Ähnliche Artikel

Colouring agent 500 ml for 5 l RAPTOR Colourable, for all RAL colours

500 ml colouring agent for 5l RAPTOR dyeable, for all RAL colours

Colouring agent for RAPTOR dyeable 500 ml of colourant is sufficient for 5 litres of RAPTOR Liner. Any RAL colour can be mixed. For example, in conjunction with the following RAPTOR articles:- U-POL RAPTOR coating - 1 bottle kit, coating and hardener, colourable- U-POL RAPTOR Coating - 4 bottle kit- RAPTOR Liner 5LPlease state the desired RAL colour in the order text when placing your order.

Product number: FAERBEMITTEL-500-RAL

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 0.5 liters (€118.00* / 1 liters)

€59.00*

RAPTOR 2K epoxy primer with rust protection

RAPTOR 2K anti-corrosive epoxy primer

Raptor 2K Anti-Corrosive Epoxy Primer Aerosol RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer aerosol specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces. It contains a blend of anti-corrosive additives to inhibit rust and corrosion.Easy and convenient - activate using the valve on baseNo need for spray equipment

Product number: RAPTOR-2K-ANTICORR

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 0.4 liters (€77.50* / 1 liters)

€31.00*

RAPTOR Adhesive Promoter Can

RAPTOR Adhesive Promoter Can U-POL offers a full range of additional products for the preparation, use and optimization of your RAPTOR application. Promotes paint adhesion on most automotive surfaces such as plastic, aluminum, galvanized steel, zinc, painted surfaces, fiberglass and also on smoothed surfaces.There is no need to sand down surfaces in hard-to-reach areas (such as under bonnets or trunk lids). Excellent adhesion properties: sprays flat can be painted over with most water- or solvent-based paint systems serves as a protective layer against peeling and protects against damage from solvents

Product number: RAPTOR-HAFTMITTEL

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 0.45 liters (€42.22* / 1 liters)

€19.00*

RAPTOR hardener 5L

The 5 Litre RAPTOR tins are ideal for large areas such as trailers, floors, heavy equipment and full oversprays. Mix 3:1 (15 L of RAPTOR to 5 L of Hardener) to make more than 20 L of RAPTOR and cover approximately 60 m²Can be brush applied, rolled or sprayed through pneumatic or conventional HVLP spray equipment Features: TINTABLECan be tinted to match required colour.Also available in black. DURABLEProvides tough mechanical damage and stain resistant surface.Protects against rust and corrosion. U.V. RESISTANTDelivers a high level of fade resistance: WATER RESISTANTProvides a water resistant finish, keeping moisture out and reducing rust. RESITSTANTResistant against fuels, hydraulic oils, animal urine, salt water and more. QUICK & EASY TO USEEasy as Fill-Shake-Shoot.Provides excellent adhesion across many substrates.Can be applied with Schutz gun, HVLP gun, roller or brush. Certificates: FIRE RESISTANCERAPTOR has passed flammability testing for motor vehicles according to the test methods FMVSS 302,ISO 3795 & BS AU 169A. SLIP RESISTANCEWhen used with RAPTOR TRACTION Anti-Slip Additive it produces a finish meeting ASTM E303-93.

Product number: RAPTOR-HAERTER

Weight: 7,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 5 liters (€32.60* / 1 liters)

€163.00*

RAPTOR liner black 5L

RAPTOR-LINER black or tintable The 5 liter RAPTOR canisters are perfect for large areas such as trailers, floors, heavy equipment and complete oversprays. - Mix in a ratio of 3: 1 (15 liters of RAPTOR to 5 liters of hardener), so that 20 sprayable liters of RAPTOR are created - sufficient for an area of around 60 m².- Can be applied with a brush or sprayed with pneumatic or conventional HVLP spray equipment.- Suitable for applications in the areas of vehicles, construction, seafaring, leisure, industry, agriculture and trade. The robust and tintable RAPTOR protective coating from U-POL is a two-component coating made of polyurethane, which provides surfaces with a protective layer.Properties:- Durable:Provides a surface that resists mechanical damage and is stain resistant.Protects against rust and corrosion. - UV-resistant:Characterized by high light fastness. - Waterproof:The result is a waterproof surface that keeps moisture away and prevents rust. - Resistant:Resistant to fuels, hydraulic oils, animal urine, salt water and more. - Quick and easy to useSimply fill, shake and spray.Ensures excellent adhesion on various substrates.Can be applied with a protective gun, HVLP gun, roller or brush.Certificates:Fire resistance RAPTOR has passed flammability tests for automobiles using the test methods FMVSS 302, ISO 3795 and BS AU 169A.When used with the RAPTOR additive for slip resistance, a surface is created that meets the ASTM E303-93 standard.Substrates and preparation: - Original paint- Polyester filler- SMC- Aluminum * - Most types of plastic * - Cataphoresis * - Bare metal * - Fiberglass-concrete * - Galvanized surfaces * - Glass fiber reinforced plastic- wood ** Some substrates require one before applying RAPTOR additional surface preparation.

