VIAIR 89P-RVS – Portable 12V Compressor for 4x4, Off-Road & Motorhomes

VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P.  Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck

Compressed air hose for VIAIR compessors Features: 0 - 200 PSI / 0 - 13,8 bar Close-Ended 1/4″ Quick Connect Coupler & Stud Deluxe Carry Bag Please note:The article does NOT fit the 440P compressor (since it has a 3/8 "connection).

VIAIR mounting kit for compressed air system Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/4” (F) NPT Tee Fitting (1) 1/4” to 1/8” NPT Reducer (1) 1/4” Quick Connect Coupler (1) 1/4” (F) NPT Quick Connect Stud (1) 1/4” (M) NPT Compression Fitting* (1) 1/4” (M) NPT Compression Tee Fitting* (3) Insulated (F) Terminal Connectors (2) Insulated (M) Terminal Connectors (2) Quick Splice Connectors (3) Ring Terminals (6) Cable Ties (3) Cable Tie Brackets (3) Air Line Clips (1) Continuous Grommet (2) Mounting Screws, Washers, Nuts (1) Instruction Manual * All compression fittings are for 1/8” O.D. air line.

Mounting kit for compressed air system Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/4” (F) NPT Tee Fitting (1) 1/4” to 1/8” NPT Reducer (1) 1/4” Quick Connect Coupler (1) 1/4” (F) NPT Quick Connect Stud (1) 1/4” (M) NPT Compression Fitting* (1) 1/4” (M) NPT Compression Tee Fitting* (3) Insulated (F) Terminal Connectors (2) Insulated (M) Terminal Connectors (2) Quick Splice Connectors (3) Ring Terminals (6) Cable Ties (3) Cable Tie Brackets (3) Air Line Clips (1) Continuous Grommet (2) Mounting Screws, Washers, Nuts (1) Instruction Manual * All compression fittings are for 1/8” O.D. air line.

VIAIR Air Connection Extension 5 Piece Kit Features: 1/4″ NPT (F) Quick Connect Coupler 1/4″ NPT (F) Quick Connect Stud (2) 1/4″ NPT Compression Fittings (For 1/4″ Line) 15 ft. Air Line Tubing 3 Air Line Clips 5″ Continuous Grommet

VIAIR Tank Port Fittings Kit for Compressors Set of 5 pieces, for 200 PSI rated systems. Features: 2 1/4" NPT-Plugs 1/4" NPT Drain Cock 1/4" NPT Compression Fitting 200 PSI Safety Valve

VIAIR Tyre Pressure Tester with Drain Function When driving on Sand it is a common practice to air-down the tires to gain more traction. The problem is should you air down to much, you risk damaging wheel and tire, and if you don't air-down enough the desired effect doesn't show. Also, after your done playing in the sand your tire pressure needs to get back to a comfortable riding pressure. In order for your tires to always have the right pressure this gauge also packs a deflate button, so you always know whats going on with out experimenting around. The Instuctions are simple and wel known from gas-stations: attatch, gauge the pressure, air down using the lever, gauge again and done. Available in two different versions, depending on the size and pressure range you're working in. Modell Diameter Pressure range 00032 38mm / 1.5" 0-4.1 bar (60 PSI) 90073 64mm / 2,5" 0-6.9 bar (100 PSI)  

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! The VIAIR 300P SXS Edition is based on the tried-and-tested, popular VIAIR 300P, but has been specially enhanced for use on side-by-side vehicles, ATVs, UTVs and quads. With additional features such as 2-pin SAE connectors, matching connection accessories and a customised carry bag, this set is particularly practical for off-road, leisure and work applications away from tarmac roads. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

