Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm

How do you improve the CargoBear? By clicking our rubber covers into fully or partially unused lashing openings in the rack. With our 30 mm wide and 10 cm long strips, you can quickly and securely seal the gaps. The rubber covers give you a whole range of noticeable advantages. Firstly, they improve load safety on the already very slip resistant CargoBear even further. When you position the cargo on top of the rubber strips, the ribbed surface structure prevents the lashed down cargo from sliding. A second effect is created by the rubbers’ added height of 3.5 mm, which lifts the cargo off the actual rack, preventing scratching or damages to both. And last but not least, the covers also prevent vegetation from getting trapped or stuck in the sideways rails when off-roading. The covers sport rounded edges for a better fit. The rubber cover strips for the CargoBear can be ordered in sets of 6 or 24 respectively. One crossbar requires a set of 6 for Defender, Jimny or G-Class. A set of 24 covers one cargo panel with the above-mentioned 4x4s, i.e. the minimum configuration of 2 cross bars and one panel requires 2 sets of 6 and one set of 24. If you have any questions, don’t hesitate to get in touch.

Modular vehicle panels, incl. Fastening material Are you familiar with that? The Cubby Box overflows, the glove compartment is tiny and long before the car approaches the tipping angle, everything slips or flies through the area, which was "quickly" somewhere stored. Stop it! The modular, MOLLE-compatible panels for seats, headrests and sun visors give everything that must remain within reach within a short time, its place in the vehicle. They expand the existing storage space enormously, are customizable and flexible and can be optimally combined with our MOLLE bags, our tensioning and fastening straps or the Quickfists for attaching heavy objects. The panels are available individually or as a set with our MOLLE bags. Material: PE plastic Available in: 3 X 3 (suitable for headrest  - 17,5x15 cm)5 X 3 (suitable for sun visor - 27x15 cm)11 X 9 (suitable for vehicle seat - 57,5x37,5 cm)11 X 9 with bag set11 X 9 with bag set and first aid bag Please note:Quickfist, gloves, ax and our Funky Chicken are shown in the photos - these are NOT included in the delivery! Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!

All packed up for your trip? Of Course! But where is it? For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time. The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible. Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!

Tailgate Organizer - tailgate organiser system for various vehicles. Where to put all those little things in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organiser makes use of the mostly unused space on the tailgate. In several pockets with MOLLE attachment system (abbreviation for MOdular Lightweight Load-carrying Equipment), all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Laser-Cut compared to MOLLE with stitching: lighter in comparison, as much less sewing material is used quicker to attach and detach e.g. first aid bag flatter than sewn MOLLE  prevents unintentional snagging optimum hold and no slipping What is Molle? Information can be found in the downloads. The sets are made up as follows: Land Rover Defender:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny until year of construction 2018:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Suzuki Jimny 2:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Jeep Wrangler JK:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Mercedes G until year of construction 2018:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Universal 650x250 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 650x250 mm    optional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 740x350 mm    optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to rely exclusively on ecologically and health-safe alternatives such as nylon PU when coating textile products.Fastening: For mounting, the cover must be removed, for this our dismantling tool is perfectly suitable, then holes must be drilled, cover put back on and then only screwed on.To ensure the best possible availability of this product, the choice of bags supplied may vary in exceptional cases. If a single bag is not available, it will be replaced by a model of at least the same quality. Tailgate Organizer custom made:     We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser cut MOLLE panels. Should you require a different design, please enquire via the contact form.

Nakatanenga Seat Cover for Defender TD4 ('07 +) Nakatanenga seat covers for Land Rover Defender Td4 from 2007 These seat covers are now even more accurate than the previous ones and thus provide the ultimate protection with the highest comfort. Seat and back is made of high quality and breathable mesh material. The driver's and front passenger's seats are equipped on both sides with pratic Laser Cut Molle. This can also be found at the back of the seats. Furthermore, the driver and front passenger seats on the back have both a card pocket and a zipped pocket. The Molle offers a variety of possibilities. For example you can attach our practical bag set, with our tightening and fastening belt set fix small items or stow a first aid scissors within reach. The high-quality Laser Cut Molle on the backs of the backrests and on both sides of the front seats allows you to attach many different accessories. Driver or passenger side is 2-pieces each. (Seat cover + headrest)Rear seat is 5-pieces (3 headrests, 1 small cover, 1 large cover) Product features: large map pocket on the back of the backrest zipped pocket on the back of the backrest vlecro / loop tape on the headrests lasercut Molle attachment system for attaching additional bags or equipment (partially on the side and on the backrest) washable at 30 ° C perfect fit, no slipping extremely stable the customized slipcover is suitable for Land Rover Defender Td4 from 2007 Material: 1000D nylon PU coatedWashable 30-60° C Available: in black for front and rear seats Bundle: 2x seat covers for the front seats and 1x cover for the complete rear seat Please select the desired variant. Please note:In the variant "front" 1 piece is delivered - driver and passenger side have the same reference. So if you want to order a cover for the driver and front passenger side, you have to order 2x the variant Front.

Saving Bundle! Here you get the perfect set for your load securing! Simply add additional attachment points to your vehicle.The lashing points and single studs are flexible and therefore always in the right place!Fast and safe installation. One bundle consists of:6 pieces lashing points (diameter 45 mm, thickness 10.3 mm)6 pieces Single Stud (load 300 kg, ring diameter 40 mm, anodized aluminum, UV and salt water resistant) 5 sets (30 pieces lashing points + 30 pieces single studs) cost only 100€! Only while supplies last!* Compared to single purchase