete set contains approximately 390 pieces.With this set, all externally visible screws on the vehicle can be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Suitable for Land Rover Defender 90 SW, 90 HT and 90 Soft Top of all model years – Tdi, Td5, Td4 2.4 and Td4 2.2. The screws for the side-door and rear-door hinges, as well as the rear body mounting screws, are specially manufactured for us and match the shape of the original Land Rover screws – including the Torx tool fitting. To make a set of around 390 pieces easy to work with, the screws for the different vehicle areas are clearly pre-sorted into 10 separate bags. The 10 vehicle areas include: Rear door hinges Rear body mounting Radiator grille Load area trim + reflectors Bonnet hinges Rear crossmember Spare wheel carrier Headlight surrounds + wing covers Side door hinges Inner door sills + A-pillar Also included:2 specially manufactured bonnet buffer screws made exclusively for us. Installation is generally straightforward and can also be carried out by ambitious DIY mechanics. The pre-sorted packaging makes it easy to identify which screws belong to each area of the vehicle. Anti-seize paste included:The screw set includes anti-seize paste for installing the stainless steel screws. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different accessories and vehicle configurations. Some screws may therefore be left over after installation.

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Stainless Steel Screw Set for Land Rover Defender 110 SW / 110 CC / 130 CC EXCLUSIVELY manufactured for us in ORIGINAL Land Rover style.The screw heads match the original Defender screws in shape and appearance! The complete set contains more than 440 parts. It allows the externally visible screws on the vehicle to be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Especially on older Defenders, this gets rid of unsightly rusty screw heads while retaining the characteristic original appearance. Suitable for all model years – TDi, Td5, Td4 2.4 and Td4 2.2. A particular highlight: the screws for the side-door and rear-door hinges as well as the rear body mounting screws are manufactured specially for us and match the shape of the original Land Rover screws, including the Torx drive. Specially manufactured bonnet buffer screws are also included in the set. With more than 440 parts, organisation matters. That's why the screws are clearly sorted into 10 separate bags according to the relevant area of the vehicle. The set includes screws for the following areas: rear door hinges rear body mounting radiator grille load-area trim + reflectors bonnet hinges rear crossmember spare wheel carrier headlight surrounds + wing covers side door hinges inner door sills + A-pillar 2x bonnet buffer screws Installation is generally straightforward and can also be carried out by competent DIY mechanics without specialist workshop equipment. The clearly sorted packaging makes it easy to identify which screws belong to which area of the vehicle. Anti-seize paste included:The set includes anti-seize paste for installation. When replacing such a large number of fasteners with stainless steel screws, this is simply part of a properly thought-out kit. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different vehicle versions and accessories. It is therefore possible that some screws will remain unused after installation.

Stainless Steel Screw Set for Land Rover Defender 110 HT – approx. 390 Pieces NOW EXCLUSIVELY manufactured for us in the ORIGINAL Land Rover head shape. The screw heads have the same shape as the original screws fitted to the Defender! The complete set contains approximately 390 pieces.With this set, all externally visible screws on the vehicle can be replaced with high-quality, corrosion-resistant V2A stainless steel screws. Suitable for Land Rover Defender 110 HT of all model years – Tdi, Td5, Td4 2.4 and Td4 2.2. The screws for the side-door and rear-door hinges, as well as the rear body mounting screws, are specially manufactured for us and match the shape of the original Land Rover screws – including the Torx tool fitting. The set also includes specially manufactured bonnet buffer screws made exclusively for us. The screws are clearly sorted by vehicle area into 10 separate bags: Rear door hinges Rear body mounting Radiator grille Load area trim + reflectors Bonnet hinges Rear crossmember Spare wheel carrier Headlight surrounds + wing covers Side door hinges Inner door sills + A-pillar 2 bonnet buffer screws Installation is generally straightforward and can also be carried out by ambitious DIY mechanics. The pre-sorted packaging makes it easy to identify which screws belong to each area of the vehicle. Anti-seize paste included:The screw set includes anti-seize paste for installing the stainless steel screws. Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB). Depending on the vehicle and installation situation, the door hinge screws may need to be shortened. The individual sub-sets contain some additional screws to cover different accessories and vehicle configurations. Some screws may therefore be left over after installation.