VIAIR 89P-RVS – Portable 12V Compressor for 4x4, Off-Road & Motorhomes The VIAIR 89P-RVS is a powerful portable 12V compressor for demanding mobile use. With a maximum working pressure of 120 PSI / 8.2 bar, high air flow and a long 6 m air hose, it is particularly suitable for larger 4x4 vehicles, SUVs, campervans and motorhomes with large or high-pressure tyre combinations. Its strengths become especially apparent during off-road use. Reducing tyre pressure for improved traction and comfort on sand, gravel or rough terrain is common practice – but the tyres then need to be brought back to road pressure before continuing on paved roads. The 89P-RVS provides a compact and reliable solution for repeated airing down and airing up without depending on a petrol station or workshop compressor. The compressor is suitable for tyre sizes up to 245/70 R19.5 and can therefore also handle the higher tyre pressures typically found on heavier vehicles. Most Class B motorhome tyres, for example, can be inflated from 80 to 90 PSI / 5.5 to 6.2 bar in less than two minutes. Power is supplied directly from the vehicle battery via the supplied battery clamps. Combined with the 6 m air hose, this allows convenient access to front and rear tyres even on larger vehicles. Original VIAIR Part Number (P/N): 00089Model: VIAIR 89P-RVS Technical specifications: Operating voltage: 12 V Supply voltage: up to 13.8 V Maximum tyre size: 245/70 R19.5 Air flow at 0 bar: 41.7 l/min Air flow at 3 bar: 31.5 l/min Air flow at 5 bar: 23.6 l/min Air flow at 7 bar: 14.9 l/min Maximum working pressure: 120 PSI / 8.2 bar Maximum current draw: 20 A Duty cycle: 25 minutes at 30 PSI / approx. 2 bar Operating temperature: -20 °C to +70 °C Protection rating: IP53 Dimensions: approx. 25 × 8.1 × 14.2 cm Net weight: approx. 2.15 kg Power cable length: approx. 3 m Air hose length: approx. 6 m Integrated on/off switch Designed for demanding 4x4 and off-road use: Suitable for larger 4x4, SUV, campervan and motorhome tyre combinations Ideal for restoring road pressure after deliberately airing down tyres off-road High maximum pressure of 120 PSI / 8.2 bar Long 6 m air hose for easy access to all four wheels Direct connection to the vehicle battery for reliable power supply Solid brass screw-on tyre chuck Pressure gauge integrated into the compressor Stainless-steel valves for durability and consistent performance Anodised cylinder surface for increased wear resistance PTFE piston ring for low-friction operation and long service life Large cooling fins for efficient heat dissipation Integrated thermal overload protection Typical inflation times: 50 to 60 PSI / 3.4 to 4.1 bar: approx. 1 min. 11 sec. (± 5 sec.) 60 to 80 PSI / 4.1 to 5.5 bar: approx. 3 min. 28 sec. (± 10 sec.) 80 to 90 PSI / 5.5 to 6.2 bar: approx. 1 min. 40 sec. (± 5 sec.) Scope of delivery: 1 × VIAIR 89P-RVS 12V compressor 1 × approx. 6 m air hose 1 × approx. 3 m power cable with battery clamps 1 × solid brass screw-on tyre chuck 1 × integrated pressure gauge 3 × inflation adapters 1 × Presta valve adapter 1 × deluxe carry bag For 4x4 travel, expeditions and heavier vehicles Large tyre volumes and higher vehicle weights place considerably greater demands on a portable compressor than occasional pressure correction on a passenger car. The VIAIR 89P-RVS is designed for applications where tyre pressure needs to be adjusted reliably and repeatedly while travelling. This is particularly relevant for off-road driving: lowering tyre pressure can increase the tyre footprint and improve traction and ride comfort on loose or uneven surfaces. Before returning to normal road use, the tyres must be inflated to the pressure specified for the vehicle. A portable compressor such as the 89P-RVS makes this possible independently of external compressed-air supplies. The combination of compact dimensions, direct battery connection, high working pressure and a 6 m hose makes the compressor particularly practical for 4x4 touring, overlanding, campervans and motorhomes. Note on off-road use: When operating the compressor in dusty or sandy environments, it should be positioned away from loose dust and dirt whenever possible. Operation directly on sandy or dusty ground should be avoided. An elevated and preferably protected position, for example inside the vehicle or on the load area, helps to minimise the intake of fine particles. For particularly intensive continuous operation, very large tyre volumes or extreme off-road applications, a larger VIAIR compressor may be the more suitable choice. Suitable alternatives from the VIAIR range: VIAIR 400P-A portable 12V compressor with automatic shut-off VIAIR 450P-A portable 12V compressor with automatic shut-off

Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 24 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: stainless steel valves guarantee long-lasting and optimum shut-off times generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life anodised cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics the motors are protected against splash water and thus maximally resistant to corrosion an integrated, automatic overheating protection protects the longevity of the compressors CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  Tyre inflator incl. pressure gauge  Aluminium stand or plate  Connection from stand to compressor by vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 24Volt max. current consumption: 15 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. with on/off switch  Dimension: length 28 cm / width 15 cm / height 19 cm  Weight: 4,8 Kg  Protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: - 0 to 2 bar - 3 min 00 sec. - 1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  - 0 to 2 bar - 4 min 20 sec. - 1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  - 0 to 2 bar - 5 min. 20 sec. - 1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things. 

Compressor set from VIAIR model 400P automatic with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version with ‘comfort operation’ As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:   Stainless steel valves guarantee long-lasting and optimum shut-off times generously dimensioned cooling fins on design-optimized cylinders ensure maximum air dissipation and longer service life Anodized cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life the motors are protected against splash water and are therefore highly resistant to corrosion integrated, automatic overheating protection protects the longevity of the compressors CE marking The VIAIR compressor kit model 400PA has the following scope of delivery: 9.5 meter spiral air hose  2.5 meter long battery cable with battery terminals  Tire inflator incl. pressure gauge  Aluminum stand or plate  Connection from the base to the compressor via vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  Three additional valve adapters a high-quality carrying bag The VIAIR compressor kit model 400PA has the following technical features: suitable for tyre sizes max. 35’  Automatic switch-off when no air is required. Simply press the inflation gun to switch the compressor on again  Delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  Max. air pressure: 10 bar  Max. voltage: 13.8 volts  max. current consumption: 30 amps  max. ambient temperature for operating the compressor: 70° Celsius  min. Ambient temperature for operating the compressor: -40° Celsius  max. possible operating time e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes  Dimensions: length 28 cm / width 15 cm / height 19 cm  Weight: 4.9 kg  Protection class: IP54  Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution?If you're stuck for ideas, our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and make the right choice quickly. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment.Our new compressor table compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory connection. The right compressor can be quickly determined at a glance. Our smallest model, the VIAIR 75P, is a compact mobile solution for emergencies or occasional off-road use with tyres up to 29’. The 75P is powered from the cigarette lighter. For larger tyres and rapid pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic switch-on and switch-off are recommended. If you are regularly in off-road use, need to inflate thick 37’ tyres or want to power pneumatic tools on the road, you should opt for the Constant Duty OnBoard-Air Kit for permanent installation.Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.Please note:We have adapted our Viair range. You will still find all standard products in our shop. One of the reasons we have decided to reduce the range is to guarantee better availability.

Reliable compressed air everywhere – VIAIR 400P mobile Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  tyre inflator incl. pressure gauge  aluminium stand or plate  connection from stand to compressor by vibration-reducing silent blocks  replaceable air filter  battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 12 Volt max. current consumption: 30 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. compressor should pause for approx. 40 minutes  with on/off switch  dimension: length 28 cm / width 15 cm / height 19 cm  weight: 4.8 Kg  protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: 0 to 2 bar - 3 min 00 sec.  1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  0 to 2 bar - 4 min 20 sec.  1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  0 to 2 bar - 5 min. 20 sec.  1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.  Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.