Product number: RAPTOR-LINER-BLKM

Weight: 7,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 5 liters (€35.40* / 1 liters)

From €177.00*

Select version

U-POL RAPTOR colorant 45ml

Performance is one thing and, as is well known, there is no mistaking the polyurethane coatings from RAPTOR: Long-lasting UV and rust protection and high resistance to chemicals of all kinds are guaranteed - provided they are used properly. But the RAPTOR look is of course not entirely unimportant. In addition to various textures from smooth to rough, extremely cool color combinations can also be achieved very easily. Our selection of original RAPTOR COLORS is specially tailored to the RAPTOR multi-purpose coating. There are no surprises or trial and error when mixing, using or with the result. The whole work process runs with the usual RAPTOR precision and the typically simple handling: Simply put the contents of a 45ml bag in the 1L bottle of coating, then add the hardener, shake for two minutes and get started. Detailed instructions on how to achieve different textures when spraying are included. Of course, as with any painting job, a color test is recommended. Available in the colors Beige, Light Brown, Sepia Brown, Green, Light Green, Pine Green, Orange and Olive. And another tip: since every RAPTOR COLOR color bag is precisely matched to a bottle of coating in terms of quantity, when ordering larger quantities, it may be cheaper to use our 4-bottle RAPTOR coating kit than with individual bottles. Reduced colors: Only while stocks last

Product number: RAPTOR-45-6010M

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 0.045 liters (€222.22* / 1 liters)

From €10.00*

Select version

U-POL RAPTOR coating - 1 bottle kit, coating and hardener, colourable

The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in a colourable version. Suitable for application: Standard RAPTOR spray gun RAPTOR spray gun with adjustable spray nozzle for better texture adjustment Roll-on set (application via paint roller) We recommend preparing the substrate: MIPA Etch-Primer U-Pol universal etch primer spray U-Pol etch primer 1K plastic adhesion promoter The RAPTOR coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please follow the application instructions in the instructions/data sheet.Why use the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface+ COLOUR CHOICE:The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery: - 1x 710 ml coating - 1x 240 ml hardenerClassification according to the CLP Regulation Symbols GHS02: Flame GHS07: Exclamation mark Signal word Danger! H-phrases H222 - Extremely flammable aerosol.H229 - Pressurised container: May burst if heated.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation. Safety instructions P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.P211 - Do not spray on an open flame or other ignition source.P251 - Do not pierce or burn, even after use.P280 - Wear eye protection, protective clothing, protective gloves.P337+P313 - If eye irritation persists: Get medical advice/attention.P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C. EUH phrases EUH204 - Contains isocyanates. May cause allergic reactions.EUH066 - Repeated exposure may cause skin dryness or cracking.Unknown acute toxicity (CLP) - SDS : 0.35% of the mixture consists of one or more component(s) of unknown acute toxicity (inhalation (vapours))

Product number: EINE-BOT-RAPTOR-CA

Weight: 1,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

Content: 1 liters (€3.50* / 0.1 liters)

€35.00*

Raptor roll-on set, incl. paint roller, paint trays, sanding tile, disposable gloves, 4-bottle kit

U-POL Raptor Roll-On-Set

Now it is no longer necessary to spray with a compressor and spray gun - with our new Raptor Roll-On-Set you can now also apply the popular RAPTOR-coating by yourself without any problems! As an official distributor of the popular RAPTOR-coating we have come up with a simple DIY solution together with the official manufacturer U-POL: since the Raptor-coating, unlike other coatings, does not have to be heated, you can use this roll set. The roll-on set consists of:1x color roller bracket with ergonomic profile3x coarse foam structure rolls in top quality (Ø 35 mm)2x paint trays or paint trays with practical spout nose and integrated measuring strokes (15x32 cm)2x sanding pads for sanding the surface (1x with alumina grain type and 1x with silicon carbide grain type)2x disposable gloves Please refer to the instructions / data sheet for processing instructions.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, white, tintable, black Please note:The color of the tub and the paint roller bracket may differ. Examples of the Raptor coating:

Product number: RAPTOR-ROLLON

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€15.00*

U-POL RAPTOR spray gun for applying the coating

U-POL RAPTOR spray gun for applying the coating Spray gun for applying the coating, for screwing onto Raptor bottles.

Product number: RAPTOR-SPRITZPISTOLE

Weight: 2,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€28.00*

Das könnte Sie auch interessieren

U-POL RAPTOR spray gun for applying the coating

U-POL RAPTOR spray gun for applying the coating Spray gun for applying the coating, for screwing onto Raptor bottles.

