Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions.  Additionally and for an even easier instalation, all the nuts and bolts are already included.

POWERspec Suzuki Jimny GEN2 1.5L, from MY 2018, clutch kit The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Jimny Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15, offset: -5 After the great response to the J-01 wheel, we wanted to do something different with the second original design. We present you the HIGH PEAK J-02. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU). TÜV type approved and strength tested. Also compatible with JB43 (1998-2018) models. Made in Italy. Guaranteed European quality Bolt-on mounting with standard or raised chassis. No additional modifications required (depending on tyre size). Diameter : 15Width : 6OFFSET : -5Bore / PCD : 5x139.7Finish : matt black, anthracite, matt bronze or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.deTel. : +49 9181 466 644

Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life. With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light. Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play. If you only need the adapter cables, you can find them here. The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights. Scope of delivery: 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome Adapter: 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.   Note:  The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard. Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).    

Wheel set Dotz Dakar Steel Rim and BFGoodrich All Terrain Tire  A bigger footprint with Dotz Dakar Steel Rims and BFGoodrich All Terrain tires not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim. The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released as a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims. We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim with sizes  7x16”  with an offset of 0 mil.  A great rim needs an equally great tire and with the BFGoodrich All Terrain there’s no doubt that it’ll be up to the challenge. As a proven all-season multi-purpose tire, the latest T/A KO2 generation boasts even more improvements and better test results over its predecessor: the tire’s sidewalls are 20% more robust, durability doubles on gravel and adds another 15% on asphalt. Traction is also improved with an increase of 10% and 19% for slush/mud and snow, respectively. As far as the look is concerned the tire can be mounted with the white print to the in- or the outside. Certification documents are included. The wheel sets are available with or without spare wheel. The tire is suitable and permitted for winter use. Size:Rim 7 x 16" / ET 0.0 Silver wie tire size 225/75R16*Rim 7 x 15" / ET 0.0 Silver with tire size 215/65R16 * Required Modifications for 16” Wheel Set This wheel set size requires a suspension raising kit. The speedometer requires a ratio adapter. The wheel arch covers need to be adapted. Please let us know when ordering whether the white lettering is to be mounted inside or outside.

Wheel spacer for SUZUKI Jimny II Suitable for Jimny II type GJ from model 2018 and type HJ Only the following wheel/tyre combination is listed in the parts certificate: Wheel spacer from TREKFINDER 44 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacer from TREKFINDER 50 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacers from TREKFINDER 56 mm for 2 axles195/80 + 205/75 and 215/75R15 The Trekfinder 56 mm wheel spacer for 2 axles is available with and without mudguard widening. Colour: Trekfinder: silver aluminium