TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels. The following vehicles are approved according to the TÜV parts certificate: Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*... The following wheel/tyre combinations are approved according to the TÜV parts certificate: 265/70R17 with 7.5x17255/70R18 with 8.0x18 Scope of delivery: Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained. Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel. Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met: - Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.  

Molle panel for the two rear door windows inside / Ineos Grenadier - damage-free installation without drilling The aluminium window panels are simply attached to the inside of the windows using suction cups and are compatible with all Molle products in our range. The possibilities for combination and personalization are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, these modular panels make it possible. FixPlus Straps are also a good addition. And if you don't need the panels at the moment or if you sell the trolley, you can dismantle them without leaving a trace. Material: ALUMINIUM, black powder-coated Scope of delivery: 2 vehicle panels, incl. fastening material (suction cups)

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Complete wheelset Radar Renegade A/T-5 All Terrain 265/65R18 114H on Borbet CW7 alloy wheels Premium off-road tyres Radar Renegade A/T AT5 265/65 R18 114H: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained from motorsport, countless victories in the Lucas Oil races and the TORC championships, flows into the production of these premium tyres.Off-road tyres for the whole Big Radar Renegade A/T AT5 265/65 R18 114H is a popular all-terrain tyre in a class of its own. Whether on sandy, rocky or muddy roads, or completely off-road, the tread pattern and durable compound of this model allow the Radar Renegade A/T AT5 265/65 R18 114H to be used as an on-road tyre but also off-road. Performance: 30% off-road - 70% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 114 Speed index: H M+S marking: yes Weight: 19,07kg per tyre Tyre type: Summer Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): E Fuel efficiency (A to G): E Tread Name: Renegade A/T AT5 When ordering, please let us know if the white lettering is to be fitted inside or outside. BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Complete wheelset Pirelli Scorpion A/T plus All Terrain 265/65R18 114T on Borbet CW7 alloy wheels Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T: Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges. Performance: 40% off-road - 60% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 114 Speed index: T 3PMSF Alpine symbol (so-called snowflake): yes Tyre type: All-season Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): D Fuel efficiency (A to G): D Weight: 18.72kg Tread Name: Scorpion A/T+ BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Complete wheelset Radar Renegade R/T + Mud Terrain 265/65R18 117Q on Borbet CW7 alloy wheels Premium off-road tyres Radar Renegade R/T+ 265/65 R18 117Q: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained in motorsport, countless victories in Lucas Oil races and TORC championships, flows into the production of these premium tyres.Off-road tyres for all the greatsRadar Renegade R/T+ 265/65 R18 117/114Q is a popular MUD Terrain tyre in a class of its own. Whether on sandy, rocky or muddy trails, or completely off-road. Also and especially recommended for racing. The tread design and the durable compound of the model Radar Renegade R/T+ 265/65 R18 117/114Q is especially suitable for off-road, SUV's and all 4x4 vehicles. Performance: 60% off-road - 40% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 117 Speed index: Q M+S marking: yes Weight: 22.94 per tyre Tyre type: Radial Tread Name: Renegade R/T+ PLEASE NOTE: This tyre is P.O.R. marked ("PROFESSIONAL OFF ROAD").The tyre does not have an M+S marking. It is therefore not approved for use in winter road conditions (according to §2 paragraph 3a sentence 1 and 2 of the StVO). We recommend the use of winter tyres in appropriate weather conditions. We will be happy to advise you on this. BORBET CW7 Leichtmetallfelge: Mit dem BORBET CW7 der Kategorie „Commercial Wheels“ präsentiert sich jetzt ein neues Rad, das nicht nur in puncto Design, sondern auch bei hohen Radlasten von bis zu 1.400 kg überzeugt.Das CW7 steht für eine neue prägnante Optik, die sich eben nicht nur über die Anzahl der Speichen definiert, sondern wie geschaffen ist für die echten Macher unter den Fahrzeugen. Vom Transporter über den Offroader bis zum Wohnmobil. Hersteller: Borbet Marke: CW7 Größe/Einpresstiefe: 7,5x18", ET 47 Farbe: wahlweise matt Schwarz oder matt Bronze Eignung: für Ineos Grenadier Gutachten: für 255/65R18 255/70R18 265/65R18 A01) K02) Lieferumfang: Felge, inkl. passende Radmuttern Hohe Radlast winterfest Lieferumfang: Felge, inkl. passende Radmuttern / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! Der Preis bezieht sich auf 4 bzw. 5 Kompletträder inkl. Montage und Wuchten. Bei diesem Artikel handelt es sich um Sperrgut.

Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design. With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: rim, incl. matching wheel nuts Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!

The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.