POWERspec Toyota Hilux 2.4/2.8D, from MY 2015, clutch kit The POWERspec is the next stage up, ideal if you use your Hilux as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description: Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Hilux Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery. Technical data: Transmission 3-stage planetary gear max. Tractive force 4300 kg max. Pulling speed 15 m/min* Motor power 3.8 hp Engine type Series Wound** Reduction ratio 110:1 Max. Power consumption 530 amps Voltage 12 V Rope (∅ x length) 10 mm x 30 m Drum (∅ x length) 63 x 223 mm Overall size (LxWxH) 574 x 160 x 225 mm Weight of cable winch 29.1 kg Weight of installation set 13.6 kg Total weight 42.7 kg Installation time 5 hours Features: Motor IP67 sealed by groove with sealing ring Freewheel lever Stainless steel cross braces Reinforced cable drum Powder-coated aluminium die-cast housing Motor/gearbox Internal drum brake with 3 brake shoes Removable control unit (so that the control unit can be installed as required) Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.

POWERspec Toyota Hilux 2.5 D-4D MY2002-2005,Toyota Land Cruiser 3.0 D-4D MY1998-2002 The POWERspec is the next stage up, ideal if you use your Hilux as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description: Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 9x Clutch cover bolts, coated in loctite 1x Hilux Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

POWERspec Toyota Hi-Lux 2.5 / 3.0 D-4D, MY2005-2015, clutch kit The POWERspec is the next stage up, ideal if you use your Toyota Hilux as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD Release bearing 9x Clutch cover bolts, coated in loctite 1x Hilux Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty  

Raised air intakes for various vehicles in black The snorkel not only allows safe driving through deeper water points with reduced risk for the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, the air filter must be replaced or cleaned less frequently. Available for the following vehicles:Ford Ranger PX (from BJ 2011)Nissan Navara D23 (from year 2015)Nissan Navara D40 / Pathfinder R51 (BJ 2005-2015)Toyota Hilux (BJ 2005-2015)Toyota Hilux (from BJ 2016) Please select the vehicle.