Escapade Constant Duty Compact  Onboard Air System For up to 37″ TiresP/N 50003 – 110/145 PSI – 150 PSI / 1.80 CFM VIAIR’s Escapade Constant Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 100% duty 450C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI  Max. Working Pressure: 150 PSI Max. Amp Draw: 23-Amps Ingress Protection Rating: IP67 Dimensions: 9.38″L x 4″W x 6.75″H Net Weight: 12.5 lbs. FEATURES 450C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) Extruded Aluminum Air Tank (1) Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) Tire Inflation Gun with 160 PSI Gauge (1) 30ft. Coil Hose with Quick Connect and Stud (1) Rubber Tipped Blow Gun (1) Quick Connect Coupler (Pre-installed) (1) 1/4″ 175 PSI Safety Valve (Pre-installed) (1) 1/4″ NPT Plugs Kit (Pre-installed) (1) 1/8″ Drain Cock (Pre-installed) (1) 1/4″ NPT to 1/8″ BSP Adaptors (2) Air Filter Housing w/ Replacement Air Filter Elements (1) 20ft. Freeze Resistant 12-Gauge Wire w/ Inline Fuse Holder (1) FILL RATES31″ X 10.5″ 0 to 30 PSI 4 min. 05 sec. (±10 sec.)15 to 30 PSI 2 min. 10 sec. (±05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 30 sec. (±15 sec.)15 to 30 PSI 2 min. 50 sec. (±05 sec.)35″ X 12.5″ 0 to 30 PSI 6 min. 55 sec. (± 15 sec.)15 to 30 PSI 3 min. 30 sec. (± 10 sec.)37″ X 12.5″0 to 30 PSI 7 min. 56 sec. (± 15 sec.)15 to 30 PSI 4 min. 09 sec. (± 10 sec.) Please Note: Use thread sealant for proper installation. Thread tape is not recommended.Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

Compressor set from VIAIR model 400P automatic with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version with ‘comfort operation’ As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:   Stainless steel valves guarantee long-lasting and optimum shut-off times generously dimensioned cooling fins on design-optimized cylinders ensure maximum air dissipation and longer service life Anodized cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life the motors are protected against splash water and are therefore highly resistant to corrosion integrated, automatic overheating protection protects the longevity of the compressors CE marking The VIAIR compressor kit model 400PA has the following scope of delivery: 9.5 meter spiral air hose  2.5 meter long battery cable with battery terminals  Tire inflator incl. pressure gauge  Aluminum stand or plate  Connection from the base to the compressor via vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  Three additional valve adapters a high-quality carrying bag The VIAIR compressor kit model 400PA has the following technical features: suitable for tyre sizes max. 35’  Automatic switch-off when no air is required. Simply press the inflation gun to switch the compressor on again  Delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  Max. air pressure: 10 bar  Max. voltage: 13.8 volts  max. current consumption: 30 amps  max. ambient temperature for operating the compressor: 70° Celsius  min. Ambient temperature for operating the compressor: -40° Celsius  max. possible operating time e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes  Dimensions: length 28 cm / width 15 cm / height 19 cm  Weight: 4.9 kg  Protection class: IP54  Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution?If you're stuck for ideas, our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and make the right choice quickly. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment.Our new compressor table compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory connection. The right compressor can be quickly determined at a glance. Our smallest model, the VIAIR 75P, is a compact mobile solution for emergencies or occasional off-road use with tyres up to 29’. The 75P is powered from the cigarette lighter. For larger tyres and rapid pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic switch-on and switch-off are recommended. If you are regularly in off-road use, need to inflate thick 37’ tyres or want to power pneumatic tools on the road, you should opt for the Constant Duty OnBoard-Air Kit for permanent installation.Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.Please note:We have adapted our Viair range. You will still find all standard products in our shop. One of the reasons we have decided to reduce the range is to guarantee better availability.

VIAIR 400P - Mobile compressor 12 Volt Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  tyre inflator incl. pressure gauge  aluminium stand or plate  connection from stand to compressor by vibration-reducing silent blocks  replaceable air filter  battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 12 Volt max. current consumption: 30 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. compressor should pause for approx. 40 minutes  with on/off switch  dimension: length 28 cm / width 15 cm / height 19 cm  weight: 4.8 Kg  protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: 0 to 2 bar - 3 min 00 sec.  1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  0 to 2 bar - 4 min 20 sec.  1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  0 to 2 bar - 5 min. 20 sec.  1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.  Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.