VIAIR Air Source Relocation Kit

VIAIR replacement metal filter housing Suitable for the following VIAIR compressors: 420C Compressor460C Compressor480C Compressor300P Portable Compressor300P-RVS Portable Compressor400P Portable Compressor400P Automatic Portable Compressor400P-RV Automatic Portable Compressor400P-RVS Automatic Portable Compressor440P Portable Compressor450P Automatic Portable Compressor450P-RV Automatic Portable Compressor450P-RVS Automatic Portable Compressor

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! The VIAIR 300P SXS Edition is based on the tried-and-tested, popular VIAIR 300P, but has been specially enhanced for use on side-by-side vehicles, ATVs, UTVs and quads. With additional features such as 2-pin SAE connectors, matching connection accessories and a customised carry bag, this set is particularly practical for off-road, leisure and work applications away from tarmac roads. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

Escapade Constant Duty Compact  Onboard Air System For up to 37″ TiresP/N 50003 – 110/145 PSI – 150 PSI / 1.80 CFM VIAIR’s Escapade Constant Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 100% duty 450C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI  Max. Working Pressure: 150 PSI Max. Amp Draw: 23-Amps Ingress Protection Rating: IP67 Dimensions: 9.38″L x 4″W x 6.75″H Net Weight: 12.5 lbs. FEATURES 450C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) Extruded Aluminum Air Tank (1) Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) Tire Inflation Gun with 160 PSI Gauge (1) 30ft. Coil Hose with Quick Connect and Stud (1) Rubber Tipped Blow Gun (1) Quick Connect Coupler (Pre-installed) (1) 1/4″ 175 PSI Safety Valve (Pre-installed) (1) 1/4″ NPT Plugs Kit (Pre-installed) (1) 1/8″ Drain Cock (Pre-installed) (1) 1/4″ NPT to 1/8″ BSP Adaptors (2) Air Filter Housing w/ Replacement Air Filter Elements (1) 20ft. Freeze Resistant 12-Gauge Wire w/ Inline Fuse Holder (1) FILL RATES31″ X 10.5″ 0 to 30 PSI 4 min. 05 sec. (±10 sec.)15 to 30 PSI 2 min. 10 sec. (±05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 30 sec. (±15 sec.)15 to 30 PSI 2 min. 50 sec. (±05 sec.)35″ X 12.5″ 0 to 30 PSI 6 min. 55 sec. (± 15 sec.)15 to 30 PSI 3 min. 30 sec. (± 10 sec.)37″ X 12.5″0 to 30 PSI 7 min. 56 sec. (± 15 sec.)15 to 30 PSI 4 min. 09 sec. (± 10 sec.) Please Note: Use thread sealant for proper installation. Thread tape is not recommended.Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

TLC PLUS Automatic Portable Compresso Viair Part No. 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance ultra compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. The TLC series is designed not only for off-road riders but also for cyclists. Thanks to the valve adapters supplied and the small integrated pressure reservoirs on the compressors, it is particularly well suited for fitting tubeless bicycle tyres. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering.  

VIAIR tyre inflator gun with integrated bleed valve Reads pressure up to 200 PSI and 14 BAR. This useful tool has a normally closed air chuck that can be opened by pressing the lever on the tyre inflator gun. Since the air chuck is normally closed, the tyre inflator gun is a perfect complement to on-board air systems and VIAIR's line of automatic shut-off portable compressors.Please note: Only compatible with VIAR portable compressors with automatic shut-off.- Integrated bleed valve for pressure regulation.- Air chuck with locking lever- 1/4″ quick connector- Closed release valve