Product number: RAPTOR-SPRITZPISTOLE

Weight: 2,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€28.00*

U-POL RAPTOR Coating - 1 Bottle Kit, Coating & Hardener, black

U-POL RAPTOR Coating - 1 Bottle Kit, Coating & Hardener, Black Raptor-preparation-processing-instruction-560The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the right thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in black or self-colourable. Please select your desired product under "Variant".Suitable for application: Standard RAPTOR spray gun RAPTOR spray gun with adjustable spray nozzle for better texture adjustment Roll-on set (application via paint roller)For preparation of the substrate we recommend MIPA Etch-Primer U-Pol universal adhesive primer spray U-Pol etch primer 1-component plastic bonding agentThe RAPTOR coating can be combined with RAPTOR epoxy primer or RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please observe the processing instructions provided under Instructions/Data Sheet.Why the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery: 1x 710 ml coating 1x 240 ml hardener <iframe width="560" height="315" src="https://www.youtube.com/embed/ezVsBjayjYA" title="RAPTOR Protective Coating - Land Rover Makeover" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/x_QyUZZ0Ys0" title="U-POL RAPTOR Bedliner and Protective Coating - Black with Kevin Tetz" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Product number: EINE-BOT-RAPTOR-9011M

Weight: 1,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€35.00*

Select version

U-POL Raptor Roll-On-Set

Product number: RAPTOR-ROLLON

Weight: 1,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€15.00*

U-POL RAPTOR spray gun with adjustable spray nozzle

U-POL RAPTOR spray gun with adjustable spray nozzle Spray gun with adjustable spray nozzle for applying Raptor multi-purpose coating. For screwing onto Raptor bottles. The adjustable spray nozzle provides a professional and even finish and is suitable for better texture matching.Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:

Product number: RAPTOR-GUNVN

Weight: 2,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€72.00*

U-POL RAPTOR Coating- 4 bottle Kit

U-POL RAPTOR - The robust protective coating that also looks good! In contrast to other coatings, the RAPTOR multipurpose coating / painting does not need to be heated. It can simply be sprayed on and then hardens. For a mixture of 1 liter 50ml of paint are required - 1 liter covers an area of approx. 4.2m² - for processing we recommend the standard RAPTOR spray gun, the RAPTOR spray gun with adjustable spray nozzle for better texture adaptation or our roll-on -Set (application via paint roller). To prepare the substrate, we recommend the MIPA Etch primer, the MIPA 1K adhesion promoter, the U-POL universal primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please note the processing instructions stored under instructions / data sheet. What is RAPTOR protective coating / painting? The RAPTOR protective coating is a particularly robust coating made of polyurethane.This give surfaces an efficient and long-lasting protective layer, which is ideal for demanding conditions. The RAPTOR paintwork was developed in such a way that it can withstand almost any weather condition. The reliable UV resistance does not allow fading or fading - not even after many years in the sun. In addition, it offers the best protection against rust formation - thanks to the waterproof surface! Why the RAPTOR multipurpose coating? + PROTECTION:The coating offers excellent UV protection and, thanks to its ideal seal, protects against rust, corrosion, moisture and extreme temperatures. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES:You have the option of creating smooth or structured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a sheen. + COLOR CHOICE:The multi-purpose coating can be tinted according to the color of your choice or sprayed over with different colors. Scope of delivery: 4x 711 ml bottles coating946 ml hardener

Product number: RAPTOR-4B-9011M

Weight: 5,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €133.00*

Select version

U-POL RAPTOR Traction anti-slip additive - 200g

Name: U-POL RAPTOR Traction anti-slip additive - 200g
Brand: U-POL Ltd
SKU: RAPTOR-TARZ
Price: 9.0 EUR
Availability: InStock

€9.00*

Content: 0.2 kilograms (€45.00* / 1 kilograms)

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️️ Non-slip additive for surface coatings ✔️ 1x 200 g pack ✔️ Best quality ✔️ Fast shipping

Available from stock - delivery time 1-3 working days

Piece

Product number: RAPTOR-TARZ

Weight: 0.5 kg

U-POL RAPTOR Traction anti-slip additive - 200g

1x 200 g resealable pack

Non-slip additive for surface coatings. It can be added to RAPTOR multi-purpose coating directly before spraying.

Using RAPTOR TRACTION with RAPTOR gives a non-slip surface to BS 7976-2.

One 200 g pack is sufficient for one bottle of RAPTOR multi-purpose coating (spray bottle).

Why use RAPTOR multi-purpose coating?

+ PROTECTION:
The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.

+ UNIQUE TEXTURES:
You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.

+ CHOICE OF COLOUR:
The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.

You can order the Raptor multi-purpose coating separately here in the shop:
1 litre, dyeable
1 litre, black
4 litres, black

Examples of the Raptor coating:

Documents

Sicherheitsdatenblatt Raptor Traction