VIAIR 89P-RVS – Portable 12V Compressor for 4x4, Off-Road & Motorhomes The VIAIR 89P-RVS is a powerful portable 12V compressor for demanding mobile use. With a maximum working pressure of 120 PSI / 8.2 bar, high air flow and a long 6 m air hose, it is particularly suitable for larger 4x4 vehicles, SUVs, campervans and motorhomes with large or high-pressure tyre combinations. Its strengths become especially apparent during off-road use. Reducing tyre pressure for improved traction and comfort on sand, gravel or rough terrain is common practice – but the tyres then need to be brought back to road pressure before continuing on paved roads. The 89P-RVS provides a compact and reliable solution for repeated airing down and airing up without depending on a petrol station or workshop compressor. The compressor is suitable for tyre sizes up to 245/70 R19.5 and can therefore also handle the higher tyre pressures typically found on heavier vehicles. Most Class B motorhome tyres, for example, can be inflated from 80 to 90 PSI / 5.5 to 6.2 bar in less than two minutes. Power is supplied directly from the vehicle battery via the supplied battery clamps. Combined with the 6 m air hose, this allows convenient access to front and rear tyres even on larger vehicles. Original VIAIR Part Number (P/N): 00089Model: VIAIR 89P-RVS Technical specifications: Operating voltage: 12 V Supply voltage: up to 13.8 V Maximum tyre size: 245/70 R19.5 Air flow at 0 bar: 41.7 l/min Air flow at 3 bar: 31.5 l/min Air flow at 5 bar: 23.6 l/min Air flow at 7 bar: 14.9 l/min Maximum working pressure: 120 PSI / 8.2 bar Maximum current draw: 20 A Duty cycle: 25 minutes at 30 PSI / approx. 2 bar Operating temperature: -20 °C to +70 °C Protection rating: IP53 Dimensions: approx. 25 × 8.1 × 14.2 cm Net weight: approx. 2.15 kg Power cable length: approx. 3 m Air hose length: approx. 6 m Integrated on/off switch Designed for demanding 4x4 and off-road use: Suitable for larger 4x4, SUV, campervan and motorhome tyre combinations Ideal for restoring road pressure after deliberately airing down tyres off-road High maximum pressure of 120 PSI / 8.2 bar Long 6 m air hose for easy access to all four wheels Direct connection to the vehicle battery for reliable power supply Solid brass screw-on tyre chuck Pressure gauge integrated into the compressor Stainless-steel valves for durability and consistent performance Anodised cylinder surface for increased wear resistance PTFE piston ring for low-friction operation and long service life Large cooling fins for efficient heat dissipation Integrated thermal overload protection Typical inflation times: 50 to 60 PSI / 3.4 to 4.1 bar: approx. 1 min. 11 sec. (± 5 sec.) 60 to 80 PSI / 4.1 to 5.5 bar: approx. 3 min. 28 sec. (± 10 sec.) 80 to 90 PSI / 5.5 to 6.2 bar: approx. 1 min. 40 sec. (± 5 sec.) Scope of delivery: 1 × VIAIR 89P-RVS 12V compressor 1 × approx. 6 m air hose 1 × approx. 3 m power cable with battery clamps 1 × solid brass screw-on tyre chuck 1 × integrated pressure gauge 3 × inflation adapters 1 × Presta valve adapter 1 × deluxe carry bag For 4x4 travel, expeditions and heavier vehicles Large tyre volumes and higher vehicle weights place considerably greater demands on a portable compressor than occasional pressure correction on a passenger car. The VIAIR 89P-RVS is designed for applications where tyre pressure needs to be adjusted reliably and repeatedly while travelling. This is particularly relevant for off-road driving: lowering tyre pressure can increase the tyre footprint and improve traction and ride comfort on loose or uneven surfaces. Before returning to normal road use, the tyres must be inflated to the pressure specified for the vehicle. A portable compressor such as the 89P-RVS makes this possible independently of external compressed-air supplies. The combination of compact dimensions, direct battery connection, high working pressure and a 6 m hose makes the compressor particularly practical for 4x4 touring, overlanding, campervans and motorhomes. Note on off-road use: When operating the compressor in dusty or sandy environments, it should be positioned away from loose dust and dirt whenever possible. Operation directly on sandy or dusty ground should be avoided. An elevated and preferably protected position, for example inside the vehicle or on the load area, helps to minimise the intake of fine particles. For particularly intensive continuous operation, very large tyre volumes or extreme off-road applications, a larger VIAIR compressor may be the more suitable choice. Suitable alternatives from the VIAIR range: VIAIR 400P-A portable 12V compressor with automatic shut-off VIAIR 450P-A portable 12V compressor with automatic shut-off

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

Compressed air hose for VIAIR compessors Features: 0 - 200 PSI / 0 - 13,8 bar Close-Ended 1/4″ Quick Connect Coupler & Stud Deluxe Carry Bag Please note:The article does NOT fit the 440P compressor (since it has a 3/8 "connection).

6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P.  Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck